We are the prominent Manufacturer & Supplier of high performance Digital Torsion Testing Machine. Fabricated using high-grade parts and components, our Digital Torsion Testing Machine is acknowledged for excellent performance, high strength, accurate results and longer service life. Our machine is thoroughly inspected by our quality analysts and complies with the set standards. We make available our Digital Torsion Testing Machine at market leading rates.

Features :

• 5 Digit 7 Segment ½ inch Red LED Display for LOAD Indication
• 4 Digit 7 Segment ½ inch Red LED Display for Angle of Rotation
• 2 Digit 7 Segment ½ inch Red LED Display for Number of Rotation
• Selection of Units Kgm or Nm for load
• Selection of Units Deg or Rad for Angle of Rotation
• Real Time Clock for report generation
• Password to safeguard unauthorized access for calibration and other important settings
• Multifunction Keyboard to select the parameters
• Data storage of last 25 Test Reports. The data of all the settings and reports is in memory even if power is absent.
• Report Printing facility on DOT MATRIX 80 column printer
• Rs232 communication facility(optional)
• Potential free NO contact(rated 2A @ 230Vac) to START/STOP TEST cycle.
• Safety Fuse Link(20mm) rated 230V, 1A provided inside the controller

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SSS Make Analog Cum Computerised Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal of OperationOperation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.

Electronic Control Panel

• The electronic control panel is built using  microprocessor which incorporates state of the art technology with following features :
• Front panel membrane type key board for test setup.
• 7 seg digital display of load displacement / extension. Printer port interface
• Serial port for communication with Pc.
• Optional add-on facility for electronic extensometers & electronic load pacer
• Storage of important parameters such as peak load, displacement at peak load & maximum displacement alter test.
• Period selection to take care of initial slippage

Serial Communication & Software Package On PCThe SSS-UTM(M)(E) series control panel can be hooked to any PC using RS-232 communication port. offers different exhaustive application. Window based software packages on PC to enable the user to effectively evaluate different parameters.

The features include :

• User friendly main menu with pop up menus prompt messages and help windows.
• Extensive graphics on screen for curve plotting, magnification and zooming.
• Evaluation of wide range of user selectable parameters such as young's modulus. yield stress. proof stress etc.
• Advanced file handling for data storage. Printout option for reports. data and graph etc.
• Optional software package for statistical evaluation.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SSS Make Hydraulic Grip Front Loading Computerized Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal of Operation :

• Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram.
• Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder.
• The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.

Salient Features :

• Open type cross head
• Hydraulic wedge action grips
• Long test stroke and dual test space
• Loading accuracy as high as ± 1%
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behaviour of the material.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.
• Manual control & release valve operation.
• Load Capacity : 100 kN, 200 kN, 400 kN, 600 kN, 1000 kN, 1200 kN and 1500 kN.

Optional :

• Servo controlled Motorized Valve incorporating of control modes - Standard manual control, Load rate control, Elongation rate control,  Load hold mode,  Auto start & initial valve open start.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SSS make TNE series machines are electronic screw driven machines with precision screw and column construction and variable speed drive. These are high precision, high performance universal testing machines, maximum capacity up to 100 kN. With the help to computer and micro-computer, all the operations from control of load to processing of data are carried out with excellent performance, reliability, flexibility and easy operation.
The machines are suitable for studying mechanical behavior of various materials like iron and metals, rubbers, plastics, ceramics, fabrics, composites, cables and wires. As a matter of fact, it is an indispensable instrument for the modern industries. Two options are available mainly acme threaded screw with DC motor drive and ball lead screw with servo drive. The machines confirm to IS, BS & ASTM standards.

Machine Features :

• Computer controlled mechanism under windows 2000/XP
• Variable speed drive with DC / AC servo drive options.
• Automatic identification and interchangeability of load cells.
• Different clamping devices to suit specific test requirement.
• Safety interlock by end limit switches and by overload sensing.

TNE Series : Depending upon test requirements and budget, TNE series machines are available with following options.

DRIVE - DD : DC motor with thyrister drive to give speed ratio of 1:10 as standard and 1:100 as optional.

DRIVE - SD : Servo motor & PWM drive to give speed ratio of 1:1000.

Economical Models : These machines are with a rigid, stable structure with high stiffness, two columns and a single screw. Machine uses three phase induction motor with fixed speed as standard. A variable speed drive is available as option.

Load Cells :Universal load cells of following capacities are available. - 50N, 100N, 250N, 500N. 1kN, 2.5kN, 5kN, 10kN, 25kN, 50kN, 100kN. Any other load cell as per requirement.

Grips and Clamping Device :

• Wedge type grips for flat / round specimen.
• Compression plate.
• Special grips as per requirement.
• Vise type grips.
• Bending fixture.
• Shear attachment.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Erichsen Testing Machine, we offer, is fabricated from high-grade materials, in compliance with the standards. The machine is reckoned upon for functioning in a speedy and hassle-free way. Its deep drawing test is well acclaimed in the entire industry. It is specially designed to perform Erichsen Cupping Test on metals. And its convenient clamping makes it stand out. We are counted among the leading Manufacturers and Suppliers of Erichsen Testing Machine in Maharashtra.   

Details :

• Suitable for cupping tests on sheet metals.
• Having thickness from 0.1 to 2 mm.
• Least count of measurement - 0.01 mm.

Installation :

• It is recommended that the machine is mounted on a rigid table.
• SSS reserves rights of change in the above specifications due to constant improvement of the design.
• The dimensions given above are all approximate.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

We are the prominent Manufacturer & Supplier of high performance Digital Torsion Testing Machine. Fabricated using high-grade parts and components, our Digital Torsion Testing Machine is acknowledged for excellent performance, high strength, accurate results and longer service life. Our machine is thoroughly inspected by our quality analysts and complies with the set standards. We make available our Digital Torsion Testing Machine at market leading rates.

Features :

• 5 Digit 7 Segment ½ inch Red LED Display for LOAD Indication
• 4 Digit 7 Segment ½ inch Red LED Display for Angle of Rotation
• 2 Digit 7 Segment ½ inch Red LED Display for Number of Rotation
• Selection of Units Kgm or Nm for load
• Selection of Units Deg or Rad for Angle of Rotation
• Real Time Clock for report generation
• Password to safeguard unauthorized access for calibration and other important settings
• Multifunction Keyboard to select the parameters
• Data storage of last 25 Test Reports. The data of all the settings and reports is in memory even if power is absent.
• Report Printing facility on DOT MATRIX 80 column printer
• Rs232 communication facility(optional)
• Potential free NO contact(rated 2A @ 230Vac) to START/STOP TEST cycle.
• Safety Fuse Link(20mm) rated 230V, 1A provided inside the controller

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SSS Make Analog Cum Computerised Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal of OperationOperation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.

Electronic Control Panel

• The electronic control panel is built using  microprocessor which incorporates state of the art technology with following features :
• Front panel membrane type key board for test setup.
• 7 seg digital display of load displacement / extension. Printer port interface
• Serial port for communication with Pc.
• Optional add-on facility for electronic extensometers & electronic load pacer
• Storage of important parameters such as peak load, displacement at peak load & maximum displacement alter test.
• Period selection to take care of initial slippage

Serial Communication & Software Package On PCThe SSS-UTM(M)(E) series control panel can be hooked to any PC using RS-232 communication port. offers different exhaustive application. Window based software packages on PC to enable the user to effectively evaluate different parameters.

The features include :

• User friendly main menu with pop up menus prompt messages and help windows.
• Extensive graphics on screen for curve plotting, magnification and zooming.
• Evaluation of wide range of user selectable parameters such as young's modulus. yield stress. proof stress etc.
• Advanced file handling for data storage. Printout option for reports. data and graph etc.
• Optional software package for statistical evaluation.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SSS Make Hydraulic Grip Front Loading Computerized Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal of Operation :

• Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram.
• Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder.
• The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.

Salient Features :

• Open type cross head
• Hydraulic wedge action grips
• Long test stroke and dual test space
• Loading accuracy as high as ± 1%
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behaviour of the material.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.
• Manual control & release valve operation.
• Load Capacity : 100 kN, 200 kN, 400 kN, 600 kN, 1000 kN, 1200 kN and 1500 kN.

Optional :

• Servo controlled Motorized Valve incorporating of control modes - Standard manual control, Load rate control, Elongation rate control,  Load hold mode,  Auto start & initial valve open start.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

SSS make TNE series machines are electronic screw driven machines with precision screw and column construction and variable speed drive. These are high precision, high performance universal testing machines, maximum capacity up to 100 kN. With the help to computer and micro-computer, all the operations from control of load to processing of data are carried out with excellent performance, reliability, flexibility and easy operation.
The machines are suitable for studying mechanical behavior of various materials like iron and metals, rubbers, plastics, ceramics, fabrics, composites, cables and wires. As a matter of fact, it is an indispensable instrument for the modern industries. Two options are available mainly acme threaded screw with DC motor drive and ball lead screw with servo drive. The machines confirm to IS, BS & ASTM standards.

Machine Features :

• Computer controlled mechanism under windows 2000/XP
• Variable speed drive with DC / AC servo drive options.
• Automatic identification and interchangeability of load cells.
• Different clamping devices to suit specific test requirement.
• Safety interlock by end limit switches and by overload sensing.

TNE Series : Depending upon test requirements and budget, TNE series machines are available with following options.

DRIVE - DD : DC motor with thyrister drive to give speed ratio of 1:10 as standard and 1:100 as optional.

DRIVE - SD : Servo motor & PWM drive to give speed ratio of 1:1000.

Economical Models : These machines are with a rigid, stable structure with high stiffness, two columns and a single screw. Machine uses three phase induction motor with fixed speed as standard. A variable speed drive is available as option.

Load Cells :Universal load cells of following capacities are available. - 50N, 100N, 250N, 500N. 1kN, 2.5kN, 5kN, 10kN, 25kN, 50kN, 100kN. Any other load cell as per requirement.

Grips and Clamping Device :

• Wedge type grips for flat / round specimen.
• Compression plate.
• Special grips as per requirement.
• Vise type grips.
• Bending fixture.
• Shear attachment.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Erichsen Testing Machine, we offer, is fabricated from high-grade materials, in compliance with the standards. The machine is reckoned upon for functioning in a speedy and hassle-free way. Its deep drawing test is well acclaimed in the entire industry. It is specially designed to perform Erichsen Cupping Test on metals. And its convenient clamping makes it stand out. We are counted among the leading Manufacturers and Suppliers of Erichsen Testing Machine in Maharashtra.   

Details :

• Suitable for cupping tests on sheet metals.
• Having thickness from 0.1 to 2 mm.
• Least count of measurement - 0.01 mm.

Installation :

• It is recommended that the machine is mounted on a rigid table.
• SSS reserves rights of change in the above specifications due to constant improvement of the design.
• The dimensions given above are all approximate.

NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.