S.S. Gas Lab Asia Pvt. Ltd.

Jhilmil Industrial Area, Delhi

Triple axle running gear suitable for co2 road tanker duly mounted with all fittings of required i.e. electrical, air brake and 6 pipe for keeping ss hose of 5 meter. all materials shall be of top quality and final finish of paint etc. To make if export worthy

The post harvest loss of food grains during storage or transport continues to be a serious problem to be resolved. The last decade witnessed a great imbalance between emphasis on improved technology to enhance the crop production and dearth of effective post harvest technology to protect the harvest grains from insects, mites, rodents, fungi and bacteria until it reaches the consumer. In fact, more than 4.0 million tones of food grains is lost per year and the cost to the economy due to this loss is enormous.
Therefore construction of sophisticated structures for grain storage and transportation, equipped with drying, aeration and fumigation facilities is the most important element in a strategy to save grains and some units have already installed in India at different ports in the country.
Today and more and more in future, chemical pest control and other traditional methods of food grain preservation is becoming unacceptable and CO2 gas is being increasingly used for this application.
Toxic Substances have so far been used to control/destroy insects e.g. Ethylene Dioxide is used for disinfestations of foods but these toxic substances are coming in for increasingly stronger criticism. Substances like Methyle Bromide, Hydrogen Phosphide etc. also face the problem of residue seriously. Therefore, research was undertaken to substitute and supersede such chemicals with natural residue-free and environment friendly disinfestations process.
In this new process of fumigation evolved the originally packed agricultural product is exposed to pressurized CO2 atmosphere. The infestation is done on the optimum condition and cycle time of few hours is required for the products which have to be fumigated. No special pre or after treatment is necessary. Products are taken to a special enclosure and the enclosure is flooded with gaseous CO2 to the required final pressure for a pre determined period of time.

We specialize in providing storage systems and transportation tankers for pressurized, liquifeid industrial gases. we design these systems on all international codes like asme, ped, bs etc. our tanks systems are fitted with safety valves and internal refrigeration systems (in case of pu insulated tanks). The entire tank is of special low temperature steel and the entire welding is first x-rayed and then stress relieved, under third party inspection. the tank refrigeration system has the german bitzer bock compressors and world famous siemens abb motors. refrigeration is fitted with all the controls. we have supplied many of these storage tanks and transportation tankers to many world famous companies and national giants.

GASLAB Carbon  capture and sequestration  technologies  are extending the environmental viability of traditional energy sources such as coal, oil and natural gas. Innovative sequestration products  improve  feasibility of low cost carbon  capture. 

• Complete suite of the state- of- the- art carbon capture and Sequestration technologies.
• High oxygen tolerance, low energy recovery, and high loadbility solvents available.
• End to end CC&S solutions for chemical, oil & gas and power sectors.
• Ministry of science and technology recognized in-house R&D facility.

For analyzing the percentage of O2/ CO2 in flue gases this Flue Gas Analyzer stands temperature range from -35 Degree C to 65 Degree C and offers a scale reading.

Special purity measuring burette for gaseous CO2 Exactitude of measurement upto 0.1% by volume. The material that is used for the production complies with high quality standards and quality-proved by the experts. Also, we make sure that the raw material is sourced from the trusted places. We are positioned amidst the renowned names supplying finest array of CO2 Purity Tester.

Our policies regarding payment are simple and quick. We have ethical business standards, and we make sure our patrons can make payment securely along with documentation. Using ultramodern packaging equipment and superior grade materials, we secure our products and make them safe from external damages. In addition, the packs are labeled properly for information.

Specifications :

• Dimension : 124 x 110 x 217 mm.
• Output : 500 gms Dry Ice.

CO2 manifold system enables a consumer to draw CO2 gas at a single point and avoids mishandling of CO2 cylinders at different locations at the shop floor.  This battery system for using the cylinders at one point eliminates the carriage of individual cylinders at different locations where MIG welding sets/user/water dosing systems are located.  With our Pressure Reduction Station the pressure of the gas is reduced at the battery itself so that low-pressure gas (as required by the user) is sent through the pipeline.  With proper instrumentation and inter-locking, a safe system is designed for trouble free service.  The system consists of minimum two links whereas one is connected with the outlet and other with inlet.
CO2 is transported in liquid phase either in cylinders or in storage tankers but it is used in gaseous state in beverages and other uses. CO2 is evaporated and expanded to lower pressure, in this expansion operation cooling occurs which can choke the entire system, resulting in pressure oscillation and CO2 losses can take place.  SSGLA system avoids all such problems. The main equipment out of this is the SSGLA Filter cum SCRS system, with which we can achieve the following advantages.

• No internal freezing.
• No pressure oscillation.
• Clean CO2 as the impurities get filtered off.
• No interruption in CO2 supply during cylinder change.  Saving of energy, CO2 and time are the main advantage.
• No outside heater/steam required.
• Neat and clean system which leads to near surroundings.
• No full time operator required.

  Our system makes it possible to supply gaseous CO2 at any desired outlet pressure.

The SSGLA atmospheric CO2 vaporizer is the most economical solution for vaporizing liquid CO2. It uses free ambient air to achieve energy savings of over 95% compared to standard electric vaporizers. Therefore, electric savings can pay for a new atmospheric CO2 vaporizer in less than one year in most of the cases.
SSGLA atmospheric CO2 vaporizers are supplied as one unit and are ready for use. Max. allowable working pressure 25 bar.

Two options are available :

• Copper tubing
• Stainless steel tubing.

The SSGLA CO2 cylinder filling system has been designed to accurately fill CO2 cylinders by weight. Two filling stands and twin fill control box are included as standard.
The SSGLA CO2 cylinder filling system has been developed as a universal unit to accurately fill high pressure CO2 cylinders by weight. The filling rate is 800 kg/hr and the filling pressure is up to 130 bar. This system comprises of a low to high pressure liquid CO2 transfer pump, two electronic weighing indicators with weighing platforms, filling stands and quick connect filling heads and twin fill control box.

Application :

• To fill liquid CO2 into high pressure CO2 cylinders
• To fill fire extinguishers with CO2
• While one cylinder is being filled the other one is being prepared for filling.

Fiberglass Cooling TowersS.S. Gas Lab fiberglass cooling towers are developed from reinforced fiber glass and fiber reinforced plastic (F.R.P) casing. Metallic parts of the tower are completely galvanized/ powder coated/ epoxy coated. The steel and wooden tower case results in corrosion resistance and reduction in dry rot problems. Air IntakeThe bottle type design of our towers is highly resistant to strong winds and takes in air from all directions. Thus, it provides greater flexibility in the selection of site as it can be installed irrespective of the prevailing wind direction. Axial FanDirectly driven axial fan is designed to ensure minimum power consumption, operational noise and operating costs. It is completely free from all problems occurring due to belt & gear drives. Drift EliminatorMulti blade rotary drift eliminator is specially designed to reduce the carry over losses. Due to the drift eliminator, the drift loss is never beyond 0.3% to 5%. Water BasinThe F.R.P water collection sump configured in our towers is leak proof and avoid spillage. Multiple Arm Rotary SprinklerWater distribution becomes highly efficient & orifice blockages are not easily compromised. Contact Area & Heat TransferHoney comb fills provide more contact area by breaking air & water into several segments uniformly. Long LifeThree to four times more life as compared to ordinary towers. Fungus FreeOur towers are free from fungus as no wood is used therein. Easy PlumbingOur cooling towers come with ready connections. Light & CompactEfficient modular designed allows it to occupy less operational space. Floor area is about 0.5 sq. ft per ton & it weights 15 to 20 kg / RT. Advantages of S.S. Gas Lab cooling towers are specified below :

• Minimum maintenance required and they have 500% more life than conventional towers.
• Uniform air distribution.
• Optimum heat dissipation.
• Low make-up volume cuts down the water requirement & related costs.
• Light weight, rust free parts developed from synthetic material.
• Highly resistant against strong winds, sudden and serve vibrations.
• Ready assembly, dis-assembly and direct access to internal parts.
• Leak proof F.R.P resin.

Elecrical Panels

PU Insulated with fibre glass body. These storage boxes ensure minimal evaporation and quite sturdy for transportation. We make sure the ranges of product we offer purchasers with are as per global quality management standards. Well-established as a notable name, we cater to the demands of customers from Delhi(India) to every nook and corner.

SSGLA Dry Ice Machine produces dry ice blocks from 30mm to 80mm thickness and the size is 200mm x 100mm. Compact design, Sturdy hydraulic system, PLZ Control stainless steel chamber are just a few highlights.

• Semi-automatic operation.
• Slice thickness adjustable
• Simple and quick installation
• Quality components.
• Provision for revert gas recovery.