SRS Pumps

Kandivali, Mumbai, Maharashtra

high pressure pumps are designed and manufactured by srs pumps with advanced pump technology which ensure quality, reliability and efficiency. Our high pressure pumps are horizontal, simplex or triplex positive displacement plunger pumps.

our high pressure equipments is the most versatile, time-and-cost effective solution for cleaning, cutting, removing, descaling, testing, spraying etc.

design:

pump drive end assemblies are of rugged construction with high quality materials and heavy duty taper roller bearings. Bearings are lubricated by splash lubrication. Pumps are designed to permit rapid and economical maintenance, particularly regarding plunger, packing and valves are manufactured to ensure accurate alignment on reassembly.

applications:

• hydro testing.
• chemical injections.
• cleaning of tanks, vessels, tube bundles of heat exchangers.
• r.o. Plant applications
• removing oil & chemical build up sludge.
• boiler feed, etc.

liquid ends:

liquid ends can be offered in s.s 304, s.s.316, s.s. 316 l, hastelloy b or c, alloy 20, etc.capacity max - 25000 lphpressure max - 350 bar

technical specifications:

• pump type - horizontal , triplex reciprocating plunger pump
• max working pressure - 30, 000 psi
• max discharge - 12 lpm
• max power - 10 hp
• duty - intermittent
• stroke length - 32 mm
• power drive - electric motor / diesel engine
• mounting - base plate / skid / trolley
• power end connection - pulley driven / gear reduction
• dry weight of pump - 25 kgs (bare shaft )

working principle:

fluid can be accelerated to very high velocities through a nozzle by the application of sufficient hydraulic horsepower. Hydraulic horsepower is proportional to the product of fluid pressure and the volume delivered. Fluid velocity is proportional to the pressure developed through a nozzle orifice. The impact of high pressure fluid jets can remove deposits which defy mechanical cutting tools, without any damage to underlying materials by correct selection of nozzles, accessories and power sources.

the high pressure unit consists of the following:

• high pressure reciprocating (simplex / duplex / triplex) pump.
• prime mover : electric motor / diesel engine.
• mounting : base plate / trolley / trailer.
• pulley set with belts and guard or coupling with guard.
• standard accessories : pressure gauge, pressure regulating valve, safety valve, strainer.
• cleaning accessories (optional)

interchangeable conversion kits are available for all pump units so that the pressure/volume relationship can be altered to suit a particular operation without altering the pump speed, thus maintaining efficient working of the drive motors.

SRS Pumpsis a manufacturer of domestic and industrial diaphragm type dosing pumps, hydraulic diaphragm pumps, shaped diaphragm pumps and air-operated double diaphragm pumps.

Hydraulic Diaphragm Pump:

In hydraulic pump the process liquid is isolated from plunger by hydraulic oil and a diaphragm. Normally Teflon is used as a diaphragm material due to its flexibility and corrosion resistivity.

Hydraulic diaphragm pumps are recommended for the applications where the leakage is not at all permitted. It provides an integral safety valve which can automatically protect the diaphragm while the fluctuation in the line.

Shaped Diaphragm Pump:

Shaped diaphragm pumps (Mechanically Operated Diaphragm Pump) without gland packing and hydraulic oil can be offered for dosing chemicals and other liquids. Here the shaped diaphragm is directly connected to the reciprocating mechanical parts from the connecting rod mechanism. Viton, Neoprene or Teflon faced rubber are working as a diaphragm material.

Single Diaphragm Pumps:

A single diaphragm separates the wetted area from the hydraulic chamber. During the discharge stroke the diaphragm is balanced by the hydraulic liquid only.

Double Diaphragm Pumps:

When the liquid being is highly corrosive, the backup diaphragm will keep the liquid out of pump body in the primary diaphragm, allowing the diaphragm to be replaced before the pump is damaged.

Sandwich Diaphragm Pumps:

It's two identical diaphragms mounted together and operating as one piece. Since either diaphragm is capable of full pump performance, each is the backup of the other. Should one fail, operation continues without interruption on the other, there is no leakage or air sucked into the process and no mixing of the process fluid with the hydraulic oil. A pressure gauge reading between the diaphragms monitors the diaphragm conditions, no pressure indicates the diaphragms are okay while pressure indicates that the pump is operated on one diaphragm."Sandwich" diaphragms have very long live years even in continuous operation.

Liquid Ends:

Liquid ends can be offered in S.S 304, S.S.316, Hastelloy B or C, Alloy 20, P.P, P.V.C, PTFE, Cast Nylon, Teflon and etc.Capacity Max - 15000 LPH.Pressure Max - 15 bar.