Write a Review
Our Product / Services
Beams And Girders
2 Products availableLeading Manufacturer, Supplier & Retailer of Precoated Colored Sheet, Precoated Colored Coils Ps - 01, Designer Sheets, Shipbuilding Plates, Non Ferrous Bars and Integrated Facilities & Manpower.
| Sizes Available : | |
|---|---|
| Width | From 1000mm up to 1500mm |
| Length | 1000mm up to 6000mm |
| Thickness | 0.5mm up to 20mm |
| Material | Diameter | Length | Specification | Make |
|---|---|---|---|---|
| Mild Steel | 1 mm To 500mm | 50 mm Long To 6000 mm Long | IS BS DIN | Super Forging, Imported etc. |
| EN-Series | 1 mm To 300mm | 50 mm Long To 6000 mm Long | IS BS DIN | Super Forging, Imported etc. |
| Carbon Steel | 1 mm To 300mm | 50 mm Long To 6000 mm Long | A-105 & LF 2 | Musco, Mukund, Imported etc. |
Grade :
EN-8, 9, 19, 21, A-105, Gr. 1008, 1010, 1015, 1020, CK35, CK45, CK55, CK60 Etc.
Finishing :
Bright, Polish & Black.
In Form :
Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, TMT, Forging, Casting Etc.
Length :
Standard & Cut length .
Hardness for Wire :
Soft, Hard, Half Hard Etc.
Value Added Service :
| ||||
Mechanical Properties (Annealed Condition) CRSS
| Grade | UTS M/mm2 Min | 0.2% Proof Stress M/mm2 Min | % Elongation on 50 mm GL Min | Hardness RB Max |
|---|---|---|---|---|
| 301 | 515 | 205 | 40 | 95 |
| 304 | 515 | 205 | 40 | 92 |
| 304L | 485 | 170 | 40 | 92 |
| 305 | 480 | 175 | 40 | 90 |
| 310S | 515 | 205 | 40 | 95 |
| 316 | 515 | 205 | 40 | 95 |
| 316L | 485 | 170 | 40 | 95 |
| 321 | 515 | 205 | 40 | 95 |
| 409 | 380 | 205 | 20 | 88 |
| 409M | 450 | 275 | 20 | 90 |
| 410 | 415 | 205 | 22 | 89 |
| 420 | 690 | 15 | 96 | |
| 430 | 450 | 205 | 22 | 89 |
Characteristics And Applications
| Grade | Characteristics | Applications |
|---|---|---|
| 316 | With the addition of Mo, 316 Steel has superior corrosion resistance, pitting corrosion resistance and high temperature strength. As a result, it is used in servere conditions. Its strain hardening is superior and it is non-magnetic. | Material for use in sea-water, equipment for mqnufacturing chemicals, paper, dye, acetic acid and fertilizer, In the photo industry, in the f009 industry, the facilities constructed In the coastal area, rope, CD bar, bolts, nuts. |
| 316L | A low carboH.316 steel type. Has all th.e propertiesof316 steel and has superior Intergranulqr corrosion resistance. | Products made with 316 steel that require superior Intergranular corrosion resistance, mesh. |
| 321 | With the addition of Ti, it has good weldabilty and drawability. | Airplane exhaust pipe, boiler cover, bellows and hoses. |
| 409L | 321 Steel was created by adding Ti to 304 steel, thereby preventing intergranular corrosion. .5uitqble to use under temperature of 430°C~900°C | For use where post-heat treatment is not conducted such as automobile exhaust pipe, heat exchanger, container etc. |
| 410 | Steel type that represents martenistic steel. It has high stregth but is not suitable for severe Corrosiono coonditions. It has superior drawability and becomes hard with heat treatment and is magnestic. | General knife blade, machine parts, petroleum refining apparatus, bolts, nits, pump shaft, spoon, fork etc. |
| 420 | This ferritic steel contains min. 0.3% Carbon and around 12% Cr. Can be heat treated to develop high hardness | Knife blade, nozzle, valve, stick ruler, scissors. |
| 430 | Steel type that represents ferritic streel. It has a low thermal expansion rate and superior drawing and oxidation resistance. | Heat resistant tools, burner, houosehold electric appliance parts, hollow ware, sink cover, building material, bolts, nuts, CD bar, mesh. |
| 301 | Has lower Cr, Ni content than 304 steel. It's tensile strength increases with cold drawing. Though its non-magnetic, it acquires magnetism after cold-drawing. | Trains, Aircrafts, belt conveyors, vehicles, bolts, spring |
| 303 | With the addition of 5, 303 steel has good free cutting property and superior anti-quenchability. | Shaft for electrical appliances, OA products, bolts and nuts |
| 304 | Most widely used steel type. It has good corrosion resistance, thermal resistance, low-temperature strength and mechanical properties. It has good drawability at normal temperature such as deep drawing, bending etc. and does not harden with heat treatment. (non-magnetic, usable temperature range: 196° - 800°C) | Hollow and flat ware, sink, interior piping, hot-water machine, bathtub, boiler, automobile parts (wiper, muffler, moulding) medical instruments, building materials, facilities in the chemical and food industry, the textile Industry, In the dairy industry, an vessel parts |
| 304L | 304L steel is low carbon 304 steel type which has similar corrosion resistance with 304 steel in normal conditions. However, its resistance to intergranular corrosion after welding and stress elimination is superior. It possesses corrosion resistance properties without undergoing heat treatment. | Machinery and tools used in the chemical, coal, and petroleum industry that require high intergranular corrosion resistance, building material, heat resistant parts and parts that are difficult to implement heat treatment on |
| 305 | Has high Ni content. It is non-magnetic and suitable for deep drawing use due to its good cold formability. | Dinnerware, electric parts, TV parts, Pen parts |
| 3105 | This is an austentlc stainless steel with a a higher cr and NI content. These grades find application where higher temperature and severe service conditions exist. | Used for air heaters, annealing boxes, ovens, carburislng boxes, furnace lining |
| Material | Size | Sch. | Specification |
|---|---|---|---|
| Cupro Nickel Hastelloy Nickel Monel Inconel Alloy 20 Duplex | 15 NB to 150 NB | Sch. 10 Sch. 40 Sch. 80 Etc. | IS, BS,,ASTM, UNS |
Grades :
304, 304L, 304H, 316, 316L, 316H, 316U, 317, 321, 347, 310, 310s, 904L.
Standards :
Supplied in India , British, American, German and Japanese standard.
Grades :
| |||
| Material | Size | Thickness | Specification |
|---|---|---|---|
| Cupro Nickel Hastelloy Nickel Monel Inconel Titanium Alloy 20 S. S. 904L | 1000 mm x 2000 mm 1220 mm x 2440 mm (4' x 8') 1250 mm x 2500 mm 1500 mm x 3000 mm As per Requirement | 0.1 mm to 20 mm Thk. | IS BS ASTM UNS |
| Duplex | |||
Grades :
Cupro Nickel (90/10, 70/30), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (K400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Titanium, Tungston, Moly, Kanthal, Nimonic Nichrome, Cobalt, Sanicro (28, SS 904L), etc.
Sheet Finishing :
2B, 2D, HR, CR, BA (No. 8), No. 4, Satin (Met with PVC Coated)
Sheets & Plates In Form Of :
Coils, foils, shim sheet, perforated sheet, strip, flats, blank (circle), ring (flange), etc.
Value Added Service :
| |||
| Material | Diameter | Length | Specification | Make |
|---|---|---|---|---|
| Forged Bars | 0.5 mm to 500 mm | 50 mm to 6000 mm long | A-479 | Mukund, Shah Alloys, Faker, Panchmahals, Chandan, Viraj, Bhansali & Imported |
Grades :
| ||||
| Material | Size | Length | Specification | Manufacturer |
|---|---|---|---|---|
| Stainless Steel | M02 to M50 | 3 mm to 500 mm | IS BS ASTM | GKW, Unbrako, EBY Fastener, Kundan, APL, Sundaram Precision etc. |
| Nickel Alloy | M02 to M30 | 3 mm to 300 mm | ||
| Non-Ferrous | M02 to M30 | 3 mm to 300 mm | ||
| High Tensile | M02 to M30 | 3 mm to 300 mm | ||
| Stainless Steel : AISI-304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, 202 Etc. Form : Bolts Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-bolts, J-bolts, Mushroom Head Square Neck Bolts, T- head Bolts, Wing Screw, Eye Bolt, Eye Bolt, Foundation Bolts, Structural Bolts. Washer Plain Washer, Plain Big & Small od Washer, Spring Lock Washer, Spring Washer Heavy Duty, Tooth Washer, Star Washer, Tab Washer with one & two Tab . Nuts Hexagon Nuts, Hexagon Coupling Nuts, Hexagon Thin Nut, Square Nut, Hexagon Castle Nuts, Self Locking Nut, Hexagon Domed Cap Nuts. Screw Pan Head Slotted Screws, Cheese Head Slotted Screws, Countersunk Head Slotted Screws, Countersunk Raised Head Slotted Screws, Pan Phillipse Head Screw, Countersunk Phillipse Raised Head Screws, Slotted Cheese Trim Head Machine Screws, Socket Head Allen Cap Screws, Allen Countersunk Socket Head Cap Screws, Socket Head Shoulder Screws, Socket Head Cap Screw Low Head, Hexagon Socket Set Screw with Flat Point, Hexagon Socket Set Scews With Cone Point, Hexagon Socket Set Screw With Dog Point, Hexagon Socket Set Screws With Dog Point, Hexagon Socket Set Screws with Cup Point, Imprial Socket Cap Screws . Other Threaded Rod, as per Drawing and Customers spec. AS PER THE NATIONAL & INTERNATIONAL STANDARD & SPECIFICATIONS | ||||
| Material | Diameter | Length | Specification | Make |
|---|---|---|---|---|
| Cupro Nickel Hastelloy Nickel Monel Inconel Alloy 20 S.S. 904L Duplexl | 0.1 mm to 100 mm | 100 mm to 3000 mm Long & Abov | ASTM BS DIN | Imported |
Nickel Alloy In Grade :
| ||||
| Material | Size | Swg. | Specification |
|---|---|---|---|
| Copper Brass Aluminium, Phosphorus, Bronze, Gun Metal Lead Zinc Duplex & Special Alloy | 2 mm OD to 152 mm OD | 24 Swg. /16 Swg. 22 Swg. /14 Swg. 20 Swg. /12 Swg. 18 Swg. /10 Swg. | IS BS ASTM |
Grades :
Copper : Dow & PVC coated
Brass : 63/37, 70/30, Admiralty Brass, Aluminum Brass
Zinc & Lead : (99.95 to 99.99)
In Form :
Round, straight, shaft, coil, U shape, bush, etc.
Length :
Standard & cut length
Value Added Service :
| |||
The Standard Composition Is As Below For AH36, DH36 And EH36 :
| Element | Composition (%) |
|---|---|
| C | 0.18 |
| Mn | 0.90 - 1.60 |
| Si | 0.1 - 0.5 |
| P | 0.035 |
| S | 0.035 |
| Al | 0.015 |
| Nb | 0.02 - 0.05 |
| V | 0.05 - 0.1 |
| Ti | 0.02 |
| Cu | 0.35 |
| Cr | 0.2 |
| Ni | 0.4 |
| Mo | 0.08 |
| Maximum carbon equivalent values are 0.38 for plates less than 50mm thick and 0.4 for plates between 50mm and 100mm thick. | |
Specifications
| Type | AH36 | DH36 | EH36 |
|---|---|---|---|
| Tensile Strength (ksi | 71 - 90 | 71 - 90 | 71 - 90 |
| Tensile Strength (MPa) | 490 - 620 | 490 - 620 | 490 - 620 |
| Yield Point (ksi) | 51 | 51 | 51 |
| Yield Point (MPa) | 355 | 355 | 355 |
| Elongation in 200mm (%) | 19 | 19 | 19 |
| Elongation in 50mm (%) | 22 | 22 | 22 |
| Charpy V-Notch Test Temperature | 0oC | -20oC | -40oC |
AH36
| |||
| Material | Size | Sch. & Swg. | Specification | Manufacturer |
|---|---|---|---|---|
| Cupro Nickel Hastelloy Nickel Monel Inconel Titanium Alloy 20 S.S. 904L Duplex | 6.35 mm OD To 152 mm OD | 20 Swg. 18 Swg. 16 Swg. 14 Swg. 12 Swg. 10 Swg. | IS BS ASTM UNS | Imported & Indian Mfg |
Specialize :
| ||||
| Material | Size | Thickness | Specification |
|---|---|---|---|
| Copper Brass Aluminium Phosphorus Bronze Gun Metal Lead Zinc Duplex & Special Alloy | 12 x 48 14 x 48 16 x 48 24 x 48 2 x 2 2 x 4 4 x 8 4 x 4 | 0.1 mm to 65 mm Thk. & 47 Swg. to 10 Swg | IS BS ASTM |
| Copper Brass Phosphorus Bronze Lead | In Grade | 99.99% (Rolled Hot & Cold, Electrolytic & Commercial) Naval Brass, Rolled-Hot & Cold-60/40, 63/37, 70/30 Etc. PB2, 90/10 Etc. 99.95 to 99.99% | |
Grades :
Bi-Metals, White Metal, Antimony, Tin, Zinc Anodes, etc.
Sheets & Plates In Form Of :
Coils, foils, rolls, plain, flats, strip, blank (circle), ring (flange) & perforated sheet, shim sheet, etc.
Value Added Service :
| |||
We consider quality as a next cornerstone of our success. Being a quality driven firm, we follow strict quality standards at each stage of packaging and transportation process. We also make sure that all merchandise is properly labeled and conforms to the quality standards specified by the client. We are one of the few exceptions in this industry to provide Materials Test Certificate along with our wide product range. Our team of experts maintain a strict vigil on the quality of the products and every single piece is attached with test certificates and reports Quality Objectives : The quality assurance department oversees all important quality functions and performs the following activities :
Different kinds of test that are performed are :Tensile Testing : The tensile testing evaluates the overall strength of our products to ensure they are fit to be delivered to our customers and conform to international quality standards. Flattening Test : The flattening test are carried out to check the flattening properties of our products and ensure the robustness of our products. Bend Test : The agility of our products is tested with the bend test to ensure that they are of the best quality and standards. Drift Expansion Test : These tests are performed to calculate the drift expansion of the products to make sure that the products are durable and can withstand heavy weights and pressure. Crushing Test : In accordance with API 5LCP, ASTM A450 and PTTI engineering specification ES-Q-8 four-inch long specimens are flattened with the weld positioned 90 degrees from the applied force. These crushing tests are performed until the opposing sides of the tube meet in order to evaluate base metal and weld metal ductility. Quality ResourcesTo ensure the quality assurance system's continued suitability and effectiveness, we maintain adequate resources by way of trained personnel, equipment, materials, finance and time to ensure that the products are provided in accordance with our quality policy and objectives. This provision of resources includes those required for the management of quality, performance of activities relating to identification of requirements, inspection & tests, training, servicing, internal external audits and review of adequacy of quality assurance system. International Quality Standards :Our products are manufactured in complete compliance with leading regulatory standards in the domestic and international segments such as the IS, ASTMANSI, BS, JIS, and DIN standards. These certifications are a reflection of our commitment to providing quality products to our customers around the world.
S. R. Metals offers its products to client with third party inspection also. The inspection Agency can be nominated by clients also or S. R. Metals arrange the Third Party Inspection by world reputed Third Party Inspection Agencies like Bureau Veritas, Lloyds Register, SGS, IRS, and many others.
Third Party Inspection Agencies Services Under Our Scope
| Tecnimont ICB Limited | ICB |
|---|---|
| DET Norske Veritas | DNV |
| Fact Engineering And Design Organisation | FEDO |
| Projects & Developments India Limited | PDIL |
| Baxcounsel Inspection Bureau Pvt. Ltd. | Baxcounsel |
| Bureau Veritas Industrial Services (India) Pvt. Ltd. | BVIS |
| Industrial Consultancy And Inspection Services | ICIS |
| Metallurgical & Engineering Consultants (India) Ltd. | MECON |
| Nuclear Power Corporation Of India Ltd. | NPCL |
| Engineers India Limited | EIL |
| Bharat Heavy Electricals Limited | BHEL |
| UHDE India Limited | UHDE |
| Pipecon Consultants (India) Pvt. Ltd. | PIPECON |
| Indian Boiler Regulations | IBR |
Mahaveer Jain (S. R. Metals)
6/a Ground Floor, 28/30 Dr. Wilson Street, V. P. Road, Girgaon, Mumbai, Maharashtra - 400004, India
Share us via
