Sri Sai Beltings

Attapur, Hyderabad, Telangana

The company has acquired a prominent status among the Manufacturers and Suppliers of Rubber Belt Conveyor Systems in Hyderabad. The nylon fabricated Rubber Belt Conveyor System, offered by the company, is specially designed and is manufactured using the best techniques. The Rubber Belt Conveyor Systems provide high speed and better performance and have a long life. The Rubber Belt Conveyor Systems are highly beneficial in terms of cost per tonnage of material they convey.

Features Of Rubber Belt Conveyor Systems

• Higher tensile strength due to nylon fabrication instead of cotton
• Higher adhesion due to the chemical bonding between cover to ply and ply to ply
• Complete rot resistance with no problem of fabric deterioration where wet material is used
• Reduced belt weight and ability to handle materials as they are lighter than the equivalent all-cotton belts due to reduced piles

 

Specifications Of Rubber Used

• Thickness at the bottom 3.05/ 5.0 mm
• Thickness at the top at 1.5/ 2.0 mm
• Heat resistant cover grade used is 4/2
• H-Tex cover grades used is 5/3
• Reversed stepped plies equal to 6/4

 

Construction Of Rubber Belt Conveyor Systems

• Straight ply construction extending across the width of the belt
• Stepped ply construction and cushioning with extra rubber cover to fill missing gaps in first and second plies and improve transverse flexibility
• Reverse stepped ply construction where missing gaps in first and second plies are filled with rubber to improve flexibility
• Designed with waterlogged ash handling installation in boiler plants that operate under water
• Breakers ply construction to protect against longitudinal impact of breaks
• Leno weave breaker cords lay diagonally across the belt and breaker fabrics are also used in pairs where they are laid on opposing 450 angles for extra severe impact protection. Proceed breakers which are used for adding 1 mm thickness to the belt
• Skim-coated plies for improving additional interaction
• Extra thickness provided by inserting heat impact cushion
• Scan quote service offered in case of cuts in rubber
• Edge construction in cut and molded edge with rot resistant properties to guard against edge wearing
• Sharply molded to avoid the entrance of moisture in the corner of the belt and adding of 1200 mm rubber cover for protection
• Manufactured using finest quality input carcass or Nylon/Nylon (NN) Carcass
• Salient features of carcass include lower longitudinal elongation, higher tensile strength, good flexibility and trough ability, good resistance to edge wears and good resistance to milde

We provide Idler Rollers & systems with dust collection systems that offers useful versatility where both grinding and buffing are done. Motors are totally enclosed, non-ventilated, rated for continuous grinding service. All are equipped with ball bearings, grease lubricated and sealed; designed for long life. Starting equipment is indicated in the chart below. For added safety, the use of an eye shield and a dust collector is suggested. A shaft holding device is provided as standard to simplify wheel changing. carrying idler :- carrying idler are used to support the conveyor belt and are installed on the groove-shape frame, groove-shape forward inclined idler frames and transition idler frame. Impact idler :- installed on the material-feeding spot to reduce the impulsive force occurred by the falling down material and protect the belt and idlers from damaged.

 

Following Features:

• Low Weight
• Corrosion Resistant
• Low Rotational Inertia
• High Specific Stiffness
• Higher Critical Speed
• Thermal Stability

 

Details

• Two Roll type Troughing idlers & brackets are used to conrey bulk material & teh same are available with 20* and 30* Inchined Idlers.
• For Conveying large quantity of bulk material Three roll type bracket with 20*, 30* and 45* Inclined Idles are available.
• Troughing angle impect Idlers generally used for absorbing impect at loading point & protect belt, Idlers are available in Two roll type & Three roll type bracket & having troughing angle 20*, 30* & 45*.
• Due to eccentric, loading, soiling slipage of the material to the drum pulleys and Idlers roller may cause the belt to run crooked to prevent the belt from running to the rollers self aligning Idlers of various angles & design are available.
• For horizontal flat belt conveyor pogitive action type belt training Ilders are available in any size.
• Rubber ring return Idlers are generally used when handling material is wet & silky or corrosion resistence is required.
• Conveyer Pulley Customised with lagging.

We offer Pulleys, belt conveyor pulleys, which are engineered as per the application and performance required. Our pulleys are fabricated to various sizes with either bare face, crown face & rubber lagged with herringbone grooves. We use special vulcanizing process, which ensure its smooth surface and full surface bond. The shell is made of single rolled plate rim with welded end discs. The pulleys are statically balanced.

We have acquired prominence as a Manufacturer and Supplier of Belt Conveyor Pulleys in Hyderabad. The Belt Conveyor Pulleys, offered by us, are constructed in an application-specific way. The Belt Conveyor Pulleys are available in sizes and types and we use the special vulcanizing process in the manufacturing. The vulcanization of the Belt Conveyor Pulleys ensures smooth surface and a full surface bond. The shell of the Belt Conveyor Pulleys is made of a single-rolled plate rim and the end discs are welded as well. The Belt Conveyor Pulleys, offered by us, are statically balanced and quality assured products.

Types Of Belt Conveyor Pulleys

• Bare face
• Crown face
• Rubber lagged with herringbone grooves

The company is one of the major Manufacturers and Suppliers of Chain Conveyor Systems in Hyderabad. The Chain Conveyor Systems, offered by the company, is manufactured using the best quality raw materials with the help of the latest techniques. The Chain Conveyor Systems use various types of interleaving segments and these segments form a chain of that consists of either synthetic polymer or steel. The Chain Conveyor Systems allow the transportation of goods without any friction and known for offering high impact resistance.

Applications Of Chain Conveyor Systems

• Used in high wear areas
• Used in processes that deal with handling of individual packet
• Used in can filling
• Used in bottling operations
• Mostly used in food and pharmaceutical industries
• Can be washed down for hygiene reasons

The company has emerged as one of the most sought-after Manufacturers and Suppliers of Conveyor Idlers in Hyderabad. The Conveyor Idlers are available with dust collection systems with both the operations of grinding and buffing being carried out. The Conveyor Idlers are known for their optimum quality as well as high performance levels. The company offers the best Conveyor Idlers at the market leading prices.

Types Of Conveyor Idlers

• Carrying Idler : Used to support conveyor belts and installed on the groove-shape frame, groove-shape forward inclined idler frames and transition idler frame
• Impact Idler : Installed on material-feeding spot for reduction of impulsive forces caused by the material falling downwards and meant for the protection the belt and idlers from damage   

 

Features Of Conveyor Idlers

• Totally enclosed and non-ventilated motors with rating for continuous grinding service
• Equipped with ball bearings, grease lubricated and sealed
• Designed for long life
• Starting equipment indicated in the chart below
• Use of eye shield and dust collector suggested for safety
• Shaft holding device provided as standard to simplify wheel changing

The company is a highly acclaimed and a much sought-after Manufacturer and Supplier of Screw Conveyor Systems in Hyderabad. The Screw Conveyor Systems, offered by the company, are made using the best quality raw materials with the help of the latest manufacturing techniques. The Screw Conveyor Systems are widely demanded in the market owing to their unmatched quality and excellent performance.

Details For Screw Conveyor Systems

• Permit intermediate discharge of materials at several points
• Simple in design
• Easy to maintain
• Small width
• Facilitates transport of cereal grains or hot liquids
• Trough made by jacketing with a high quality of metal
• Dust-proof trough
• Used in industrial control application
• Used as rotator/variable rate feeder to deliver measured material quantity

The packaging procedure is supervised by our experts holding immense domain experience. Moreover, we make use of only quality packing material for ensuring complete safety of the orders during transit. Our company has all the necessary logistic resources and connection to make on time delivery of order(s).

Tailor Made Mounted For Vibrating Roller Machines:We are specialised in making Tailor made mounting and othe Rubber Parts at a very competitive prices even in smaller quantities perfectly meeting either in specification or as per drawing of customers. Most versatile for mobile application. Excellent vertical shock resistance capabilities to suit a load ranging from 1000Kgs. to 5000Kgs.per Mounting.

GR Bond Rubber Track Pads:GR Bond Rubber Track Pads arefor Sensor Paver Machine and excavator. The Medium Grade Polyurethane and high quality Rubber to provide a durable and long life Track Pad in conventional and interchangeble short pitch types. These pads are designed for low ground pressure application in constructional and agricultural equipment. It increases traction and protection for delicate surfaces that would be damaged to exposed steel tracks. These Track Pads offers longer operaational life and are least expensive. GR BOND Rubber Track Pads available in variety of shape and wide range of sizes to fit many types of constructional machineries.

Engine Mounting:Engine Mountings are designed with metal incarporated in mounting itself to take care of compression , shear and torque loads depending upon the applied load.

Rectangular Sandwitch Mounting:Rectangular Sandwitch Mountings are manufactured in two sizes for minimizing the vibration. They are very much suitable for direct compression or at a various inclination to suit individual requirements such asa sound chambers, hoppers, heavy installation carriage construction and suspending the small automobile engine etc. They are available in two types:

GR Bond Machine Mountings (Round Mountings):GR Bond Machine Mountings are ready to use for workshop machineries. It eliminates the foundation, foundation bolts, and grouting in the ground. These are ready to install mountings which allows fast commissioning of machineries. For precise levelling, it has a special features for height adjustment. These mountings provides excellent interchangeablity of layout of machineries in workshop. These mountings provideshigh insulating for Vibration Frequency and Noise because of their large area of contacts.

GR Bond 'O' Mounting/ Instra Mounting/ Roller Mounting:These mountings are manufactured in various types for small to medium size units in Engineering applications. These are manufactured according to the requirement of customers. These mountings are available for 50Kgs. to 1000Kgs. Load per Mounting. The deflection is minimum.

GR Bond Cusyfoot Mountings:Cushyfoot mounting are manufactured in three standard size as listed below. Cushtfoot Mountings are suitable for Diesel Generator sets, Blowers, Compressors, Machine Pumps, Engine Test Beds, Food Processing machineries, Mobile generator sets, Printing Machines, Precision Grinders, Polishers, Electric hammers etc.
Cushyfoot mountings give insulation against transverse and vertical vibration and reduces transmission noise. It gives instultion against out of balance forces and reduce the transmission of vibration.

Double 'U' Shear Mounting:Double 'U' Shear mountings are manufactured in four different sizes. These mountings are capable of damping shocks & vibration in vertical as well as in lateral direction. The design incorporates built-in protection against metal to metal bottoming.
These mounting can be used for instruments, electronics apparatus, protecting equipment in packing cases, susupending light components/ recorders in a vibrating equipment, electrical control panels, suspending ducts, pipelines & high speed motors for hydraulic power pack etc. Double 'U' Shear Mounting can be prepared as pre-compressed and used as buffers.

Conveyor Belts (Special Purpose) :We are manufacturing special purpose Conveyor Belts from Rubber, PVC, PU, Teflon, Nylone, Polyster, with steel cord reinforcement.

Over the years, our company has a cemented its position in Hyderabad(India) and is determined to become a trusted provider in other markets as well. With due assistance and knowledge of diligent professionals, we are capable of making available belt conveyors pulleys in the nationwide market.

Hailing from Hyderabad(India), the company is known for providing only quality products at reasonable prices. Noteworthy Supplier of vibro avm pads, we are customers' favored option in this domain.

The company is a well-known Manufacturer and Supplier of Belt Conveyor Rollers in Hyderabad. The Belt Conveyor Rollers, offered by the company, are available in various sizes and can be availed in the standard as well as customized forms. The Belt Conveyor Rollers are provided with superior protective finishing and are widely used across various industrial sectors.

Highlights Of Belt Conveyor Rollers

• Thermal stability
• Low rotational inertia
• Light weight and corrosion resistant
• High specific stiffness and critical speed

The company stands tall as a Manufacturer and Supplier of Scraper Conveyor Systems in Hyderabad. The wet Scraper Conveyor Systems, offered by the company, are widely used for one or more sliding chains in a trough that contains the material. The Scraper Conveyor Systems are highly suitable for conveying of the free-flowing, granular and lumpy materials. Apart from these materials, the Scraper Conveyor Systems can effectively handle the materials that are wet and moderate sticky as well. The Scraper Conveyor Systems are low profile and provide a small area for the material to cling to.

Highlights Of Scraper Conveyor Systems

• Low maintenance requirements
• Can be mounted as single or interlinked conveyor
• High wear resistance due to sandwich bottom
• High stability due to special design of the conveying tub

 

Commonly Conveyed Materials

• Bagasse
• Calcined coke
• Clay dirt
• Coal
• Fly ash
• Slag