Shakti Plastic Eng Works

Rajkot, Gujarat

Annex. A Specification for Suction Hose Plant ( Model SXF- 65X50 ) for mfg. hose size: 1 to 4 in. 1. One 65mm Extruder for Soft PVC Extrusion : Single screw extruder having helical speed reduction Gear, 11.25kW(15HP) AC electric motor, AC frequency variable drive & 3 heating zones for barrel heating. Motor make Crompton, Simens, Ngef, Hindustan 2. One 50mm Extruder for Rigid PVC Extrusion : Single screw extruder having helical speed reduction gear, 7.5kW(10HP) AC electric motor, AC frequency variable drive & 3 heating zones for Barrel heating. Specification for above Soft PVC & Rigid PVC extruders : -- a) Screw & Barrel : Made out from EN � 41B Nitride Steel and dully Nitrided. b) Barrel Heating & Cooling : 3 Barrel Heating Zones with 2 Zones having Air Blowers. c) Barrel Feed Zone Cooling : Water cooling jacket near feed zone with water inlet & outlet. 3. Control Panel : Common Heating Control Panel for Soft & Rigid Extruder having :-- a) 3 Temp. Controllers with Heater & Blower O / P for Soft Extruder. b) 3 Temp. Controllers with Heater & Blower O / P for Rigid Extruder. c) 2 Temp. Controllers with only Heater O / P for Die & Adapter. d) 8 Ampere Meter & Heater On / Off Switch for each Heating Zones. Total heating load for both extruders : 15 kW approx. 4. Die Adapter : One cross Die�Adapter suitable for size ¾� to 6� & 2 Electric Bend Heaters. 5. Profile Die & Nipple : One set for sizes range 3/4� to 6� 6. Former Stand : One Former Stand Suitable for Hose Size up to 4� with 1.5 kW. ( 2 H.P. ) AC Electric Motor and AC Frequency Variable Drive. 7. Formers ( 7 Nos. ) : One each size : 1��, 1 ½� 2� 21/2� 3� 4� � � Max. Output Capacity : 110 KgperHour.Depand upon Size 8. Water Cooling Trough : Chilled Water Cooling Trough of total length 107-1/4 feet fabricated from Galvanise Sheet by joining 13 Trough each of 8-1/4� feet long with height adjustable stand. Total Connected Electric Load : 37 kW. ( 50 H.P ) approx. Floor Space Recommended : 25� width X 135� length X 15� height.

1. One 65mm Extruder for Soft PVC Compounding : 65mm single screw extruder having worm speed reduction gear, 11.25 kW. (15HP) AC electric motor, fixed pulley drive & 3 heating zones for barrel heating. Specification for above extruder : -- a) Screw & Barrel : Made out from EN – 41B Nitride Steel and dully Nitrided. b) Barrel Heating & Cooling : 3 Barrel Heating Zones with 2 Zones having Air Blowers. c) Barrel Feed Zone Cooling : Water cooling jacket near feed zone with water inlet & outlet. 2. Control Panel : Heating Control Panel for above extruder having :-- a) 3 Temp. Controllers with Heater & Blower O / P for 65mm Extruder. b) 1 Temp. Controllers with only Heater O / P for Die & Adapter. c) 4 Ampere Meter & Heater On / Off Switch for each Heating Zones. Total heating load : 7.5 kW ( 10 HP approx ). 3. Die Adapter, Die : One Die Adapter, One Die for Strand and & Die Heating One Electric Bend Heaters for Die heating 4. Palletizing Unit : One Strand Palletizing Unit with 2 HP AC Electric Motor. Max. Output Capacity : 90 Kg pellets per Hour. 5. Water Cooling Trough : Water Cooling Trough having length 6 feet, fabricated from Galvanize Sheet. Total Electric Load : 20 kW. ( 27 HP ) approx. Floor Space Recommended : 10’ Width x 30’ Length x 15’ Height.

We offer pvc blanding machine and compounds. Mixer vessel : mixer vessel fabricated from thick stainless steel sheet, water cooling jacketed with water inlet and outlet for additional cooling. A cast aluminium vessel-lid with leak-proof sealing rubber is hinged with the vessel having a locking device on opposite side, feed port, deflectior mount & lighting bulb with on/off switch. The discharge made of cast aluminium, equiped with valve type locking arrangement. mixing tools : the mixing tools consist of bottom scraper & vertical adjustable fluidising rotor made out from stainless steel. drive : driven by “v” belts & flange mounted 12/15 kw dual speed 3ph. ac electric motor having 1500/3000 r.p.m. mixing tools speed : 600 / 1200 r.p.m. electric control panel : separate control panel of automatic starter for the dual speed electric motor and one temperature indicator ( 30 to 150 degree co ) & one ammeter indicating motor current. container capacity : 130 litres. working capacity : 85 litres. max. Output capacity : 200 kgs. Per hour approx. Depending on material being used & strictly on operating conditions. 4 to 5 per our batch of 25 kg. resin & additives. Total load of 42 / 45 kg. Approx. connected electric load : 15 kw. ( 20 hp. ) floor space required : 5’ width x 5’ length x 10’ height.