We are a trusted Manufacturer, Supplier and Exporter of Heat Reactivated Air Dryer. We offer easy to install Automatic Heat Reactivated Air Dryers with air capacity of 50 to 3000 NM3/ Hr. Heat Reactivated Air Dryers offered by us are widely appreciated for their flawless performance and longer service life. Construction and Working :Heat Reactivated Type Air Dryers are utilized when necessities packed quality of extremely low Dew purpose of (-) 60c or (-) 80c. In this outline, the desiccant is recovered at higher temperature, as well as modest amount of Dry Air cleanse. Because of cleansing with Dry Air and warm recovery, leftover dampness stacking on desiccant comes to be low and this gives exceptionally low Dew focus. The Drying unit has 2-vessels loaded with activated alumina or molecular strainers desiccant. One vessel stays in drying cycle for 4 hours, while other vessel is concurrently recovered at air force. Around 3% stream of dryer limit is utilized as cleanse for recovery.Electrical warmers are furnished in a focal finned Stainless steel pipe in both drying vessels. Warming cycle is for 2 hours and in this time hot cleanses air increments desiccant temperature to around 100C. At this temperature recovery is finish (because of dry air cleanse). Dew focus accomplished is around (-) 40C. Assuming that still easier Dew focus is needed, air cleansing rate is somewhat expanded to 5% for (-) 60C and to 7.5% for (-) 80C Dew point. Features :

• Requires less attention of operator
• Longer life of operation
• Heaters and valves are operated automatically
• Once installed can be operated automatically
• Easy maintenance

Refrigerated Air Dryer is used to remove the dampness of air by cooling it to certain temperature. We offer different varieties of Refrigerated Air Dryers in various compact designs. We are a trusted Manufacturer, Supplier and Exporter of Refrigerated Air Dryers. These Refrigerated Air Dryers offered by us are acknowledged for their energy efficiency and performance. Working :The notion of productive cooling is evacuation of high temperature only. The air first enters into the pre-cooler where the approaching hot air is almost always cooled by friendly frosty air in order to diminish the hotness load of evaporator. The air from pre-cooler enters into the evaporator where further high temperature is evacuated by bubbling refrigerant like Freon.Right away the air gets condensate and this moist air is passed through a dampness separator where dampness is emptied out by outward activity of air. The soggy free air enters into pre-cooler to cool the approaching air. Features :

• Least pressure drop.
• Simple and compact design
• Efficient Power Saving
• Easy maintenance.

We are engage in offering Fully Automatic Compression Heat Air Dryer across the world. We manufacture, supply and export high quality Compression Heat Air Dryers that are appreciated for their flawless performance and low maintenance. Our Compression Heat Air Dryers can produce 100 Nm3/Hr. to 4000 Nm3/Hr. Compressed Air. Working :Compressed air, straightforwardly from Air compressor release is taken to Air Dryer inlet through separated pipelines, at 120C (minimum) temperature. This hot air is passed through one drying vessel where soaked desiccant is recovered by this hot air. In the wake of getting dampness from desiccant mattress, the Air is cooled in a middle of the road cooler. Here dampness is dense and evacuated via auto channel valve. Cooled to 40C, this air passes as the second progressed drying vessel where dampness gets adsorbed and dry air turns out. Process duration is 4 hours recovery and 4 hours drying. 4 hours later the changeover of vessels happens immediately. In recovery cycle warming of the mattress is for 2 hours, and from that point the cot is cooled by dry air. After cot cooling, dry Air is again cooled to 40C in an alternate cooler and conveyed as Dry air at 40 °C Temperature. Features :

• No power requirement for regeneration
• No loss of compressed air
• Maintenance is easy.
• Low-pressure drop across the Dryer
• Skid mounted
• Fully automatic
• Continuous operation

Heatless Compressed Air Dryer is a simplest form of Air Dryers, used to produce compressed air with a dew point of (-) 40C. It has large industrial applications. We manufacture, export and supply superior quality Heatless Compressed Air Dryers with low pressure drop. We offer automatic Heatless Compressed Air Dryer with high functionality. Features :

• Fully automatic operation
• Easy maintenance
• Trouble free operation
• Low pressure drop

We are a trusted Manufacturer, Supplier and Exporter of Heat Reactivated Air Dryer. We offer easy to install Automatic Heat Reactivated Air Dryers with air capacity of 50 to 3000 NM3/ Hr. Heat Reactivated Air Dryers offered by us are widely appreciated for their flawless performance and longer service life. Construction and Working :Heat Reactivated Type Air Dryers are utilized when necessities packed quality of extremely low Dew purpose of (-) 60c or (-) 80c. In this outline, the desiccant is recovered at higher temperature, as well as modest amount of Dry Air cleanse. Because of cleansing with Dry Air and warm recovery, leftover dampness stacking on desiccant comes to be low and this gives exceptionally low Dew focus. The Drying unit has 2-vessels loaded with activated alumina or molecular strainers desiccant. One vessel stays in drying cycle for 4 hours, while other vessel is concurrently recovered at air force. Around 3% stream of dryer limit is utilized as cleanse for recovery.Electrical warmers are furnished in a focal finned Stainless steel pipe in both drying vessels. Warming cycle is for 2 hours and in this time hot cleanses air increments desiccant temperature to around 100C. At this temperature recovery is finish (because of dry air cleanse). Dew focus accomplished is around (-) 40C. Assuming that still easier Dew focus is needed, air cleansing rate is somewhat expanded to 5% for (-) 60C and to 7.5% for (-) 80C Dew point. Features :

• Requires less attention of operator
• Longer life of operation
• Heaters and valves are operated automatically
• Once installed can be operated automatically
• Easy maintenance

Refrigerated Air Dryer is used to remove the dampness of air by cooling it to certain temperature. We offer different varieties of Refrigerated Air Dryers in various compact designs. We are a trusted Manufacturer, Supplier and Exporter of Refrigerated Air Dryers. These Refrigerated Air Dryers offered by us are acknowledged for their energy efficiency and performance. Working :The notion of productive cooling is evacuation of high temperature only. The air first enters into the pre-cooler where the approaching hot air is almost always cooled by friendly frosty air in order to diminish the hotness load of evaporator. The air from pre-cooler enters into the evaporator where further high temperature is evacuated by bubbling refrigerant like Freon.Right away the air gets condensate and this moist air is passed through a dampness separator where dampness is emptied out by outward activity of air. The soggy free air enters into pre-cooler to cool the approaching air. Features :

• Least pressure drop.
• Simple and compact design
• Efficient Power Saving
• Easy maintenance.

We are engage in offering Fully Automatic Compression Heat Air Dryer across the world. We manufacture, supply and export high quality Compression Heat Air Dryers that are appreciated for their flawless performance and low maintenance. Our Compression Heat Air Dryers can produce 100 Nm3/Hr. to 4000 Nm3/Hr. Compressed Air. Working :Compressed air, straightforwardly from Air compressor release is taken to Air Dryer inlet through separated pipelines, at 120C (minimum) temperature. This hot air is passed through one drying vessel where soaked desiccant is recovered by this hot air. In the wake of getting dampness from desiccant mattress, the Air is cooled in a middle of the road cooler. Here dampness is dense and evacuated via auto channel valve. Cooled to 40C, this air passes as the second progressed drying vessel where dampness gets adsorbed and dry air turns out. Process duration is 4 hours recovery and 4 hours drying. 4 hours later the changeover of vessels happens immediately. In recovery cycle warming of the mattress is for 2 hours, and from that point the cot is cooled by dry air. After cot cooling, dry Air is again cooled to 40C in an alternate cooler and conveyed as Dry air at 40 °C Temperature. Features :

• No power requirement for regeneration
• No loss of compressed air
• Maintenance is easy.
• Low-pressure drop across the Dryer
• Skid mounted
• Fully automatic
• Continuous operation

Heatless Compressed Air Dryer is a simplest form of Air Dryers, used to produce compressed air with a dew point of (-) 40C. It has large industrial applications. We manufacture, export and supply superior quality Heatless Compressed Air Dryers with low pressure drop. We offer automatic Heatless Compressed Air Dryer with high functionality. Features :

• Fully automatic operation
• Easy maintenance
• Trouble free operation
• Low pressure drop