SPICOS Media Communication

Jogeshwari, Mumbai, Maharashtra

For more than 50 years, Mersen has been providing the market with safe, reliable and long-life fuse boxes. Our fuse box product line, one of the largest product ranges on the market today, is rigorously engineered to meet your technical specifications and can be customized to your needs.

It is a common experience that most-materials stored in bins. hoppers or silos do not easily flow through discharge opening.When called upon to flow. the materials tend to plug. bridge or rat-hole because of their inherent characteristics. environmental conditions or undesirable surrounding vibrations. The conventional solutions employed. viz. electromagnetic vibrators. air/ steam jets. pounding on the bin body or even manual packing of material from top or through discharge opening. are largely inefficient. noisy and lead to intermittant and erratic discharge of materials. The use of above techniques results in.

* Loss of production
* Down-time on part of down-stream requirements
* Worker fatigue due to additional strenuous work and / or unpleasant vibrator noise.
* Contamination, dusting and spillage of product
* Damage to structure due to repeated heavy pounding
* Impaired product quality and down-stream process wherever flow rates and charging time are important.

A specially engineered gyrator with matched characteristics imparts powerful vibrations of low amplitude and high frequency to the discharge head and hence to the material but not the bin. The horizontal vibratory thrust unpacks the contained material and throws it towards discharge opening where it falls down easily by gravity. The discharge head resolves the horizontal thrusts into strong vertical impulses which extend far up into main bin to cause loosening of contained material. The whole phenomena is silent and demands very little power and attention.

Mersen high and medium voltage fuses provide short-circuit protection of transformers, distribution lines, medium voltage motors, motor controllers, and more.

The existing standard "Cable glands for electrical installations" DIN EN 50262 will be replaced with the new standard DIN EN 62444 on 23.09.2016.
Amongst others more restrictive test criteria within the range of resistance to impact, electricity tests, resistance to corrosion and strain relief will be implemeted.
Already today Geissel meets the requirements of the new standard DIN EN 62444 for all significant cable glands out of our wege program.
The relevant declaration of conformity you will find under

Finders new upgraded versions of (12 series) Time switches provides you a step forward for easier, quick & flexible programming right from your smartphone via NFC (Near Field Communication) technology with the help ofFinder toolboxAndroid App available freely on Google Play. Application areas: These switch find its application in a wide segments like Municipal lighting (street, squares, monuments, fountains.), Industrial lighting, gardens, parking, shops, illuminated signs, irrigation systems, heating and cooling plant, access (door) control.

With PASloto, Pilz now offers a software package to document lockout-tagout processes (LoTo). As a result, job specifications for dealing with hazardous energy sources can be produced and documented simply. In the associated training course, Pilz also conveys the necessary knowledge about the LoTo procedure and covers the optimum way to work with the software

Toshiba India has introduced Model Driven PID (MD-PID), a solution to energy and cost saving for long dead time control loops. E.g. in a coal fired boiler, these could be attained by stabilizing and increasing the main steam temperature within the operation range. MD-PID is a software function block (type of Internal Model Control algorithm) developed by Toshiba, which can be used with nvcontroller (DCS) and even with LC53X loop controller. The MD-PID can be optimized for not only set point (SV) change but also the process disturbance (DV).

Bluetooth Low Energy technology enables you to easily configure the new movement detectors parameters with a smartphone with either an Android or an iOS operating system. Once you have installed the18.51.8.230.B300detector, download the free Finder Toolbox App, from the official Google and Apple stores, to configure the device.

Open the application and choose Series 18 from the configuration menu, and then search for Bluetooth LE devices and select the device to be set from the list, considering that the devices are arranged according to distance from the nearest to the furthest

Venture Lightings Wave Aisle Lighter Highbay fixtures are the optimal solution for upgrading existing HID or Fluorescent installations using high racking.

Construction - The high performance LED source is mounted to an aluminum heat sink which is designed to ensure proper thermal management of the system. This design allows for a cooler running LED chip which leads to longer lifetime, better efficacy, and color consistency. Fixtures are rated for an ambient operating temperature range -30C to 50C. Wave Aisle Lighter Highbay luminaires are water and dust resistant, with IP65 rating.Optics : The optics are specially designed to have a 60 x 90 distribution which is ideal for aisle lighting applications.

Electrical : The power supply has a range of 120-277V, 50/60 Hz. 0-10V DC dimming capability is standard. The luminaire is rated for damp and dry locations.

Typical operating limits of size 06, CETOP03 versions. Ambient temperature 70 C (158 F), Voltage Un -10 % (24 VDC), Power Pn 10 W.There are potentially explosive mixtures in the form of gas, vapor, mist or dust in various segments of the chemical and petrochemical industries or for example in mines. It is necessary to ensure a high level of protection against explosion on each part of the equipment used in these industries. When using hydraulic elements, a common method is to prevent the accumulation of energy, which would be sufficient for the ignition of an explosive mixture.

The new WLS15 from Banner Engineering is a professional grade LED strip light that makes it easy and very cost-effective to illuminate equipment and work spaces for improved efficiency, productivity, and safety. It installs in just a few minutes and has a sleek, low-profile design that fits into very tight spaces. Once installed, the WLS15 will provide years of bright, even illumination with no hot spots.

Venture's LED Vapor fixtures are designed for use in harsh environments. Optimal for parking driver lane compliance. For use as utility lighting, parking garage and tunnels, maintenance areas.

Construction : The fixture is a Makrolon all plastic non-corrosive construction with a one piece fixture housing and lens. Chemical resistance information for Makrolon can be downloaded from the user manual tab on our website. The diffuse gasketed polycarbonate lens is secured by non-corrosive plastic clips. These versatile fixtures are IP-65 rated for use in variety of unique applications.Knock-out locations are available on both sides of the fixture as well as on top of the fixture as well.

TDK Corporation presents a new series of robust EPCOS MKP X2 capacitors for EMI suppression. Compared with conventional X2 capacitors designed for rated voltages of 305 V AC, these new components offer a higher rated voltage of 350 V AC. This makes them suitable for EMI suppression in input filters specifically for applications on the North American market and output filters of photovoltaic inverters, for example.

ASCO has introduced the Numatics 502 Series pneumatic directional control valves with high flow rates and the broadest range of components and accessories. The 502 Series joins a family of high-performance sub-base mounted directional control valves (501 Series and 503 Series) that have higher flow rates; less power consumption; and exceptionally easy on-site installation, configuration, and modification.
"The ASCO Numatics 502 Series valves have up to 30% greater flow than the products they replace making them ideal for design engineers desiring a more compact valve, or for those who want to increase a machine's work capacity using the same size valve, " said Andy Duffy, vice president, sales, Americas, ASCO

Finder has made an important production modification to the markings on the pcb 34 Series relay. This relay is also widely used in industrial automation, typically as a PLC interface - marketed as the 38 and 39 series of Modular Interface Relays.The reasons for the change: greater precision in the cover welding process.

The manufacturing process involving ultrasonic welding of the relay cover has been changed to utilising the very latest laser welding techniques. This new procedure has necessitated a change in the plastics used for the cover of the EMR (Electromechanical Relay) version. This change has also made possible the improved readability of the essential technical data on the product. All new versions of the Ultra-Slim 34 Series will in fact be identified as either EMR or SSR (solid state relay), as appropriate, and carry the full product code.This feature greatly helps panel builders and installers, especially in cases where the relay in the panel must be replaced. This useful feature is now present on all of our plug-in relay series.