Speed Lubricants

Miraj, Sangli, Maharashtra

Description : VACUUM 4 pump oil is a specially developed product having low vapour pressure (1 x 10-6 mm of hg at 200c) and high thermal stability. it meets gost: 23013- 78 specification for vacuum pumps oil and is recommended for high vacuum producing diffusion pumps.

Description : WET BRAKE ULTIMA is a universal oil for transmission and hydraulic system of tractors equipped with wet disc brakes. It is specially formulated to meet the requirements of swaraj and Mahindra & Mahindra tractors. It is made from high viscosity index base oil which are further fortified with antioxidant and other required additives.

Description : GEARUP 85W-140 oil is a heavy duty multigraded special purpose gear lubricant. this oil is blended from selected base stocks and contain specific additive package to provide extreme pressure, anti-rust-corrosion characteristics.

Descrption : These are specially formulated antistatic coning oils. They are recommended for use in Textile Industry as finishing agent. They are high refined, light coloured, low viscosity mineral oil based products containing suitable emulsifier, antistatic, friction reducing and anti-splashing agents to minimize the oil dosage during coning and twisting operation. They provide excellent lubricity to filaments and reduce friction during operation.

Description:

• Autoclaved Aerated Concrete(AAC) Mould Oil is a combination of some specific oils and non hazardous chemicals which are formulated to form such properties that can be superior as compared to the regular mould oil.
• It is dispense in gray colored liquid which can be used directly on the sites.
• The chemical components that is present inside mould oil gives damp proof property to it which ensures perfect texture and even color to the concrete. It also prevents any kind of adhesion to cement. It passes air to concrete while it is placing which will help it in strengthen. It is cost effective and very economical for use.
• There is no need to prepare new moulds but if using the extensive moulds of timber it is highly suggested to protect them from alkali especially the new surfaces because it results shorten the usable life of mould. Steel moulds need no treatment or any special kind of treatment it only requires removal of rust and oil from its surfaces, although wetting may improved by abrading the surface lightly. Coating has to be done with the help of spay no over coating is needed if it does so remove it and make sure only particular amount has been applied to get best results. After using the spraying tool wash it well with clean tap water so the oil can remove from it easily dry it completely and store well for further use. The converging rate depends on the mould material it fluctuate as per the age of mould like new one requires less an old ones need more apparently.

Description : Premium hydraulic oils are made from high viscosity index & chemically stable base stocks which are further fortified with antioxidants, anticorros on, antiwear and antifoam additives Specially developed for sophisticated hydraulic devices with hydro mechanical actuators. They meet the requirement of very high pressure system and also of system where high pump speeds are encountered.

Description : GEAR UP oil is an extreme pressure automotive gear lubricants. this oil is blended from selected base stocks and contains specific additive pakckage to provide extreme pressure, anti-rust-corrosion characteristics. this formulation has been specially developed for synchromesh transmission, heavy duty enclosed gear drives.

Description : GEARUP 80W-90 is a premium quality automotive gear lubricant specially formulated to meet the requirements of the new class of compactly built synchromesh gearboxes. the compactness of the new class of gearboxes with increased power density, low clearances and with gear assembly partly submerged in the oil, results in the gear oil being subjected to greater operational severity. GEARUP 80W90 is tailormade for such applications with superior thermo - oxidative stability, high ep and anti wear properties, low copper activity, enhanced protection against corrosion, rust and formation of sticky deposits.

Description : These are lithium soap multipurpose greases having excellent water resistance properties, high oxidation stability, maximum structural stability with superior anti-rust and anti-corrosion properties, they meet the requirements of all industrial grease applications for plain and anti-friction bearings.

Description : These are calcium complex greases having inherent extreme presssure anti-wear anti freeting and wbricity properties designed to cover nearly all greases application requirements. Runner gel are suitable for use under both dry and wet conditions and due to good dropping point.

Description : Xtreme hydraulic oils are made from high viscosity, index & chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. Specially developed for sophisticated hydraulic devices with hydro-mechanical actuators. They meet the requirement of very high-pressure system and also of system where high pump speeds are encountered.

Description : Jet Speed KNITTING OIL is the oil developed to meet the requirement of the knitting industry. Knitting oils with acceptable water wash ability along with adequate lubricant and anti wear properties are not available in the Indian market. Some oils are claimed water white but have poor anti wear properties and do not have good wash ability. Some register positive copper corrosion and rust test giving rise to abnormal needle wear. In trials conducted in Southern India in circular knitting machines from Korea JET SPEED KNITTING OIL (ISO VG 22 Grade) showed improved performance as compared to competitors. Suitable for all types of knitting machines Stains are water washable and the product is water white. Has good anti wear and lubrication properties Ensures resistance and controlled needle temperatures during high speed knitting with circular Knitting machines.

Description : RUSTOL HD these products are soft, waxy solids at room temparature. they do not contain any solvent, but their base materials are oil with additives like wax, lanolin and petroleum sulphonates.

Description : RUSTOL MD these products are solvent contain but their base materials are oil with additives like wax, lanolin and petroleum sulphonates.

Description : Mould release aluminium shuttering is ready to use kind of releasing agent which is used for formwork and mould. It is mainly used for the purpose of easy and clean stripping for different moulds it also ensure quality concrete which has no stain and it is fair faced and have high quality. With perfect selection and combination of mineral oil and chemical it produces such qualities which are far much superior as compared to conventional mould oil. It can applied by using spay the even coating is necessary if in case at some places the layer become this it is suggested to remove it with the help of cotton or sponge. Drying of releasing agent may vary as per the atmospheric conditions for good to hot temperature it takes 10-15 minutes while in low and highly humid temperature the drying time raises to 1-2 hours.

Description : RUSTOL LD these products are oil based contain any solvent, but their base materials are oil with additives like wax, lanolin and petroleum sulphonates.