Write a Review
Our Product / Services
Surface Finishing Machines
2 Products availableChemical Equipment
2 Products availableMaterial Testing Labs & Services
2 Products availableOur product range contains a wide range of Orsatappratus, Cross Hatch Cutter Kit, Petroleum Equipment Cup Flash Point Tester, ERICHSEN CUPPING TEST MACHINE and Bookfield Viscometers
NDT tests for civil and structural evaluations both at site as well as lab. We regularly provide NDT testing services to petroleum refineries, hydro-power and thermal power plants, fertilizers, bridges etc. We also have facilities for Residual Life Assessment and Structural safety tests for concrete bridges, water tanks and old buildings including those damaged by fire, as well as load test on bridge structure. Routine test includes:
Complete solutions for Lab Testing Services
Direct spectrometer techniques give very fast and accurate results provided standard samples are available in substantial quantities. Spectro Labs was the first lab to introduce direct Spectrometer (OES) techniques for metal analysis. It has the largest capability in the country to analyze any Metal- ferrous, non-ferrous or precious metals.Spectro has the largest range of certified reference materials (CRM) to cover the entire range of metals.Metals not possible to analyze by direct optical emission spectrometer are analyzed by XRF or by ICP Spectrometer. The XRF spectrometer has the capability to analyze elements from sodium to uranium in the periodic table, While the ICP can analyze many other elements not possible by above techniques. All precious and rare metals are now possible to be analyzed by these techniques. Hazardous elements and restricted substances like Pb, Cd, Hg and total Cr can also be analyzed in plastics and rubbers.
Corrosion studies in chemical plants and cross country pipelines and evaluate stability of structures. In-site metallographic technique is also used independently to evaluate various types of corrosion in equipment and components working under severe conditions.
Evaluation of pitting, crevice corrosion, corrosion fatigue, sensitization and stress corrosion cracking in boiling MgCl2or CaCl2incorporates qualitative as well as quantitative features.
Intergranular corrosion tests
Corrosion Major Equipments
Chloride Stress Corrosion Test as per ASTM Gr 36 Specification
This is an EU regulation that places greater on us on, manufacturers, importersanddistributorsof substances to providesafety data and manage hazardsassociated with their products.
Registration:REACH registration requires manufacturers and importers to generate data on the substances they manufacture or import and to use these data toassess the risks related to these substancesand to develop and recommendappropriate risk management measures.
EACH compliant, its constituent components must be REACH compliant. Where access to the composition is not available for constituent components, supply chains, and suppliers must provide evidence and declarations to prove to their customers that they meet REACH requirements.
Yet, these declarations provide only limited assurance. Chain of custody control should therefore be an important part of any REACH compliance strategy. And, a balanced process of engagement and involvement of the supply chain, supported by auditing and monitoring, needs to be implemented to control risk and costs.
SPECTROs auditingsolutions will help ensure that the desired processes and procedures for REACH compliance are being followed. SPECTRO will consolidate the audit findings, and send the customer and the supplier a REACH performance report.
The SPECTRO REACH Audit will:
If support is needed, SPECTRO can also support suppliers and customers by:
Spectro Analytical Lab division provides a complete Food Testing Solutions with a wide range of expertise and capabilities. The NABL accredited Food Laboratory use various National and International test methods such as AOAC, USDA, USFDA, PAM, BAM, EPA & Indian Standards (IS) with National & International Standards such as Codex, PFA, EIA, APEDA and IS etc.
Testing facilities are available for Raw & Processed Foods, Cereals, Grains, Nuts, Milk & Dairy Products, Fruits, Vegetables, Juices, Jam, Beverages, Ice-creams, Confectionary, Honey, Spices & Condiments, Oils & Fats, Meat & Poultry Products, Fish, Ready to eat Foods, etc for the quality control as well as Food Safety purposes.
Tests are undertaken to IS, ASTM, API and customer Specifications on the following products-
Test Parameters Include
Microbiological tests on cosmetics, Perfumes and essential oils
Cosmetics and pharmaceuticals
Failure analysisis the process of collecting and analyzing all the data to identify the cause of a failure and how to prevent it from recurring. It is an important discipline in many industries, such as the electronics industry, petrochemicals industry where it is a vital tool used in the development of new methods & products and for the improvement of existing methods & products. The main principle of failure analysis is a forensic inquiry into the method or product upon the failure. Such inquiry can be conducted using scientific analytical methods such as mechanical, Non-destructive and electrical testing measurements, or through speculative approach when the data is not available but an action has to be taken.
Failure analysis and prevention are important functions to all of the engineering disciplines. The materials engineer often plays an important role in the analysis of failures, whether failure occurs during manufacturing or production processing or component/product fails in service.
Features of root cause failure analysis capabilities include:
Spectros Failure Analysis reports provide a clear picture of the root cause, and include recommendations to avoid future failures - from component design, through material selection and processing. Over the last few years many such types of evaluations have been performed.
Soil testing is performed to determine the density, moisture content and drying effects. Soil assessed in this area is usually used to fill in roads or structures, this is where the particle size is determined to predict the physical performance, characteristics and classification of the soil.
Chemical analysis on soil is performed to assess whether chloride, sulphate or an organic matter is present.
This can result in the corrosion of an embedded reinforcement when used in construction with concrete. Therefore it allows us to determine whether any special cement needs to be incorporated into the mix to prevent this from happening.
Spectro's welded structures inspection and consultancy fulfills the needs of the welding industry from guidance at design stage, through to the testing of your welding structure and co-ordination of welding structure at production.
Our welded structure tests can be used as an only source of welding engineering. You will find that Spectro can offer flexibility to suit your requirements cost effectively.
Welded structures certification
The tests for welded structures are:
Visual inspection
Penetrant inspection
Magnetic particle inspection
Radiography
Ultrasonic inspection
Macro examination
Mechanical testing
Fracture test
Load & Tensile Test and Proof Stress Tests with controlled strain rate and at different temperatures, from ambient to 600 deg C.
Test Materials
Wood Lignite Coal
Secondary Solid Fuels
Charcoal Coke Bricquetted fuels Plant derivatives like Rice husk. Fossil Fuels
Tests Include
Calorific value(Gross/net)Proximate analysis- Moisture, Volatile matter, Ash and Fixed CarbonUltimate analysis- C, H, O, N, S and Ash.Ash analysis- Al2O3, SiO2, CaO, MgO, TiO2, Na2O, K2O, S etc., Ash Fusion Temperature
Ferrous materials
Microstructural tests on non-ferrous alloys
Rajkumar Singh (Spectro Lab Equipments Pvt. Ltd.)
E-41, Okhla Industrial Area, Phase -ii, Delhi - 110020
Share us via
