Our Products
We offer high quality range of ceramic heater that is manufactured by using special ceramic material "stealite" with high thermal conductivity. Widely used in various industries such as Textile, Chemicals, Fertilizer and others, these are appreciated across the globe owing to the following features:
Versatile
Especially to heat the cylinders (barrels) on all types of plastics (s) processing machinery
Higher wall densities provide higher operating temperatures
Maximum sheath temperature up to8000C
Maximum wait density = 50 watts / square inches
By the use of higher temperatures, faster shot sequence is possible
We are engaged in offering high quality range of mica band heater that is widely used lo heat the molds .dies, nozzles and especially to heat the cylinders (barrels) on all types of plastic (s) processing machinery. It provides excellent thermal conductivity as heat transfer by "conduction".
Below mentioned are some of its unique features and specifications:
Best heat Transfer capability
Faster heating up a cooling down is possible
Maximum sheath temperature up to 480oC (900oF)
Maximum Walt density = 25 watts / square inches
Note: In case where high watt densities is required is important that all heaters should be used with appropriate, approved and precise temperature control / sensor device (s).
Our range of high density cartridge heaters are among the most versatile and widely used cartridge heaters throughout the industry These are valuable for alleviating problems created by high wall densities, high wattage, excessive vibration poor fit or where short heater life is a constant problem. These are also widely used to heat the plastic injection molds, dies hot platens, platens and many more.
Below mentioned are its specifications:
Actual Diameter inches -002 (Upto dia 58") a 004 (above 4a %)
Actual Diameter MM-050 (Upto dia 16mm) & 80(above Dia 20mm)
Resistance Tolerance-NEMA standard plus 10 % minus 5 %
Wattage Tolerance-NEMA standard plus 5 % minus 10 %
Application Areas:
Designed for High Watt density
The use of high purity Mgo insulation assures high dielectric strength fast heat transfer efficiency
Swaging increases the high thermal conductivity and uniform heating
Shock and Vibration resistant
Available also with built in thermocouple
Inch |
1/8" | 1/4" | 3/8" | 5/16" | 1/2" 5/8" | 3/4" | 1" | |
Metric |
6.5 | 8 | 9.5 | 10 | 12 12.5 | 16 | 19 | 25.4 |
We offer low density cartridge heaters of various sheath diameters and lead terminations is used in any assembly, equipment of machines and others. It consists of a helically wound resistance coil made from nickel-chrome wire evenly stretched and strung through holes ma round steatite ceramic insulator. These are in high demand owing to some of the unique features such as high purity MgO is used, high conductivity, longer operating heater life.
Below mentioned are its application areas:Plastic InjectionPackaging Machinery Heat sealing Shoe machineryLabeling machines Hot stamping and liquidsAnd many other types of heating applications
These are available in following specifications:Resistance Tolerance : NEMA standard plus 10 % minus 5%Wattage Tolerance : NEMA standards plus 5% minus 10%
Inch | 1/8" | 1/4" | 3/8" | 5/16" | 1/2" | 5/8" | 3/4" | 1" | |
Metric | 6.5 | 8 | 9.5 | 10 | 12 | 12.5 | 16 | 19 | 25.4 |
Our range of Titanium Heaters & Glass Heaters has proven to be a good choice for many Solutions such as Sulphuric accord or hydrochloric acid. Available in 1", 2", these are used in R & D / Laboratories, nickel, alkali, gold solutions and others. We also offer protection guard for heaters as Silica & glass heaters being fragile requires to be protected and we do it by Polypropylene perforated that is available for all heater lengths.
We are engaged in offering high quality and durable range of Strip Heater & Air Heaters. These are available in SS sheathed working temp, 350"C" U" type long life finned heaters available in various sizes. We also offer elements type heaters & refractory.