Backed by a team of skilled personnel, we are engaged in supplying a wide collection of Lightning Event Counter. By using an inductive record, the counter will be able to count all lightning events for a later reference accurately.

Operating Principle:

• SLSC works with an inductive effect of the lightning strike current. The events are monitored by a mechanical counter display. The counter includes a high frequency transformer.

Applications and Descriptions:

• Current detected from 2 to 200 kA
• Non Resettable
• Mechanical Counter with 6 digits
• Easy mountable
• Does not require any external power supply
• Serial Counter
• Dimensions: 11, 3x7x4, 8 cm.

We offer Surge Protection Devices For ITC Systems to our client.

Surge Protection for Information Technology Systems:

• Wide range of surge protection devices
• Designed for the protection of data and communications
• SD, SDB, SDB/R, SDE, SD 2/100 M 5cat, SCHIRTECNET 4/250M 6 cat, SSPD-TESTER-1, SSPD-TESTER-2, ADAPTOR SX 2.10, SCHIRTECNET, SCHIRTECTEL

Coaxial Protection:

• Innovative coaxial high-frequency protection range
• Designed for protection of equipment connected to an aerial system by means of coaxial cables

The SDGDT 100 EX is a High Performance Gas Discharge Tube, which works in Extreme Areas according to the Standard ATEX 94/9/EC. The potential equalization works according to the Standards IEC 61024-1 and IEC 60364-5-54 and it is suitable for IT facilities as well as EN50014 and EN50028. The SDGDT 100 EX is used when a potential equalization of the lightning current has to be achieved over electrically insulated components. It can be installed inside, outside or underground.

We provide to our clients high quality range of Data Line Surge Protection Device. It prevent surge where data lines run and are susceptible to transient over voltages. It provide a low impedance connection between terminals once the clamp voltage has been exceeded. We offer our range at market leading prices.

We offer Electrical Surge Protection Device to our client.

• Buildings with a very high level of need for protection, known as Lightning Protection Level 1-LPL I (Imp=100 kA)
• Hospitals, banks, transmission points for GSM/BTS, water stations, power plants, aerodrome control towers, explosion prone buildings
• Bigger industrial buildings, buildings with particular importance
• S45, S55, S50-50, S50-3, SB*, SBN80, SBN100, S100, SBN25

Keeping track with market development, we are engaged in manufacturing and supplying extensive array of Earthing Electrode. Our offered Earthing Electrodes are fabricated using high grade raw material and as per the set quality standards at the well developed manufacturing units. These are acknowledged among our clients for their quality and are available in various specifications. Clients can avail the offered range from us at discounted prices.

Features:

• 50 mm G. I pipe (secondary electrode) & 50 mmx6 mm (Primary Electrode)
• 80 mm G.I. Pipe (Secondary Electrode & 50 mmX6 mm G.I.Strip (Primary Electrode)
• 100 mm G.I. Pipe (Secondary Electrode) & 50 mmX6 mm G.I.Strip (Primary Electrode)

We are an eminent manufacturer and supplier of a wide collection of Earth Rod. The offered rods are fabricated using fine quality raw material sourced from the trusted vendors of the industry. In order to manufacture these, we use units that are integrated with high end technology and skilled labor as per the industrial standards. Further, these rods are provided in varied specifications to meet the needs of our clients accurately.

Features:

• Solid Copper Earth Rods
• 14 mm MS Rod molecularly
• Bonded with 250 micron copper as per UL specifications -16 mm, 19 mm, 25 mm,
• MS Rods molecularly bonded with 250 micron copper conforming to UL specifications are also available

We are instrumental in supplying of a comprehensive range of surge protection devices that is designed in-accordance with the international quality standards.

• Buildings with a moderate need for protection, requiring a Lightning Protection Level of III and IV - LPL III and LPL IV (Iimp = 50 kA)
• LPL III: apartment houses, small administrative buildings, family houses, agricultural structures
• LPL IV: buildings and halls without the presence of people and/or internal equipment
• Objects with the main back-up fuse up to 63A connected by a buried cable.
• SDL-*, SDL-*HFF, SDL-3*HFF, SDL-16/400 HFF, SDLTN, SDL-25RFI, SDI-16, SZS-1I, SZS-1P, SZS-1.*C, SZS-1*T, SPRO F, SPRO F/TEL, SPRO F/TV

• The Testing Device is installed at a 45 degree angle to the pole facing south.
• The Testing Device is connected through a cable with the E.S.E Lightning Conductor.
• The Testing Device has to be switched ON.
• A test has to be performed

How to perform a test?

In order to perform a test of the functionality of any SCHIRTEC E.S.E. Lightning Conductor you have to:

• Press the red TEST button for 2 - 3 seconds on the Remote Controller.
• The RX/TX LED lights up in red.
• After relasing the button the Testing Device,
• which is connected to the SCHIRTEC E.S.E.
• Lightning Conductor, performs the test.
• After a few seconds the test result will be transmitted via radio frequency to the remote Controller.

When the green OK LED lights up and starts blinking; the E.S.E. Lightning Conductor is fully functional. When the red FAULT LED lights up and starts blinking; the E.S.E. Lightning Conductor is not functional and has to be controlled immediately. Please note that the Testing Device stores energy to operate for 24 hours taking into consideration that it is exposed to 5-7 hours of sun light daily.

With our immense domain expertise, we are engaged in offering a superior quality Mobile Electrode. These Mobile Electrodes are manufactured by skilled professionals using optimum quality factor inputs. Our highly qualified team of quality controllers tests the entire range of products on various industrial parameters in order to ensure its quality and performance. These Electrodes are available at economical prices in different technical specifications as per clients requirement.

Features:

• 65 mm, 1.2 metre long
• Supreme quality
• Compact design

DMSGI ( 2nd Generation Lightning Protection System ) The Protector is an active lightning conductor designed to conform to the French standard NF C 17 102 (July 1995) for ESE lightning conductors. Its working principle evolves from local electrostatic field that develops naturally around the system as a thunderstorm begins to gather. In the event of a descending lightning, an inbuilt triggering device generates high-tension pulses at the conductor tip, causing a 'corona effect'. As the downward leader approaches the ground, powerful upward streamers get triggered off, aided by a strong venturi effect that is built in the system. The early synchronization between the downward and upward leaders thus achieved by the Protector , easily meets the triggering advance timing (Delta T) as laid down in the French standard NF C 17 102.

Backed by a team of skilled personnel, we are engaged in supplying a wide collection of Lightning Event Counter. By using an inductive record, the counter will be able to count all lightning events for a later reference accurately.

Operating Principle:

• SLSC works with an inductive effect of the lightning strike current. The events are monitored by a mechanical counter display. The counter includes a high frequency transformer.

Applications and Descriptions:

• Current detected from 2 to 200 kA
• Non Resettable
• Mechanical Counter with 6 digits
• Easy mountable
• Does not require any external power supply
• Serial Counter
• Dimensions: 11, 3x7x4, 8 cm.

We offer Surge Protection Devices For ITC Systems to our client.

Surge Protection for Information Technology Systems:

• Wide range of surge protection devices
• Designed for the protection of data and communications
• SD, SDB, SDB/R, SDE, SD 2/100 M 5cat, SCHIRTECNET 4/250M 6 cat, SSPD-TESTER-1, SSPD-TESTER-2, ADAPTOR SX 2.10, SCHIRTECNET, SCHIRTECTEL

Coaxial Protection:

• Innovative coaxial high-frequency protection range
• Designed for protection of equipment connected to an aerial system by means of coaxial cables

The SDGDT 100 EX is a High Performance Gas Discharge Tube, which works in Extreme Areas according to the Standard ATEX 94/9/EC. The potential equalization works according to the Standards IEC 61024-1 and IEC 60364-5-54 and it is suitable for IT facilities as well as EN50014 and EN50028. The SDGDT 100 EX is used when a potential equalization of the lightning current has to be achieved over electrically insulated components. It can be installed inside, outside or underground.

We provide to our clients high quality range of Data Line Surge Protection Device. It prevent surge where data lines run and are susceptible to transient over voltages. It provide a low impedance connection between terminals once the clamp voltage has been exceeded. We offer our range at market leading prices.

We offer Electrical Surge Protection Device to our client.

• Buildings with a very high level of need for protection, known as Lightning Protection Level 1-LPL I (Imp=100 kA)
• Hospitals, banks, transmission points for GSM/BTS, water stations, power plants, aerodrome control towers, explosion prone buildings
• Bigger industrial buildings, buildings with particular importance
• S45, S55, S50-50, S50-3, SB*, SBN80, SBN100, S100, SBN25

Keeping track with market development, we are engaged in manufacturing and supplying extensive array of Earthing Electrode. Our offered Earthing Electrodes are fabricated using high grade raw material and as per the set quality standards at the well developed manufacturing units. These are acknowledged among our clients for their quality and are available in various specifications. Clients can avail the offered range from us at discounted prices.

Features:

• 50 mm G. I pipe (secondary electrode) & 50 mmx6 mm (Primary Electrode)
• 80 mm G.I. Pipe (Secondary Electrode & 50 mmX6 mm G.I.Strip (Primary Electrode)
• 100 mm G.I. Pipe (Secondary Electrode) & 50 mmX6 mm G.I.Strip (Primary Electrode)

We are an eminent manufacturer and supplier of a wide collection of Earth Rod. The offered rods are fabricated using fine quality raw material sourced from the trusted vendors of the industry. In order to manufacture these, we use units that are integrated with high end technology and skilled labor as per the industrial standards. Further, these rods are provided in varied specifications to meet the needs of our clients accurately.

Features:

• Solid Copper Earth Rods
• 14 mm MS Rod molecularly
• Bonded with 250 micron copper as per UL specifications -16 mm, 19 mm, 25 mm,
• MS Rods molecularly bonded with 250 micron copper conforming to UL specifications are also available

We are instrumental in supplying of a comprehensive range of surge protection devices that is designed in-accordance with the international quality standards.

• Buildings with a moderate need for protection, requiring a Lightning Protection Level of III and IV - LPL III and LPL IV (Iimp = 50 kA)
• LPL III: apartment houses, small administrative buildings, family houses, agricultural structures
• LPL IV: buildings and halls without the presence of people and/or internal equipment
• Objects with the main back-up fuse up to 63A connected by a buried cable.
• SDL-*, SDL-*HFF, SDL-3*HFF, SDL-16/400 HFF, SDLTN, SDL-25RFI, SDI-16, SZS-1I, SZS-1P, SZS-1.*C, SZS-1*T, SPRO F, SPRO F/TEL, SPRO F/TV

• The Testing Device is installed at a 45 degree angle to the pole facing south.
• The Testing Device is connected through a cable with the E.S.E Lightning Conductor.
• The Testing Device has to be switched ON.
• A test has to be performed

How to perform a test?

In order to perform a test of the functionality of any SCHIRTEC E.S.E. Lightning Conductor you have to:

• Press the red TEST button for 2 - 3 seconds on the Remote Controller.
• The RX/TX LED lights up in red.
• After relasing the button the Testing Device,
• which is connected to the SCHIRTEC E.S.E.
• Lightning Conductor, performs the test.
• After a few seconds the test result will be transmitted via radio frequency to the remote Controller.

When the green OK LED lights up and starts blinking; the E.S.E. Lightning Conductor is fully functional. When the red FAULT LED lights up and starts blinking; the E.S.E. Lightning Conductor is not functional and has to be controlled immediately. Please note that the Testing Device stores energy to operate for 24 hours taking into consideration that it is exposed to 5-7 hours of sun light daily.

With our immense domain expertise, we are engaged in offering a superior quality Mobile Electrode. These Mobile Electrodes are manufactured by skilled professionals using optimum quality factor inputs. Our highly qualified team of quality controllers tests the entire range of products on various industrial parameters in order to ensure its quality and performance. These Electrodes are available at economical prices in different technical specifications as per clients requirement.

Features:

• 65 mm, 1.2 metre long
• Supreme quality
• Compact design

DMSGI ( 2nd Generation Lightning Protection System ) The Protector is an active lightning conductor designed to conform to the French standard NF C 17 102 (July 1995) for ESE lightning conductors. Its working principle evolves from local electrostatic field that develops naturally around the system as a thunderstorm begins to gather. In the event of a descending lightning, an inbuilt triggering device generates high-tension pulses at the conductor tip, causing a 'corona effect'. As the downward leader approaches the ground, powerful upward streamers get triggered off, aided by a strong venturi effect that is built in the system. The early synchronization between the downward and upward leaders thus achieved by the Protector , easily meets the triggering advance timing (Delta T) as laid down in the French standard NF C 17 102.