Product Name : Single Crystal Silicon Wafer P/N Type 4 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Boron as a dopant

Type of surface: Single-sided polished

Diameter and thickness: D* = 4 inch and thickness =52520 m

Semiconductor properties:

Physical properties: Resistivity: 10 -cm

Product Name : Single Crystal Silicon Wafer P/N Type 3 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

(Orientation):

Type of surface: Single sided polished

Diameter: D* = 3 inch

Thickness = 0.5mm

Semiconductor properties (Orientation):

Resistivity: < 5-10 -cm

Product Name : Single Crystal Silicon Wafer P/N Type 4 inch (Dia)

Silicon Wafer ( N-type/Dopant - Phos. )

Type of surface: Single sided polished

Diameter: D* = 4 inch

Thickness = 52520 m

Semiconductor properties (Orientation):

Resistivity: < 10-20 -cm

Product Name : Single Crystal Silicon Wafer P/N Type 2 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Silicon Wafer

Grade Prime (Si+Sio2 (wet))

Diameter: D* = 2 inch

Type & Dopant: P Boron

Orientation :

Resistivity: 01-10 -cm

Polished: Single Side polished

Thickness = 380 25 m

Coating Thickness 300 nm

Product Name : Single Crystal Silicon Wafer P/N Type 3 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Grade Prime (Si+Sio2 (wet))

Diameter: D* = 3 inch

Type & Dopant: N phosphorous/Boron

Orientation:

Resistivity: 01-10 -cm

Polished: Single Side polished

Thickness = 380 25 m

Coating Thickness 300 nm

Product Name : Single Crystal Silicon Wafer P/N Type 6 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Grade Prime (Si+Sio2 (wet))

Diameter: D* = 6 inch

Type & Dopant: N phosphorous/Boron

Orientation:

Resistivity: 01-10 -cm

Polished: Single Side polished

Thickness = 380 25 m

Coating Thickness 300 nm

Description:-

Silicon wafers are available in a variety of sizes ranging from (1 inch) to (6 inches).We want to laser cut the wafer to create a substrate for a microfluidic device and produce thin silicon discs used every month to make products such as integrated circuits and high-performance electronics.This will experience a slight decline due to the fall in silicon prices and the falling demand for the product, Silicon wafer suppliers can be time consuming and difficult to find The best polished Silicon Wafer deals are obtained directly from their suppliers. A wafer is a thin piece of semiconductor material, normally silicon crystal. These wafers are used to fabricate integrated circuits and other micro devices. Silicon wafers are available in a variety of sizes ranging from (1 inch) to (6 inches).

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Product Name : Carbon Coated TEM Grid

The grids used in TEM microscopes to place specimens are usually made of copper with a mesh size of about 3 mm and a layer of plastic called a formvar and a thin film of carbon.When the samples are placed on the coated grids, the uniformity of the sample layer is one of the important points for proper imaging of biomolecular complex in aqueous solution. For this purpose, it is necessary that the surface in contact with the biological sample, in addition to being hydrophilic, is completely free of contamination. The layer commonly considered as supporting layer is a few nanometer thin film of amorphous carbon. This thin film absorbs the particles across the holes in the grids used in TEM imaging and minimizes the effect of the support in TEM images.

Unfortunately, the grids used in TEM are hydrophobic after carbon coating. This causes the orientation and concentration of the particles in different holes of grid to be different and the sample not to be uniformly placed on the supporting grid. As a result, the surface needs to be treated before placing the combination of biomolecules and water to spread the sample with minimum thickness on it. Hydrophilicity and hydrophobicity of a surface means how water interacts with that surface. If water beads up into droplets and does not spread evenly across the surface, is hydrophobic. On hydrophobic surfaces, the contact angle of water droplets with the surface is large. In contrast, if a drop of water that is placed on the surface is evenly distributed and has a small contact angle with the surface; it is called a hydrophilic surface. The usual way to increase the hydrophilicity of the TEM grids is to place them in a low power oxygen or argon plasma environment.

Portable Yes

Magnification 1000 X

Model SCM -006

Colour Black

Shape Round

Mesh size 100, 200, 300, 400

Application TEM

Minimum Order Quantity 1 Pack (Pack of 25 Pcs, ), (Pack of 50 Pcs, )

Usage/Application : Scientific Research

Specifications:

Extensive Range of Grids for TEM applications

Square, Hexagonal, Rectangular, Parallel, Slot & Round Mesh Shapes

Finder and folding Grids

Sizes Range : 50, 75, 150, 200, 300 and 400, 600, 700, 1000, 1500 and 2000 Mesh

Carbon, Copper, Nickel, Gold, gilded and platinized

Special Metals: Aluminum, Molybdenum, Stainless Steel & Titanium

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Copper Coated TEM Grid

A TEM grid is typically a flat disc with a mesh or other shaped holes used to support thin sections of specimen. The holes in the grids allow the electrons to pass through. Grids are available in a wide variety of patterns and materials for various applications. In general, 200-400 mesh (lines/in) grids are used in TEM experiments. Most EM grids are made of copperbecause it is non-ferromagnetic and thus minimally distorts the magnetic field of the objective lens

Portable Yes

Magnification 1000 X

Model SCM -006

Colour Gray

Shape Round

Mesh size 100, 200, 300, 400 Mesh

Application TEM

Minimum Order Quantity 1 Pack (Pack of 25 Pcs, ), (Pack of 50 Pcs, )

Usage/Application : Scientific Research

Specifications:

Extensive Range of Grids for TEM applications

Square, Hexagonal, Rectangular, Parallel, Slot & Round Mesh Shapes

Finder and folding Grids

Sizes Range : 50, 75, 150, 200, 300 and 400, 600, 700, 1000, 1500 and 2000 Mesh

Carbon, Copper, Nickel, Gold, gilded and platinized

Special Metals: Aluminum, Molybdenum, Stainless Steel & Titanium

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Aluminum Borohydride Micro powder

Aluminum Borohydride is produced by the reaction between sodium borohydride with aluminium chloride. The explosive liquid ignites suddenly in air and reacts dynamically with water to form hydrogen, used mainly in organic synthesis. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. Aluminum Borohydride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: 16962-07-5

Appearance colorless liquid

APS 1-5m (Can be Customized)

Purity 99%

Chemical formula H18AlB3

Molar mass 71.51 g mol-1

Density N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Note : We supply different size ranges of Lab, R&D Materials as per requirements and send e-mail soodchemicals@gmail.com, soodsalespurchase@gmail.com for any inqury & technical qus, Official quotation.

Product Name : Calcium Hydride Micropowder

Calcium Hydride is generally immediately available in most volumes. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: 7789-78-8

Appearance White Powder

APS 1-5 Micron (Can be Customized)

Purity 99%

Chemical formula CaH2

Molar mass 42.09

Density N/A

Melting Point : N/A

Boiling Point : N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

product name : polyvinylidene fluoride micro powder

pack size : 50 grams , 100 grams , 500 gram, 1000 gram ,

product description

polyvinylidene fluoride (pvdf), also known as polyvinylidene difluoride and pvf2, is part of the fluoropolymers family; a group of specialised, versatile polymeric materials with distinct properties that result from the strong bond between their carbon atoms and fluorine atoms and the fluorine shielding of the carbon backbone. pvdf is a specialty polymer with pyroelectric and piezoelectric properties and is used in the manufacturing of diverse high-purity, high-strength, and high-chemical-resistance products for applications in electrical, electronic, biomedical, construction, fluid-systems, oil-and-gas.electrical and electronic industrial wire, cable coating, sleeve, heat shrinkable tube, bobbin, wiring board, printed circuit board, wire harness device, anode shield, high dielectric constant capacitor film and electric heating band, optical fiber sheath or outer coating, etc. because the dielectric loss of polyvinylidene fluoride is larger, especially suitable for low voltage electrical insulation. good processing strength, flexibility, easy processing, good transparency, easy coloring, so it is an excellent insulation material for low voltage electrical products. after unidirectional stretching and polarization treatment of polyvinylidene fluoride, it can change the vibration energy into electrical energy, and can also change the electrical energy into vibration energy. in addition, good processing, can be processed into a variety of free shapes, its application scope is expanding, has been applied to the piezoelectric film audio components, such as 1020khz speakers, microphones, headphones, telephones, etc; such as> 20khz, up to 900mhz probe, microphone, ultrasonic microscope and ultrasonic air, etc.; measurement of vibration meter, pressure gauge, accelerometer, etc.; medical sphygmomanometer and palpation device; thermoelectric film has been used in radiation thermometer, infrared sensor, millimeter wave detector, radiation energy detector, laser energy detector; fire detector and anti-theft detector.

related information :

storage conditions:

airtight sealed, avoid light, and keep dry at room temperature.

suggest equipment

eyeshields, gloves, type n95 (us), type p1 (en143) respirator filter

Product Name : Gold Coated Tem Grids

Lacey carbon films are similar to the holey carbon films in that they have open areas but because of the fine lacey mesh structure they offer a greater percentage of open area in comparison (see micrograph). They provide the thinnest possible support film while maintaining adequate strength and give practically no background interference in the TEM. As much of the specimen is unsupported, these films are appropriate for use where a structure free background is of importance. Lacey carbon films are particularly suitable for studying some nanotubes, acicular crystals and biological/materials specimens.

Portable Yes

Magnification 1000 X

Model SCM -012

Shape Round

Thickness (m) 20 3

Mesh size 100, 200, 300, 400 Mesh

Application TEM

Minimum Order Quantity 1 Pack (Pack of 25 Pcs, ), (Pack of 50 Pcs, )

Usage/Application : Scientific Research

Specifications:

Extensive Range of Grids for TEM applications

Square, Hexagonal, Rectangular, Parallel, Slot & Round Mesh Shapes

Finder and folding Grids

Sizes Range : 50, 75, 150, 200, 300 and 400, 600, 700, 1000, 1500 and 2000 Mesh

Carbon, Copper, Nickel, Gold, gilded and platinized

Special Metals: Aluminum, Molybdenum, Stainless Steel & Titanium

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Product Name : Nickel Coated TEM Grid

Holey carbon films have many uses in microscopy but for certain applications the mesh sizes of standard TEM grids are too large to support the sample. Continuous carbon films can also be a problem due to the fact that the thin film can inelastically scatter electrons and contribute to background noise. Holey carbon films therefore are a suitable alternative. Holey carbon films have holes of various. In addition to providing support, the increased image contrast in the regions of the holes compared to regions of film is also of benefit. Typical applications include biological and materials science and cryo-TEM.

Portable Yes

Magnification 1000 X

Model SCM -014

Colour Gray

Shape Round

Mesh size 100, 200, 300, 400 Mesh

Application TEM

Minimum Order Quantity 1 Pack (Pack of 25 Pcs, ), (Pack of 50 Pcs, )

Usage/Application : Scientific Research

Specifications:

Extensive Range of Grids for TEM applications

Square, Hexagonal, Rectangular, Parallel, Slot & Round Mesh Shapes

Finder and folding Grids

Sizes Range : 50, 75, 150, 200, 300 and 400, 600, 700, 1000, 1500 and 2000 Mesh

Carbon, Copper, Nickel, Gold, gilded and platinized

Special Metals: Aluminum, Molybdenum, Stainless Steel & Titanium

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Activated Carbon Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Activated Carbon Nanopowder is made from a selection of Indonesian coconut shell charcoal through special carbonization, activation, grinding and classification, therefore, the nanopowder possesses the following features:Powerful specific surface Area (SSA>1300m2/g). Electrical conductivity (0.4.cm) high activation; Easy to disperse; Powerful iodine adsorption (absorption capability >1250mg/g) Methylene blue number >260mg/g; Negative-ions concentration 7150/cm3; Far Infrared emission rate 91%. Mainly used in military industry, aviation and aerospace, textile, rubber, functional materials, chemical industry, food, pharmaceutical, electronics technology, environmental protection, etc. Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposed to air. In addition, the product should be avoided under stress. Activated Carbon", also called activated charcoal or activated coal is a form of carbon that has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reaction.

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

E-mail: soodchemicals@gmail.com, infosoodchemicals@gmail.com

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customers requirements and also accept customization in various parameterts.

Product Name : Titanium Alumnium Carbide MAX Phase Powder

Pack Size : 10gram, 50gram , 100gram, 250 gram, 500 gram

Related Product:

Molybdenum Titanium Carbide Mo2TiC2

Titanium Aluminum Carbonitride Ti3AlCN

Titanium Carbonitride Ti3CN

Titanium Vanadium Aluminum Carbide

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Artificial Saliva

Pack Size : 50ml , 100 ml, 500 ml , 1000 ml

Product Description

An artificial saliva (AS) of defined composition is necessary for testing the performance of materials that serve in the mouth as natural saliva is too variable. The chemistry involved is critically important. Many AS recipes can be found in the literature, but the stability of tooth material, i.e. hydroxyapatite (HAP), in most of these has not been addressed. In fact, few contain all major ionic components with concentrations in the physiological range.

Related Information :

Precautions for safe handling

Ensure good ventilation/exhaustion at the workplace.

Avoid contact with skin, eyes and clothing

Avoid breathing fumes.

Use personal protection equipment as outlined in section 8.

Information about protection against explosions and fires: No special measures required.

Conditions for safe storage, including any incompatibilities

Storage:

Requirements to be met by storerooms and receptacles: Store under refrigeration

Information about storage in one common storage facility: Not required.

Further information about storage conditions: Keep receptacle tightly sealed.

Specific end use(s) No further relevant information available.

Product Name : Boron Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Boron is a chemical element with the symbol B and atomic number 5. In its crystalline form it is a brittle, dark, lustrous metalloid; in its amorphous form it is a brown powder. As the lightest element of the boron group it has three valence electrons for forming covalent bonds, resulting in many compounds such as boric acid, the mineral sodium borate, and the ultra-hard crystals of boron carbide and boron nitride.

Elemental boron is a metalloid that is found in small amounts in meteoroids but chemically uncombined boron is not otherwise found naturally on Earth. Industrially, the very pure element is produced with difficulty because of contamination by carbon or other elements that resist removal. Several allotropes exist: amorphous boron is a brown powder; crystalline boron is silvery to black, extremely hard (about 9.5 on the Mohs scale), and a poor electrical conductor at room temperature. The primary use of the element itself is as boron filaments with applications similar to carbon fibers in some high-strength materials.

Related Product:

Boron Nanoparticles (B, 99.9+%, 100nm)

Boron Nanoparticles (B, 99.5+%, 500nm)

Boron Nanopowder / Nanoparticles (B, 92%, 1-2um)

Boron MicroPowder (B, 1-2um, 99%)

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

E-mail: soodchemicals@gmail, infosoodchemicals@gmail.com

Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customers requirements and also accept customization in various parameterts.

Product Name : Chromium Nano powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the product should be avoided under stress. Cr Nanoparticles, Cr Nanoparticle, Cr Nanoparticle, Cr Nanoparticles, Cr Nanoparticles.Chromium (Cr) Nanoparticles should be gently placed and avoided violent vibration and friction. Chromium (Cr) Nanoparticles should be prevented from moisture, heat, impact and sunlight. The user must be a professional (This person must know how to use Chromium (Cr) Nanoparticles.)

Related Products:

Chromium Cr Powder, 99.5% (3, 5, 10, 30, 45um)

Chromium Powder / Cr Powder (Cr, 99.5%, 40um, metal basis)

Chromium Nanopowder / Nanoparticle (Cr, 99.9%, 35-45 nm, metal basis)

Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11

Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,

Product Name : Cobalt Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Electromagnetic-wave absorption; Electromagnetic-wave radiation shielding for cellar phones; Ferrofluids; High density magnetic storage; Magnetic inks; Magnetic toner in xerograph; Contrast agents in magnetic resonance imaging. Metal nanopowder should be gently placed and avoided violent vibration and friction. Metal nanopowder should be prevented from moisture, heat, impact and sunlight.

Related Products:

Co Cobalt (Co) Powder, 99.95% (1, 7, 8, 10, 15um)

Co Cobalt, 99.9%, 1-3um

Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, partially passivated, metal basis)

Cobalt (Co) Nanopowder / Nanoparticle (Co, 99.8%, 28 nm, carbon coated, metal basis)

Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17

Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11

Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,

Product Name : Conductive Carbon Black Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Our company's Conductive Carbon Black Nanopowder is produced by selecting perennial mountain trees as row materials, through high temperature (1300o C) carbonization, ultra-fine nano-grinding, therefore, the nanopowder possesses the following features: Powerful specific surface Area (SSA>700m2/g). Electrical resistivity (0.30.cm); Easy to be dispersed. It can be used for plastics, rubber, electronics technology, anti-static materials. It is all-natural, non-polluting material - It is the real green conductive material. Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the product should be avoided under stress.

Related Product:

Conductive Carbon Black Water Dispersion, 150nm

Conductive Carbon Black Dry Nanoparticles, 150nm

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Copper Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

The superficial conductive coating processing of metal and non-ferrous metal; Medicine append material; Capacitor materials; Raw material for bulk nanomaterial. Adopt the inert gas to make bulk copper nano composite material with powder metallurgy; Cu Nanoparticles widelly used as Catalysts; Efficacious catalyst: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyst in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol. Cu Nanoparticles used as Conductive coatings; Conductive inks; Conductive slurry: The copper nanopowder can be applied to the productiion of MLCC internal electrode and other electronic components in electronic slurry for the miniaturization of microelectronic devices; The electronic size with good performance made of copper nanopowder instead of valuable metal particles cuts cost to a large extent; This technology is used to the preference of microelectronic processes; Conductive pastes; Cu Nanoparticles are high thermal conductivity materials; Nanometal Lubricant additives: Adding 0.10.6% of copper nanopowder to lubricant oil and lubricant grease. It will form a self-lubricating and self-repairing coating film in the frictioning surface.

Related Products:

Copper Ag-Coated Nanopowder / Copper Silver-Coated Nanoparticles (300nm, Ag 20%, Cu 80%)

Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.5%, 800 nm, metal basis)

Copper (Cu) Nanoparticles / Nanopowder (Cu, 99.9%, 580 nm, metal basis)

Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 90-250 nm, metal basis)

Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 100nm, metal basis)

Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.9%, 70nm, metal basis)

Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 40 nm, metal basis)

Copper (Cu) Nanopowder / Nanoparticle (Cu, Cu2O Coated, 99%, 30 nm, metal basis)

Copper (Cu) Nanoparticles / Nanopowder (Cu, Partially Passivated, 99.8%, 25 nm)

Copper (Cu) Nanoparticles / Nanopowder (Cu-Carbon Coated, 99.8%, 25 nm)

Copper (Cu) Wire, D: 100nm, L: 15um, 99.5%)

Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/9:1

Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/1:9

Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/92:8

Ag-Cu Nanopowder / Nanoparticle, 99.9%,

Product Name : Cu Zn Alloy Nano powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Zinccopper couple is an alloy of zinc and copper that is employed as a reagent in organic synthesis. The couple has been widely applied as a reagent in other reactions requiring activated zinc metal. Zinccopper couple does not refer to a rigorously defined chemical structure or alloy composition. The couple may contain varying proportions of copper and zinc; the zinc content is typically greater than 90%, although an alloy containing similar proportions of zinc and copper is used in some cases. The couple is frequently prepared as a darkly-colored powder and is slurried in an ethereal solvent prior to being used in slight excess relative to the substrate. Activation of zinc by copper is essential to the couples utility, but the origin of this effect is poorly documented. It is speculated that copper enhances reactivity of zinc at the surface of the alloy.

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17

Fe-Ni 40-100 nm, Fe:Ni/5:5

Fe-Ni 40-100 nm, Fe:Ni/2:8

Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11

Cu-Zn 40nm Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Cu-In Alloy Nano powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Copper nanoparticles with great catalytic activities can be applied to biosensors and electrochemical sensors. Redox reactions utilized in those sensors are generally irreversible and also require high overpotentials (more energy) to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green.

One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described in Figure 3, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17

Fe-Ni 40-100 nm, Fe:Ni/5:5

Fe-Ni 40-100 nm, Fe:Ni/2:8

Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11

Cu-Zn 40nm Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Cu-In-Ga Alloy Nano powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Cu-In-Ga Alloy nanoparticles with great catalytic activities can be applied to biosensors and electrochemical sensors. Redox reactions utilized in those sensors are generally irreversible and also require high overpotentials (more energy) to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green.

One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described in Figure 3, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17

Fe-Ni 40-100 nm, Fe:Ni/5:5

Fe-Ni 40-100 nm, Fe:Ni/2:8

Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11

Cu-Zn 40nm Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Cu-In-S Alloy Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green.

One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17

Fe-Ni 40-100 nm, Fe:Ni/5:5

Fe-Ni 40-100 nm, Fe:Ni/2:8

Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11

Cu-Zn 40nm Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Fe-Cr-Co Alloy Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Stainless steel depends on chromium for its appearance and resistance to corrosion. Average chrome content in stainless steel is approx. 18%. It is also used to add chromium to carbon steel. FeCr from South Africa, known as "charge chrome" and produced from a Cr containing ore with a low carbon content, is most commonly used in stainless steel production. Alternatively, high carbon FeCr produced from high-grade ore found in Kazakhstan (among other places) is more commonly used in specialist applications such as engineering steels where a high Cr/Fe ratio and minimum levels of other elements (sulfur, phosphorus, titanium etc.) are important and production of finished metals takes place in small electric arc furnaces compared to large scale blast furnaces.

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17

Fe-Ni 40-100 nm, Fe:Ni/5:5

Fe-Ni 40-100 nm, Fe:Ni/2:8

Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11

Cu-Zn 40nm Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Fe-Ni-Co Alloy Nano powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. "Dumet" is a portmanteau of "dual" and "metal, " because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature.

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17

Fe-Ni 40-100 nm, Fe:Ni/5:5

Fe-Ni 40-100 nm, Fe:Ni/2:8

Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11

Cu-Zn 40nm Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Graphite Nano powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Natural graphite is mostly consumed for refractories, steelmaking, expanded graphite, brake linings, foundry facings and lubricants; Natural graphite has found uses as the marking material in common pencils, in zinc-carbon batteries, in electric motor brushes, and various specialized applications. Aluminum/graphite composites for bearings, pistons, and liners in engines. Carbon adsorbents for gas chromatography Cupper/graphite and silver/graphite nanocomposites for electrical brushes and contact strips Inorganic filler (graphite/polymer nanocomposites) Support materials for precision metal powder catalysts Graphite/polymer nanocomposites for enhanced electrical conductivity Metal matrix composites for reduced friction.

Related Product:

Natural Graphite Spherical Powder (3, 5, 10, 15, 20, 25um)

Synthetic Graphite Powder 8um & 75um

Natural Graphite Flaky Powder 3, 5, 10, 30um

Expandable Graphite Powder 300um, 280um, 180um

Graphite Nanopowder / Nanoparticle (C, 400nm - 1.2 um, 99.9%, Natural Graphite, Hydrophobic)

Natural Graphite Powder 20wt% Water Dispersion

Natural Graphite Powder 20wt% Ethylene Glycol Dispersion

Natural Graphite Powder 20wt% Mineral Oil Dispersion

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Product Name : Iron Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Utilized as probes of fundamental magnetic interactions; Media for magnetic data storage Ferro fluids for rotary vacuum seals; Biomedical applications such as magnetic separation and contrast agents for magnetic resonance imaging. In the environmental field in the degradation of chlorinated hydrocarbons and hard metals in contaminated soils; Single electron transistor. Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the iron nanoparticles should be avoided under stress.

Related Products:

Iron Fe Powder, 99% (1, , 4, , 5, 8, 10, 45, 75, 150, 200, 300um)

Iron Powder / Fe Powder (Fe, 99.9%, 800nm)

Fe Spherical Powder / Iron Spherical Powder (Fe, 800nm, Spherical, 99.9%)

Fe Spherical Powder / Iron Spherical Powder (Fe, 3um, Spherical, 99.9%)

Iron Fe Nanopowder / Nanoparticle (Fe, 99.5+%, 95-105nm, metal basis)

Iron Fe Nanopowder / Nanoparticle (Fe, 99.5+%, 65-75nm, metal basis)

Iron Fe Nanopowder / Nanoparticle (Fe, 99.5+%, 35-45nm, metal basis)

Iron Fe Nanopowder / Nanoparticle (Fe, 99.5%, 25 nm, partially passivated, Metal basis)

Iron Fe Nanopowder / Nanoparticle (Fe, 99.5%, 25 nm, carbon coated, Metal basis)

Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17

Fe-Ni Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni/5:5

Fe-Ni Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni/2:8

Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11

Fe Nanopowder / Fe Nanoparticles 25nm 5wt% Ethanol Dispersion

Iron Nanopowder / Iron Nanoparticles 25nm 5wt% NMP Dispersion

Iron Nanoparticles / Iron Nanopowder 25nm 5wt% Isopropanol Dispersion

Iron Nanoparticles / Iron Nanopowder 25nm 5wt% Acetone Dispersion

Fe Nanoparticles / Fe Nanopowder 25nm 5wt% Ethylene Glycol Dispersion

Fe Nanoparticles / Fe Nanopowder 25nm 5wt% Propylene Glycol Dispersion

Fe Nanoparticles / Fe Nanopowder 25nm 5wt% Toluene Dispersion

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Product Name : Magnesium Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Magnesium is a chemical element with the symbol Mg and atomic number 12. It is a shiny gray solid which shares many physical and chemical properties with the other five alkaline earth metals This element is produced in large, aging stars from the sequential addition of three helium nuclei to a carbon nucleus. When such stars explode as supernovas, much of the magnesium is expelled into the interstellar medium where it may recycle into new star systems.

Magnesium is the eighth most abundant element in the Earth's crust and the fourth most common element in the Earth (after iron, oxygen and silicon), making up 13% of the planet's mass and a large fraction of the planet's mantle. It is the third most abundant element dissolved in seawater, after sodium and chlorine. Magnesium occurs naturally only in combination with other elements, where it almost always has a +2 oxidation state. The free element (metal) can be produced artificially, and is highly reactive.

The free metal burns with a characteristic brilliant-white light. The metal is now obtained mainly by electrolysis of magnesium salts obtained from brine, and is used primarily as a component in aluminium-magnesium alloys, sometimes called magnalium or magnelium. Magnesium is less dense than aluminium, and the alloy of the two is prized for its combination of lightness and strength.

Related Products:

Magnesium MicroPowder (Mg) -10um

Magnesium MicroPowder (Mg) - 40um

Magnesium MicroPowder (Mg) - 75um

Magnesium MicroPowder (Mg) - 100um

Magnesium MicroPowder (Mg) -800nm

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Molybdenum Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Metal machining additives, adding 1-4% nano Mo powder to stainless steel can make stainless steel improve anticorrosive capability in corrosive environments; Electron industry, mainly used in making high-power vacuum valve, heater tube, X-Ray tube, and so on; Wood machining. Catalysts; Coatings; Cutting tools; Hard alloys; High-temperature lubrication; Microelectronics films; Sintering additives.

Related Products:

Molybdenum Powder / Mo Powder (Mo, 99.9%, 500nm & 800nm, metal basis)

Molybdenum Mo Nanopowder / Mo Nanoparticles (Mo, 99.9%, 35-45 nm, metal basis)

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ag-Sn Alloy Nanopowder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :-

Silver nanoparticles are nanoparticles of silver of between 1 nm and 100 nm in size. While frequently described as being 'silver' some are composed of a large percentage of silver oxide due to their large ratio of surface to bulk silver atoms. Numerous shapes of nanoparticles can be constructed depending on the application at hand. Commonly used silver nanoparticles are spherical, but diamond, octagonal, and thin sheets are also common. Their extremely large surface area permits the coordination of a vast number of ligands. The properties of silver nanoparticles applicable to human treatments are under investigation in laboratory and animal studies.Using silver nanoparticles for catalysis has been gaining attention in recent years. Although the most common applications are for medicinal or antibacterial purposes, silver nanoparticles have been demonstrated to show catalytic redox properties for dyes, benzene, carbon monoxide, and likely other compounds. This paragraph is a general description of nanoparticle properties for catalysis; it is not exclusive to silver nanoparticles. The size of a nanoparticle greatly determines the properties that it exhibits due to various quantum effects. Additionally, the chemical environment of the nanoparticle plays a large role on the catalytic properties.The tin is used as an anode in an electrolyte solution as electrical current dissolves the tin as it moves to deposit itself on the submerged product.Tin silver solder is taking the place of other solders that may contain lead. Many applications cannot use solder that contains lead due to either water or food that may come in contact with the solder when traveling through processing pipes. Tin solder is considered PB-free as it is safer for the environment when being disposed unlike lead that can harm humans, plants, and animals.Tin silvers will also be used for electronic assemblies, such as electrical contacts, as an alternative to tin lead. Customers may also use tin silver for die attachments and thick films. With silver often used in jewelry making, tin silver will be used to solder pieces together. This jewelry process allows the piece to have a high level of brightness that is desired for an aesthetically pleasing appearance that does not look out of place due to the tin silvers brightness.

Tin silver versatility and silvery bright appearance makes it ideal for a number of applications. Whether it is for electroplating, soldering, or creating attachments, it has become the sought after metal when wanting a safer material than traditional tin lead.

Related Product :

Ni-Ti 60 nm, Ni:Ti/50:50

Sn-Cu 40-100 nm, SN:CU/9:1

Sn-Cu 40-100 nm, SN:CU/1:9

Sn-Cu 40-100 nm, SN:CU/92:8

Cu-Zn 40-100 nm, Cu:Zn/5:5

Cu-Zn 40-100 nm, Cu:Zn/6:4

Ag-Cu Nanopowder, 99.9%,

Product Name : Carbon Tape (Double Sided Adhesive)

Demension : : 8 mm (Width ) X 20m (Length )

Total Tape Thickness Without Liner 8mm, 12mm, 25mm, 50mm

Usage/Application Research & Devlopment

Description:

Carbon-fiber tape is a flat material made of carbon fiber. It weighs one-seventh as much as steel for a given strength. The carbon fiber core lasts longer than conventional steel cable. The material is resistant to wear and abrasion and, unlike steel, does not densify and stretch. It uses to make faraday's cage that protects sensitive electrical instruments from electromagnetic radiation. It acts as a replacement technology of soldering for an application that is intolerant of heat.

Why is carbon Tape used for SEM?

Because specimens in a conven- tional SEM must be electrically grounded, carbon tape has the advantage of providing both excellent adhesion and conductivity

Is carbon fiber Tape conductive?

It is a non-porous and conductive adhesive strip which is best-suited for EDX and SEM applications. These tapes are available with single-sided or double-sided carbon conductive tape

How strong is carbon fiber tape?

Carbon fiber tapes are available in Young modulus up to 436 GPa, tensile strength up to 5490 MPa and carbon density as low as 22 g/m2

What is graphite tape?

Graphite foil tape is slit and corrugated from standard purity graphite foil. 99% graphite carbon with no filler or binder. The tape is offered with an adhesive back (2020-ZH) and without (2020-Z). Special treatments for corrosion and oxidation resistance are available upon request.

Question: can this be used as a heating element in clothing?

Answer: No it is not

Question: What are the dimensions of the double sided carbon tape, 12 mm ? is it 12mm wide by xx meters long???

Answer: 12 mm width 20m long

Question: Can thus be used as a carbon heating element?

Answer: I do not think so.We use is as conductive glu

Question: do you have stock for Double Sided Carbon Tape, 8 mm 5 pcs

Answer: Thank you yes we do

Question: How long is this roll?

Answer: 20 Meters long

Question: Can this crbon fiber tape be used as a structural tape in an epoxy resin matrix?

Answer: No I am sorry it is not strong enough

Question: what is the width of the tape?

Answer: The midth is 8mm

Question: Do you sell anything *less* adhesive? i am having trouble getting my silicon chips peeled off the tape after fib processing.

Answer: Thank you have you tried the Tabs in place of the tap

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Double Sided Carbon Tape, 8mm(W) x20m(L)

Demension : : 8 mm (Width ) X20m (Length )

Total Tape Thickness Without Liner 8mm, 12mm, 25mm, 50mm

Usage/Application Research & Devlopment

Description:

Carbon-fiber tape is a flat material made of carbon fiber. It weighs one-seventh as much as steel for a given strength. The carbon fiber core lasts longer than conventional steel cable. The material is resistant to wear and abrasion and, unlike steel, does not densify and stretch. It uses to make faraday's cage that protects sensitive electrical instruments from electromagnetic radiation. It acts as a replacement technology of soldering for an application that is intolerant of heat.

Why is carbon Tape used for SEM?

Because specimens in a conven- tional SEM must be electrically grounded, carbon tape has the advantage of providing both excellent adhesion and conductivity

Is carbon fiber Tape conductive?

It is a non-porous and conductive adhesive strip which is best-suited for EDX and SEM applications. These tapes are available with single-sided or double-sided carbon conductive tape

How strong is carbon fiber tape?

Carbon fiber tapes are available in Young modulus up to 436 GPa, tensile strength up to 5490 MPa and carbon density as low as 22 g/m2

What is graphite tape?

Graphite foil tape is slit and corrugated from standard purity graphite foil. 99% graphite carbon with no filler or binder. The tape is offered with an adhesive back (2020-ZH) and without (2020-Z). Special treatments for corrosion and oxidation resistance are available upon request.

Question: can this be used as a heating element in clothing?

Answer: No it is not

Question: What are the dimensions of the double sided carbon tape, 12 mm ? is it 12mm wide by xx meters long???

Answer: 12 mm width 20m long

Question: Can thus be used as a carbon heating element?

Answer: I do not think so.We use is as conductive glu

Question: do you have stock for Double Sided Carbon Tape, 8 mm 5 pcs

Answer: Thank you yes we do

Question: How long is this roll?

Answer: 20 Meters long

Question: Can this crbon fiber tape be used as a structural tape in an epoxy resin matrix?

Answer: No I am sorry it is not strong enough

Question: what is the width of the tape?

Answer: The midth is 8mm

Question: Do you sell anything *less* adhesive? i am having trouble getting my silicon chips peeled off the tape after fib processing.

Answer: Thank you have you tried the Tabs in place of the tap

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Product Name : Single Sided Carbon Tape

Demension : : 8 mm (Width ) X20m (Length )

Total Tape Thickness Without Liner 8mm, 12mm, 25mm, 50mm

Usage/Application Research & Devlopment

Description:

Carbon-fiber tape is a flat material made of carbon fiber. It weighs one-seventh as much as steel for a given strength. The carbon fiber core lasts longer than conventional steel cable. The material is resistant to wear and abrasion and, unlike steel, does not densify and stretch. It uses to make faraday's cage that protects sensitive electrical instruments from electromagnetic radiation. It acts as a replacement technology of soldering for an application that is intolerant of heat.

Why is carbon Tape used for SEM?

Because specimens in a conven- tional SEM must be electrically grounded, carbon tape has the advantage of providing both excellent adhesion and conductivity

Is carbon fiber Tape conductive?

It is a non-porous and conductive adhesive strip which is best-suited for EDX and SEM applications. These tapes are available with single-sided or double-sided carbon conductive tape

How strong is carbon fiber tape?

Carbon fiber tapes are available in Young modulus up to 436 GPa, tensile strength up to 5490 MPa and carbon density as low as 22 g/m2

What is graphite tape?

Graphite foil tape is slit and corrugated from standard purity graphite foil. 99% graphite carbon with no filler or binder. The tape is offered with an adhesive back (2020-ZH) and without (2020-Z). Special treatments for corrosion and oxidation resistance are available upon request.

Question: can this be used as a heating element in clothing?

Answer: No it is not

Question: What are the dimensions of the double sided carbon tape, 12 mm ? is it 12mm wide by xx meters long???

Answer: 12 mm width 20m long

Question: Can thus be used as a carbon heating element?

Answer: I do not think so.We use is as conductive glu

Question: do you have stock for Double Sided Carbon Tape, 8 mm 5 pcs

Answer: Thank you yes we do

Question: How long is this roll?

Answer: 20 Meters long

Question: Can this crbon fiber tape be used as a structural tape in an epoxy resin matrix?

Answer: No I am sorry it is not strong enough

Question: what is the width of the tape?

Answer: The midth is 8mm

Question: Do you sell anything *less* adhesive? i am having trouble getting my silicon chips peeled off the tape after fib processing.

Answer: Thank you have you tried the Tabs in place of the tap

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Carbon Conductive Ink

Carbon inks were commonly made from lampblack or soot and a binding agent such as gum arabic or animal glue. The binding agent keeps carbon particles in suspension and adhered to paper. Carbon particles do not fade over time even when bleached or when in sunlight. One benefit is that carbon ink does not harm paper. Over time, the ink is chemically stable and therefore does not threaten the paper's strength. Despite these benefits, carbon ink is not ideal for permanence and ease of preservation.

Related Information

Cas No. 7440-44-0

Appearance liquid

Type Of Circuit For electro plating of non conductive materials

Purity 99%

Chemical formula C

Viscosity 15000-20000 cps

Volume Resistance0.05 max.

Temperature Range- 55 to 200 Degree C

Shelf Life 3 Months at 25 Degree C

Cured Time : 10 to 15 min

Material: Graphene Based

Storage Conditions:

Airtight sealed, Avoid light and keep dry at Room Temperature.

conductive silver ink

silver is a chemical element with the symbol ag, and atomic number 47. a soft, white, lustrous transition metal, it exhibits thea highest electrical conductivity, thermal conductivity.most silver is produced as a byproduct of copper, gold, lead, and zinc refining. silver has long been valued as a precious metal. silver metal is used in many bullion coins, sometimes alongside gold.while it is more abundant than gold, it is much less abundant as a native metal.as one of the seven metals of antiquity, silver has had an enduring role in most human cultures.

related information

cas no. 7440-22-4

appearance grey to brown liquid

purity 99%

formula: ag

viscosity + 450 to - 450 cps

drying time 90 seconds to 6 minutes at 130 degree c

hegman gauge 10.0 - 25.0 micrometer

surface resistivity : 015 ohm/square/mil

shelf life 5-6 months in unopened container

type of circuit: series circuit

storage conditions:

airtight sealed, avoid light and keep dry at room temperature.

Conductive Silver Paste

Thermal paste (also called thermal compound, thermal grease, thermal interface material (TIM), thermal gel, heat paste, heat sink compound, heat sink paste or CPU grease) is a thermally conductive chemical compound, which is commonly used as an interface between heat sinks and heat sources such as high-power semiconductor devices. The main role of thermal paste is to eliminate air gaps or spaces (which act as thermal insulation) from the interface area in order to maximize heat transfer and dissipation. Thermal paste is an example of a thermal interface material.

Related Information

Purity 99.9 %

Molecular Weight 107.87 g/mol

Resistivity 1.59 micro ohm/cm at 20 Degree C

Maximum Service Temp. 150 Degree C

Packaging Type Box

Storage Conditions:

Airtight sealed, Avoid light and keep dry at Room Temperature.

Graphite Conductive Paint

Graphite, archaically referred to as plumbago, is a crystalline form of the element carbon with its atoms arranged in a hexagonal structure. It occurs naturally in this form and is the most stable form of carbon under standard conditions. Under high pressures and temperatures it converts to diamond.

Form of Paint Liquid

Shelf life 6 months from date of shipping

Maximum service temp. 204 Degree C

Density 0.90 kg/L

Color: Iron-black to steel-gray; deep blue in transmitted light

Density: 2.092.23 g/cm3

Solubility: Soluble in molten nickel, warm chlorosulfuric acid

Storage Conditions:

Airtight sealed, Avoid light and keep dry at Room Temperature.

Product Name : Cr2GaN MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description

MAX-phase compounds with layered structure have been investigated extensively due to their excellent metallic and ceramic properties. Among them, Cr2GaC and Cr2GaN possess the same crystal structure and similar electronic structure, whereas Cr2GaN undergoes a spin-density-wave transition around 170K but Cr2GaC is Pauli paramagnetism without any magnetic transition. To understand what make these happen, we studied the crystal structure between 300 and 35K for both Cr2GaC and Cr2GaN. As the temperature decreases, the lattice constants (both a and c) decline monotonically in Cr2GaC, while an abnormal negative thermal expansion of c axis was observed below 170K in Cr2GaN. The increase of c/a induced by abnormal increase of c leads to the enhancement of localization of Cr2N plane and causes more Cr-3d electrons confinement in Cr2N plane of Cr2GaN. This further facilitates the reconstruction of density of states near the Fermi surface and even forms the Fermi surface nesting, resulting in the spin-density-wave transition as well as the abrupt changes of resistivity, specific heat, and density of carriers around 170K in Cr2GaN.

Related Product:

Cr2GaC MAX Phase Powder

Fe doped Ti3AlC2 MXene

Hf21nc MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : CrALC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description

The autonomous crack-healing capability of Cr2AlC MAX phase ceramic by surface oxidation at elevated temperatures has a huge potential for high temperature structural and protective coating applications. In this work we use time-lapse X-ray computed tomography (CT) to track the fine details of local crack filling phenomena in 3 dimensions (3D) with time. The maximum crack width that could be fully healed upon exposure to 1200 C in air is 4.8 m in 4 h and 10 m after 12 h. Furthermore, during healing Cr7C3 phase is observed beneath the dense Al2O3 layer (average thickness of 1 m on each crack surface) when the crack width exceeds 2 m. The 3D image sequences indicated that the rate of healing is essentially independent of position along, or across, the crack faces. The crack healing kinetics of Cr2AlC at 1200 C broadly follows a parabolic rate law with a rate constant of 4.6 10 m s. The microstructure, composition and thickness of the oxide scale in the healed crack area are characterized via post mortem SEM-EDS measurements and confirm the formation of an initial dense alumina layer on top of which a more porous layer forms.

Related Product:

Cobalt doped Ti3ALC2 MAX

Copper doped Ti3ALC2 MAXene

Cr2C MXene

Cr2GaC MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Hf2PbC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description

Predominantly single phase (9294 vol.%), fully dense samples of Hf2SnC, Zr2SnC, Nb2SnC, Ti2SnC, Hf2PbC and Zr2PbC were fabricated by reactively HIPing the stoichiometric mixture of the corresponding elemental powders in the 12001325C temperature range for 448 h. The latter two, fabricated here for the first time, required a further anneal of 4896 h to increase the volume fraction of ternary phases. Hf2PbC and Zr2PbC are unstable in ambient atmospheres at room temperature. As a family these compounds are good electrical conductors; the lowest and highest values of the electrical conductivities were, respectively, 2.2106 (.m)1 for Hf2SnC and 13.4106 (.m)1 for Hf2PbC. The Vickers hardness values range from 3 to 4 GPa. All compounds are readily machinable. The Young's moduli of Zr2SnC, Nb2SnC and Hf2SnC are, respectively, 178, 216 and 237 GPa. The thermal coefficients of expansion, TCE's, of the ternaries scale with those of the corresponding binaries, and are relatively low for such readily machinable solids. The lowest TCE belonged to Nb2SnC [(7.80.2)106 K1], and the highest to Ti2SnC [(100.2)106 K1]. The TCE's of Hf and Zr containing ternaries cluster around (8.20.2)106 K1. All the synthesized ternary carbides were found to dissociate into the transition metal carbide

Related Product:

Hf2SC MAX Phase Powder

Hf2SnC MAX Phase Powder

Hf2SnN MAX Phase Powder

Hf2TIC MAX Phase Powder

Mn2AIC MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Mn2GaC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

We report on first principles prediction and subsequent synthesis of Mn2GaC, a new member of the inherently nanolaminated Mn+1AXn (MAX) phase family. This phase, the first to include Mn as the sole M element, was synthesized as a heteroepitaxial thin film. The material was theoretically predicted to display magnetic ordering with ferromagnetic (FM) and antiferromagnetic configurations degenerate in energy within the computational accuracy. Vibrating sample magnetometer measurements show FM ordering with a saturation moment of ms=0.29 B per Mn atom and remanent moment of mr=0.15 B per Mn atom for temperatures230 K.

Related Product:

Mn3AlC2 MAXene Powder

Mo2C MXene Powder

Mo2Ga2C MAXene Powder

Mo2GaC MAX Phase Powder

Mo2Ti2AIC3 MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Mo2TiAlC2 MAXene Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description

Molybdenum Titanium Aluminum Carbide Mo2TiAlC2 is a ternary layered MAX phase compound of the general type Mn+1AXn, where M is a transition metal, A is an element such as aluminum or silicon, and X is either carbon or nitrogen, with n=1, 2, or 3. MAX phase compunds are precursors for the production of MXenes, novel 2D materials notable for their properties that combine aspects of both metals and ceramics. MXene from the bulk three dimensional MAX phase compound involves exfoliation or etching to selectively remove the A layer, resulting in layers which can be separated by other ions (known as intercalation) which enhances their properties. American Elements manufactures a comprehensive catalog of ultra high purity (>e;99.999%) MAX phase and MXene materials. Please request a quote above to receive pricing information based on your specifications.

Related Product:

Mo2TiC2 MXene Powder

Mo3AlC2 MAXene Powder

Mo3C2 MXene Powder

MoAlB MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Nb2PC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description

MAX phase carbides are a set of materials that have attracted the research and industrial interest due to their unique combination of metallic and ceramic properties. In recent experimental studies it was determined that Nb-based MAX phases have good mechanical and thermal properties. In the present systematic density functional theory study we examine the elastic behaviour and radiation tolerance of a range of Nb 2 AC (A = Al, Ga, Ge, In, Sn, As, P, and S) MAX phases. It is found that the Nb-based 211 MAX phases studied here are mechanically stable and elastically anisotropic. Elastically, Nb 2 GeC possesses the highest level of anisotropy and Nb 2 InC, the lowest. The cross-slip pinning process is enhanced in Nb 2 GeC that is considerably reduced in Nb 2 InC. Nb 2 GeC, Nb 2 SnC, and Nb 2 SC are ductile, whereas the other Nb-based MAX phases considered here are brittle in nature. In particular, Nb 2 GeC is highly ductile and Nb 2 AlC is more brittle. Nb 2 PC and Nb 2 SnC are respectively, more stiff and flexible under tension or compression. Nb 2 SnC has the best thermal shock resistance among the Nb-based MAX phase carbides studied here. Regarding the radiation tolerance of these MAX phases it is anticipated that Nb 2 SnC will be the most resistant to radiation.

Related Product:

Nb2SC MAX Phase Powder

Nb2SnC MAX Phase Powder

Nb2SnC MAX Phase Powder

Nb4AC3 MXene Powder

Nb4AlC3 MXene Powder

Nb4AC3 MXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Product Name : Nb21nC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description

This study demonstrates the first synthesis of MXenederived ferroelectric crystals. Specifically, highaspectratio potassium niobate (KNbO3) ferroelectric crystals is successfully synthesized using 2D Nb2C, MXene, and potassium hydroxide (KOH) as the niobium and potassium source, respectively. Material analysis confirms that a KNbO3 orthorhombic phase with Amm2 symmetry is obtained. Additionally, ferroelectricity in KNbO3 is confirmed using standard ferroelectric, dielectric, and piezoresponse force microscopy measurements. The KNbO3 crystals exhibit a saturated polarization of 21 C cm, a remnant polarization of 17 C cm, and a coercive field of 50 kV cm. This discovery illustrates that the 2D nature of MXenes can be exploited to grow ferroelectric crystals.

Related Product:

Nb2AIC MAX Phase Powder

Nb2AIC MAXene Powder

Nb2AsC MAX Phase Powder

Nb2CTx MXene Multilayer Powder

Nb2GaC MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Sc21nC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Related Product:

ScAl3C3 MAXene Powder

Spherical Ti3AlC2 MAXene Powder,

Ta2AIC MAXPhase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ta2AIC MAXene Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Related Product:

Ta2C MXene Powder

Ta2GaC MAX Phase Powder

Ta4AIC3 MAXene Powder

Ta4C3 MXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ti21nC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Related Product:

Ti21nN MAX Phase Powder

Ti2AIC MAX Phase Powder

Ti2AIN MAX Phase Powder

Ti2AIC MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ti2AIN MAXene Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Related Product:

Ti2C MXene Powder,

Ti2Cdc MAX Phase Powder

Ti2GaC MAX Phase Powder

Ti2GaN MAX Phase Powder

Ti2GeC MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ti2N MXene Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Related Product:

Ti2NPbC MAX Phase Powder

Ti2SC MAX Phase Powder

Ti2SiC MAX Phase Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ti2SnC MAX Phase Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Related Product:

Ti2SnC MAXene Powder,

Ti2TIC MAX Phase Powder,

Ti2TIC MAX Phase Powder

Ti3AIC2 MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Ti3C2Tx MXene multilayer water Dispersion

Related Product:

Ti3C2Tx MXene Thin Layer

Ti3CN MXene Powder

Ti3GeC2 MAXene Powder

Ti3SiC2 MAXene Powder

Ti4AIN3 MAXene Powder

Ti3C2 MXene Powder

TiVAIC MAXene Powder

Tugsten doped Ti3AIC2 MAXene Powder

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Please contact us for customization & Price inquiry

Product Name : Single Crystal Silicon Wafer P/N Type 4 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Boron as a dopant

Type of surface: Single-sided polished

Diameter and thickness: D* = 4 inch and thickness =52520 m

Semiconductor properties:

Physical properties: Resistivity: 10 -cm

Product Name : Single Crystal Silicon Wafer P/N Type 3 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

(Orientation):

Type of surface: Single sided polished

Diameter: D* = 3 inch

Thickness = 0.5mm

Semiconductor properties (Orientation):

Resistivity: < 5-10 -cm

Product Name : Single Crystal Silicon Wafer P/N Type 4 inch (Dia)

Silicon Wafer ( N-type/Dopant - Phos. )

Type of surface: Single sided polished

Diameter: D* = 4 inch

Thickness = 52520 m

Semiconductor properties (Orientation):

Resistivity: < 10-20 -cm

Product Name : Single Crystal Silicon Wafer P/N Type 2 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Silicon Wafer

Grade Prime (Si+Sio2 (wet))

Diameter: D* = 2 inch

Type & Dopant: P Boron

Orientation :

Resistivity: 01-10 -cm

Polished: Single Side polished

Thickness = 380 25 m

Coating Thickness 300 nm

Product Name : Single Crystal Silicon Wafer P/N Type 3 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Grade Prime (Si+Sio2 (wet))

Diameter: D* = 3 inch

Type & Dopant: N phosphorous/Boron

Orientation:

Resistivity: 01-10 -cm

Polished: Single Side polished

Thickness = 380 25 m

Coating Thickness 300 nm

Product Name : Single Crystal Silicon Wafer P/N Type 6 inch (Dia)

Pack Size : 5 Pcs, 10 Pcs, 20 Pcs

Silicon Wafer ( P/N-Type )

Grade Prime (Si+Sio2 (wet))

Diameter: D* = 6 inch

Type & Dopant: N phosphorous/Boron

Orientation:

Resistivity: 01-10 -cm

Polished: Single Side polished

Thickness = 380 25 m

Coating Thickness 300 nm

Description:-

Silicon wafers are available in a variety of sizes ranging from (1 inch) to (6 inches).We want to laser cut the wafer to create a substrate for a microfluidic device and produce thin silicon discs used every month to make products such as integrated circuits and high-performance electronics.This will experience a slight decline due to the fall in silicon prices and the falling demand for the product, Silicon wafer suppliers can be time consuming and difficult to find The best polished Silicon Wafer deals are obtained directly from their suppliers. A wafer is a thin piece of semiconductor material, normally silicon crystal. These wafers are used to fabricate integrated circuits and other micro devices. Silicon wafers are available in a variety of sizes ranging from (1 inch) to (6 inches).

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Product Name : Carbon Coated TEM Grid

The grids used in TEM microscopes to place specimens are usually made of copper with a mesh size of about 3 mm and a layer of plastic called a formvar and a thin film of carbon.When the samples are placed on the coated grids, the uniformity of the sample layer is one of the important points for proper imaging of biomolecular complex in aqueous solution. For this purpose, it is necessary that the surface in contact with the biological sample, in addition to being hydrophilic, is completely free of contamination. The layer commonly considered as supporting layer is a few nanometer thin film of amorphous carbon. This thin film absorbs the particles across the holes in the grids used in TEM imaging and minimizes the effect of the support in TEM images.

Unfortunately, the grids used in TEM are hydrophobic after carbon coating. This causes the orientation and concentration of the particles in different holes of grid to be different and the sample not to be uniformly placed on the supporting grid. As a result, the surface needs to be treated before placing the combination of biomolecules and water to spread the sample with minimum thickness on it. Hydrophilicity and hydrophobicity of a surface means how water interacts with that surface. If water beads up into droplets and does not spread evenly across the surface, is hydrophobic. On hydrophobic surfaces, the contact angle of water droplets with the surface is large. In contrast, if a drop of water that is placed on the surface is evenly distributed and has a small contact angle with the surface; it is called a hydrophilic surface. The usual way to increase the hydrophilicity of the TEM grids is to place them in a low power oxygen or argon plasma environment.

Portable Yes

Magnification 1000 X

Model SCM -006

Colour Black

Shape Round

Mesh size 100, 200, 300, 400

Application TEM

Minimum Order Quantity 1 Pack (Pack of 25 Pcs, ), (Pack of 50 Pcs, )

Usage/Application : Scientific Research

Specifications:

Extensive Range of Grids for TEM applications

Square, Hexagonal, Rectangular, Parallel, Slot & Round Mesh Shapes

Finder and folding Grids

Sizes Range : 50, 75, 150, 200, 300 and 400, 600, 700, 1000, 1500 and 2000 Mesh

Carbon, Copper, Nickel, Gold, gilded and platinized

Special Metals: Aluminum, Molybdenum, Stainless Steel & Titanium

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Copper Coated TEM Grid

A TEM grid is typically a flat disc with a mesh or other shaped holes used to support thin sections of specimen. The holes in the grids allow the electrons to pass through. Grids are available in a wide variety of patterns and materials for various applications. In general, 200-400 mesh (lines/in) grids are used in TEM experiments. Most EM grids are made of copperbecause it is non-ferromagnetic and thus minimally distorts the magnetic field of the objective lens

Portable Yes

Magnification 1000 X

Model SCM -006

Colour Gray

Shape Round

Mesh size 100, 200, 300, 400 Mesh

Application TEM

Minimum Order Quantity 1 Pack (Pack of 25 Pcs, ), (Pack of 50 Pcs, )

Usage/Application : Scientific Research

Specifications:

Extensive Range of Grids for TEM applications

Square, Hexagonal, Rectangular, Parallel, Slot & Round Mesh Shapes

Finder and folding Grids

Sizes Range : 50, 75, 150, 200, 300 and 400, 600, 700, 1000, 1500 and 2000 Mesh

Carbon, Copper, Nickel, Gold, gilded and platinized

Special Metals: Aluminum, Molybdenum, Stainless Steel & Titanium

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Aluminum Borohydride Micro powder

Aluminum Borohydride is produced by the reaction between sodium borohydride with aluminium chloride. The explosive liquid ignites suddenly in air and reacts dynamically with water to form hydrogen, used mainly in organic synthesis. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. Aluminum Borohydride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: 16962-07-5

Appearance colorless liquid

APS 1-5m (Can be Customized)

Purity 99%

Chemical formula H18AlB3

Molar mass 71.51 g mol-1

Density N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Note : We supply different size ranges of Lab, R&D Materials as per requirements and send e-mail soodchemicals@gmail.com, soodsalespurchase@gmail.com for any inqury & technical qus, Official quotation.

Product Name : Calcium Hydride Micropowder

Calcium Hydride is generally immediately available in most volumes. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: 7789-78-8

Appearance White Powder

APS 1-5 Micron (Can be Customized)

Purity 99%

Chemical formula CaH2

Molar mass 42.09

Density N/A

Melting Point : N/A

Boiling Point : N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

product name : polyvinylidene fluoride micro powder

pack size : 50 grams , 100 grams , 500 gram, 1000 gram ,

product description

polyvinylidene fluoride (pvdf), also known as polyvinylidene difluoride and pvf2, is part of the fluoropolymers family; a group of specialised, versatile polymeric materials with distinct properties that result from the strong bond between their carbon atoms and fluorine atoms and the fluorine shielding of the carbon backbone. pvdf is a specialty polymer with pyroelectric and piezoelectric properties and is used in the manufacturing of diverse high-purity, high-strength, and high-chemical-resistance products for applications in electrical, electronic, biomedical, construction, fluid-systems, oil-and-gas.electrical and electronic industrial wire, cable coating, sleeve, heat shrinkable tube, bobbin, wiring board, printed circuit board, wire harness device, anode shield, high dielectric constant capacitor film and electric heating band, optical fiber sheath or outer coating, etc. because the dielectric loss of polyvinylidene fluoride is larger, especially suitable for low voltage electrical insulation. good processing strength, flexibility, easy processing, good transparency, easy coloring, so it is an excellent insulation material for low voltage electrical products. after unidirectional stretching and polarization treatment of polyvinylidene fluoride, it can change the vibration energy into electrical energy, and can also change the electrical energy into vibration energy. in addition, good processing, can be processed into a variety of free shapes, its application scope is expanding, has been applied to the piezoelectric film audio components, such as 1020khz speakers, microphones, headphones, telephones, etc; such as> 20khz, up to 900mhz probe, microphone, ultrasonic microscope and ultrasonic air, etc.; measurement of vibration meter, pressure gauge, accelerometer, etc.; medical sphygmomanometer and palpation device; thermoelectric film has been used in radiation thermometer, infrared sensor, millimeter wave detector, radiation energy detector, laser energy detector; fire detector and anti-theft detector.

related information :

storage conditions:

airtight sealed, avoid light, and keep dry at room temperature.

suggest equipment

eyeshields, gloves, type n95 (us), type p1 (en143) respirator filter

Product Name : Gold Coated Tem Grids

Lacey carbon films are similar to the holey carbon films in that they have open areas but because of the fine lacey mesh structure they offer a greater percentage of open area in comparison (see micrograph). They provide the thinnest possible support film while maintaining adequate strength and give practically no background interference in the TEM. As much of the specimen is unsupported, these films are appropriate for use where a structure free background is of importance. Lacey carbon films are particularly suitable for studying some nanotubes, acicular crystals and biological/materials specimens.

Portable Yes

Magnification 1000 X

Model SCM -012