Sonitech India Private Limited

Kasna, Greater Noida, Uttar Pradesh

We are identified as one of the most reputed Refrigerated Compressed Air Dryer Manufacturers and Suppliers, based in the Capital City of India. We provide Refrigerated Air Dryers Using Freon Gas. The superior Refrigerated Air Dryer System provided by us is extremely effective to purify impure compressed air that contains dust, oil, and moisture.

AIR Drying : These are two basic modes of removal of moisture (drying of air) from compressed air:

• Adsorption drying.
• Refrigeration drying.

adsoption drying works on basic principle of mass transfer i.e. adsorption of moisture from compressed air by desiccant like Silica Gel, Activated Alumina or Molecular Sieves. These types of air dryers are economical when extremely dry air having atmoshpheric dew point of -40^oC or lower is required. On the other hand, Refrigerated air dryer works on the principle of cooling down air to_3^oC by a suitable refrigerant like freon, NH₃ Etc. Refrigerated dryers are the best choice for instrument-air applications. SONITECH has expertise in design and manufacture of both the above types of air dryer and depending upon the ultimate use, we can offer suitable dryer, duly selected and designed to meet your specific need.

HOW A REFRIGERANT AIR DRYER WORKS :Enclosed engineering line diagram illustraes the operation of typical SONITECh refrigerated air dryer circuit can be divided into two parts :

• Air circuits
• Refrigerant circuit.

Air circuit :The hot moist air and oil vapour from an air compressor enters into precooler-Reheater (1), where it is pre-cooled by the outgoing cool air, Precooling enhances maximum efficiency of the reRefrigeration unit. This pre-cooled air then enters into an EVoporator(2)and is cooled to +3^oC. Moisture and oil vapour are condenced in this Evaporator. Cooled air is then passed throught a moisture seperator(3) and Condenced liquids are drained out by automatic drain(4). From the seperator, the cold dry and pure air flow through the Pr_cooler-Reheater and is reheated by the incoming air. Reheateing increase the volume of air, prevents sweating and lowers the relative humidity of the air. This clean dry air is then available for use. Refrigerant circuit :Cold liquid refrigerant absorbs heat from hot compressed air in the Evaporator. As a result, the refrigerant changes its phase from liquid to vapour. Vapourous refrigerant (cold) flow into the Refrigerant compressor (5). The compressor compresses cold, low pressure vapour to hot, high pressure vapour. AIt then flows through the Condenser (6) and is cooled, forming a liquid of nearly ambient temprature. Liquid refrigerant is then collected in a reciever. From there the liquid refrigerant is then collected in a reciever. from there, the liquid refrigerant flows into the expansion valve(7) through a filter dryer. The filter dryer filters the refrigerant and removes any traces of moisture and contaminants which may have been introduced during the cherging of the condensing unit. the expansion valve lowers the pressure and onsequently the saturation point of the liquid refrigerant. This liquid refrigerant absorbs heat from the air being dried and begins to change its phase back to vapour.

Click here for Water Content Conversion Chart

• Optimises resource efficiency
• Capacity: Upto 5000 cfm
• Drying is executed via cooling the air (RAD)/ passing through Desiccants (HAD)
• For volume flows of even as less as 10 cfm, our refrigerated dryer functions as a cycling dryer whereby the refrigerant compressor is switched off and on, based on demand
• The intelligent cycling system is executed depending on the drying requirement and is regulated in such a way that the switch-off times can be optimally extended
• Our desiccant dryers adsorb moisture from the air stream and onto a desiccant material in a reversible process.
• They produce low dew points (up to -70 degree Celsius)
• Desiccants used: Activated Alumina, Activated Carbon and Molecular Sieves.

We offer Desiccant Air Dryer Using Alumina/Molecular Sieve. We are distinguished in the Industry as one of the most popular Desiccant Compressed Air Dryer Manufacturers and Suppliers in the country. Our Desiccant Air Dryer System is used to purify the harmful air that comprises moisture, oil, dust, and grimes.

Our desiccant dryers adsorb moisture from the air stream and onto a desiccant material in a reversible process. They produce low dew points (up to -70 degree Celsius), so they are a good choice when processes require extremely dry air in industries like pharma, paint, biotech laboratories etc.

Desiccants used: Activated Alumina, Activated Carbon and Molecular Sieves.

Capacity: Upto 5000 cfm

USP:

Designed with 5 Tanks

Sonitech refrigerated dryer system represents optimized  resource efficiency. The drying is executed via cooling the  air.

For volume flows of  even as less as 10 cfm, our  refrigerated dryer functions as a cycling dryer whereby the  refrigerant compressor is switched off and on, based on  demand. 

The intelligent cycling system is executed  depending on the drying requirement and is regulated in  such a way that the switch-off times can be optimally  extended.

Our desiccant dryers adsorb moisture from the  air stream and onto a desiccant material in a  reversible process. They produce low dew  points (up to -70 degree Celsius).

They are a  good choice when processes require extremely  dry air in industries like pharma, paint, biotech  laboratories etc.

Desiccants used: Activated Alumina, Activated

Carbon and Molecular Sieves.