Post Buy Requirement
SI
Chennai, Tamil nadu, India
Verified Add Review

Testing Equipment #5525040

Our Complete range of products are earth testers, Insulation Tester, ac high voltage breakdown tester, Continuity Tester and Low Voltage Tester.

Earth Testers

Earth testers, MRU-200-GPS is the only meter in the market which uses all measurement methods. Possible measurements: earth resistance measurment with 2-pole, 3-pole, 4-pole method, impulse earth impedance measurement, three kinds of measuring impulse 410s, 820s, 10350s, earth resistance measurement without disconnecting measured earths (using clamp), two clamps earth.
View Complete Details

Insulation Tester

  • Dimensions 200 x 180 x 77 mm
  • Weight 0, 9 kg
  • Measurement results memory 990 cells, 11880 records
Insulation tester, 2.5kv Insulation Tester measurement:selectable measurement voltage in the 1002500 V range with 100 V step, continuous indication of 2.5kv insulation resistance or leakage current, automatic discharge of capacitance of tested object after the insulation resistance measurement, acoustic signalling of five-second periods to facilitate obtaining time characteristics,
View Complete Details

Ac High Voltage Breakdown Tester

  • Highest power consumption, kVA, max 2
  • Weight, kg, max 40
  • Dimensions, mm, max 600 × 380 × 310
Ac high voltage breakdown tester, Universal insulation breakdown tester UPU-10 is designed for testing the insulation properties of the electrical equipment with an AC sinusoidal voltage of 50 Hz frequency. Due to the high output current, UPU-10 can also be used for testing the insulation braiding of large electric machinery with AC voltage.
View Complete Details

Continuity Tester

  • Accuracy (AC) ±(3% m.v. +4 digits)
  • Range 0…1999 Ω
Continuity tester, P-3 can effectively check phase detection, and could be used for resistance measurement & circuit continuity tests. P-3 Voltage and continuity tester functionality includes: ACDC voltage measurement and indicationResistance measurement and circuit continuity testingIndication of phase rotationSingle pole testing for phase detectionRCD testingIdentification and adjustment of phase
View Complete Details

Low Voltage Tester

  • Dimensions, mm, max 430х620х500
  • Net weight, kg, max 90
Low voltage tester, Cable test van ETL-35K is a combination of testing equipment mounted in a van and designed to perform the following: High-voltage testing with AC voltage of up to 50 kV;High-voltage testing with DC voltage of up to 60 kV;Burning the defective insulation of cables and its further aftreburing;Determining the distance to the fault with Time Domain Reflectometer RIF-9;Finding cable faults using the induction method with the audio-frequency generator GZCH-2500 and the surge wave locator set P-900;Finding cable faults using acoustic method with the acoustic generator GAUV-32 and the surge wave locator set P-900;Measuring the parameters of power transformers using the low-voltage tester BNI;Determining the capacitance and dissipation factor of electrical facilities with voltages of up to 10 kV.
View Complete Details

Power Supply Testers

  • Display Graphic LCD 5, 6′,
  • Weight of the meter approx. 5, 6 kg,
Power supply testers, 10KV Insulation Tester Insulation resistance measurement:up to 40 T measurement voltage any in the range of: 5010000 V (501000 V at 10 V and 110 kV at 25 V), continuous indication of measured insulation resistance or leakage current, MIC-10s1 Stable measurements in noisy environments such as 765 kV substations.Graphic LCD 5, 6 backlit.Keyboard backlit.Power supply from battery packs.Built-in fast charger.The instruments meet the requirements of the EN 61557 standard.
View Complete Details

Ground Resistance Testers

  • LCD display Graphic, backlighted
  • Interface USB
  • Storage temperature -20…+70°C
Ground resistance testers, MRU-200 is the only meter in the market which uses all measurement methods. Possible measurements:earth resistance measurment with 2-pole, 3-pole, 4-pole method, impulse earth impedance measurement, three kinds of measuring impulse 410s, 820s, 10350s, earth resistance measurement without disconnecting measured earths (using clamp), two clamps earth resistance measurement without auxiliary test probs, earth resistivity measurement, continuity measurement, leakage current measurement.
View Complete Details

Leakage Current Tester

  • Dimensions 125 x 150 x 95 mm.
  • Reference temperature 23 ±2 ˚C.
  • Frequency 50Hz or 60Hz
Leakage current tester, MPU-1 is dedicated to control (measure) leakage current in AC, low and medium voltage power networks. It is designed to make measurements, which results define networks safety condition for leakage current. The device enables to set limit for maximum safe value of flowing leakage current and for values above this limit visual and sound alarm is activated.
View Complete Details

Voltage Tester

  • Frequency, Hz 50 ± 2
  • High Voltage Unit dimensions, mm, max 360 × 500 × 310
  • High Voltage Unit weight, kg, max 35
Voltage tester, High Voltage Tester HVT-7050 perform DC high-voltage testing of power cables (IEC 60502-2) up to 70 kV, power cables accessories (IEC 61442) as well as AC high-voltage testing, up to 50 kV at 50 Hz, of switchgear, reclosers, dielectric insulators, highvoltage dischargers (arresters), busbars and other dielectric materials with relatively low electric capacitance.
View Complete Details

Low Resistance Measurement Meter

  • Accuracy 10%
  • Brand Name Sonel
  • Item Code MMR620
  • Display LCD
  • Model 620
  • Usage Industrial
View Complete Details

Light Meters

  • Brand Name Sonel
  • Item Code LXP-2
  • Accuracy 2%
  • Model 2
  • Resolution 0.1 Lux
  • Display LCD
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us