Dehradun, Uttarakhand, India
GST : 05AGEPS6062L1Z2
Verified
Add Review
Our Product / Services
Plastic & Powder Coatings
2 Products availableFlooring Services
1 Services availableWall Painting Services
1 Services availableGardening Services
1 Services availableWaterproofing Services
1 Services availableWe are leaders in the market for providing best range of Rain Crete
Terrace Garden Services offered are handled by experts who have with them rich and extensive experience in developing patch of greenery in available terrace spaces. The These are developed in contemporary designs that add richness to the garden and landscape. Some of its features include suitable for development in urban areas support enhancement in looks, meeting temperature control needs of interior spaces, offering superior architectural enhancement among others. Some of the service features include providing for ecological benefits; gardens support reducing overall heat absorption of building, thus decreasing of energy consumption.
Rain Guard Liquid Rubber is a Liquid applied elastomeric membrane coating based on urethane pre polymers. Rain Guard Liquid Rubber when applied on a surface , gives a continuous monolithic film which is rubbery and elastic in nature. The film is self curing and cures by reaction with atmospheric moisture.Rain Guard Liquid Rubber is black in color.
By virtue of its chemical reactivity in the wet state , has good adhesion to a wide range of substrates such as concrete, brick, wood, slates, tiles, glass and metals etc. Unlike more traditional bitumen based products, Rain Guard Liquid Rubber is highly resistant to extreme weather conditions, and is not adversely affected by extreme temperature conditions. Rain Guard Liquid Rubber does not flow at thigh ambient temperature and does not crack at low temperature.
Rain Guard Liquid Rubber is membrane coating and as such waterproofing protection is achieved only with film thickness i.e 1 mm minimum. It is essential to achieve this thickness. Although membrane can be applied in single coat 1mm, however it is recommended to apply two Coats of 0.5 mm each to avoid uneven surface, thin patches, joints, missed areas or pin hole .Apply second coat when the first layer is sufficiently cured to allow access to the operator.
Application Procedure :
Features
Health And Safety
Specifications
| Characteristics | Values |
|---|---|
| Specific Gravity | 1.18 |
| Solids | 95 % min |
| Abel Closed Cup Flah Point | 56 degree C |
| Approximate dry Time | 24-48 Hours |
| Elongation | 1000 |
| Tensile Strength | 2.07 MN/m2 |
| Accelerated Weathering | No appreciate deterioration after 12,000 hours |
| UV Resistance | Excellent |
| Storage Stability | 9 Months |
Rain Crete is an SBR based polymer modified cementitious water proofing system. The Rain Crete polymer , when mixed with cement will provide the unique solution to all problems related to water leakage and it protects from severe fungus , salt penetration, or environmental attack in the following structures.
When mix with the cement , will provide better adhesive properties, impact resistance, flexural strength, and thin section fragility when compared with ordinary cement mortar.
Product Features
How to WorksIt is well accepted fact that the damage skin or flesh of human body is only replaced with the skin or flesh of similar body. Likewise damaged cementations concrete or mortar should always be replaced by same kind of material. But cement particularly is having poor adhesive properties, low flexural and impact strength and mainly thin section fragility. Addition of acrylic polymer RAIN CRETE into cement acts as a bonding agent and forms a hard impermeable film which prevents not only water and fume but also allow the structure to breathe. This film , unlike all other existing conventional materials is flexible enough to take care of the thermal movement of structure and protects from severe attacks during all seasons.
Surface PreparationThe area to be coated must be sound clean, and free from oils, grease, or any other surface contaminates. Remove any loose material by scraping, chipping, mechanical abrasion Or any other suitable method. Visible cracks or any porous substrate are to be filled or lavelled by using filler. The prepared surface is to be adequately saturated with water atleast one hour before application, but leave no puddle of water. Cleanning of salt attacked area can be thoroughly washed Muretic acid followed by copious water till neutral to litmus. Excellent surface preparation will ensure superior water proofing, excellent bonding & economic coverage.
MixingTake 1 part by weight of RAIN CRETE into a clean container and then add gradually 2 parts by weight of fresh cement under continuous mixing till a lump free pintable consistency is achieved. NEVER ADD LIQUID INTO THE CEMENT.
ApplicationThe slurry made by the above method is to be applied by a wide flat brush or broom across the prepared area uniformly. Apply the second coat of the freshly mixed slurry soon after the first coat is air dried sufficiantly (Normally 3 to 6 hours ) . Stirr frequently during use to offset settlement. NEVER USE A PREPARED SLURRY MORE THAN 30 MINUTES OLD.
CuringRain Crete composite slurry system does not require continuous wet curing or ponding but it is recommended only after 24 hours of final coat application sprinkling of water or a cover with a plastic sheet to minimize the rapid surface drying due to heat or air drying for next three days.
Important NoteTwo or more coat of Rain Crete composite slurry are always recommended for longer durability & effective water proofness.The above systems are generally forms a hard and flexible film. To protect the film for a longer period ( in case of roof slab or pedestrian movement areas) , it is always advisable to lay a thin section of lean concrete with proper slope.
PrecautionsDuring initial curing surface should be protected from traffic, abrasion, rains etc.During wet curing surface should not be left dry at any point of time.
Typical Properties
We at Sondhi Enterprises are Waterproofing Experts, consultants , Applicators, distributors & Brand Owner Of Rain Guard Provide Solution For All Kind Of Waterproofing Treatments For Roof, Wall, Basement, Terrace Garden, Swimming Pool, Water Tanks Along With Epoxy Flooring.
