0.25 HP to 2.0 HP motors are available in 1.ph & 3.ph and also available high speed and low speed.Internal fly wheel, bearing, clutch cork, frame and bracket are extra heavy duty and made out of the highest quality material. This means Sonal clutch motors last longer. Sonal motors extra torque allows for faster starts.Sonal motors feature built-in light taps, vibration free rotation, low temperature rise. Every motor is tested by penal board. Single phase, 220 110 volt & Three Phase, 120 220380440 volts, motors come with switch. All motors come with your choice size of pulley.

Neat cutting, small-curvature radius curvillinear cutting.Low noise, stable running, easy to operate and high efficiency.Incorporated with an auto knife-grinding device, easier to operate, Suitable for mass trimming cotton, woollen, linen leather and chemical fibre goods, all type of cloth, etc.

Three Phase Motors

The technical specifications are advanced. So the motors are characterized with high quality and reliable performance. They are always applied to series of small machine tools, medical machine and scientific instruments etc. Meanwhile, Sonal Motors are available in International standard frame sizes. Built in robust grey cast iron housings dynamically balanced rotors and accurate control on the uniformity of the air gap minimize vibration and ensure low vibration levels. They are available in a wide range from 0.12 to 50 HP. They enjoy good fame in abroad and domestic market for their wonderful performance.

Salient features of TEFC Standard Motors

• Sonal motors can be continuously overloaded by 10% or can be used up to ambient temperature of 50C. Temperature rise will be as per Class F limits
• All motors are with degree of protection IP55
• All motors up to 200L frame are designed for 50C ambient
• 2Z Bearings are standard up to 180L frame which are filled with high temperature grease suitable up to 140C
• Terminal boxes are large and can be rotated in steps of 90
• Rotors are dynamically balanced with half key
• All foot mounted motors are with integral cast feet
• Outer bearing covers are integral with end shield / flange
• Additional anti tracking protective coating of air drying varnish is applied on the winding overhangs
• Cooling fans are of aerodynamic design resulting in low noise and are bi-directional
• Standard Motors are suitable for mounting with any shaft orientation

High Quality Features

Suitable for mass trimming cotton, woollen, linen leather and chemical fibre goods, etc.

• Neat cutting, small-curvature radius curvillinear cutting.
• Low noise, stable running, easy to operate and high efficiency.
• Incorporated with an auto knife-grinding device, easier to operate

Suitable for mass trimming cotton, woollen, linen leather and chemical fibre goods, all type of cloth, etc.

Neat cutting, small-curvature radius curvillinear cutting. Low noise, stable running, easy to operate and high efficiency.Incorporated with an auto knife-grinding device, easier to operate.Working cutting Opration essyly because of machine body strucher made by aluminum dai cast&Plastic mould parts,

Specification

• Knife size : 100mm / 110mm
• Knife Shape : Octagon*
• Cutting capacity : 25mm(1) & 35mm(1.5)
• Volts : single phase : 100V-120V, 220V-240V
• Power : 100W
• Net Weight : 2.900 Kg
• Gross Weight : 3.600 Kg

Exhaust Fan, Pedestal Fan, Wall Mounted Fan

SONAL MACHINE TOOLSare a known manufacturer and supplier of Exhaust Fans. We have on offer for our customers premium quality Three Phase & Single Phase Exhaust Fans. These exhaust fans are manufactured using premium quality raw material and coated with epoxy polyester powder. The exhaust fans offered by us are low maintenance, cost-effective, reliable and have a long functional life. Our exhaust fans are international quality standards and are known to effectively cool, circulate as well as ventilate air. These qualitative exhaust fans are extensively utilized in numerous storage facilities, factories, gymnasiums, greenhouses and barns.

In order to ensure premium quality exhaust fans, we conduct rigorous quality tests during various stages of production so that the finished products comply with international standards. We have hired industry experts who look after the entire production process and ensure streamlined business operations. Further, the manufacturing facility of our firm is equipped with requisite machinery and equipment that enable us to carry out production process in an efficient manner. By maintaining quality throughout the working career, we are able to generate goodwill in the market

0.25 HP to 2.0 HP motors are available in 1.ph & 3.ph and also available high speed and low speed.Internal fly wheel, bearing, clutch cork, frame and bracket are extra heavy duty and made out of the highest quality material. This means Sonal clutch motors last longer. Sonal motors extra torque allows for faster starts.Sonal motors feature built-in light taps, vibration free rotation, low temperature rise. Every motor is tested by penal board. Single phase, 220 110 volt & Three Phase, 120 220380440 volts, motors come with switch. All motors come with your choice size of pulley.

Neat cutting, small-curvature radius curvillinear cutting.Low noise, stable running, easy to operate and high efficiency.Incorporated with an auto knife-grinding device, easier to operate, Suitable for mass trimming cotton, woollen, linen leather and chemical fibre goods, all type of cloth, etc.

Three Phase Motors

The technical specifications are advanced. So the motors are characterized with high quality and reliable performance. They are always applied to series of small machine tools, medical machine and scientific instruments etc. Meanwhile, Sonal Motors are available in International standard frame sizes. Built in robust grey cast iron housings dynamically balanced rotors and accurate control on the uniformity of the air gap minimize vibration and ensure low vibration levels. They are available in a wide range from 0.12 to 50 HP. They enjoy good fame in abroad and domestic market for their wonderful performance.

Salient features of TEFC Standard Motors

• Sonal motors can be continuously overloaded by 10% or can be used up to ambient temperature of 50C. Temperature rise will be as per Class F limits
• All motors are with degree of protection IP55
• All motors up to 200L frame are designed for 50C ambient
• 2Z Bearings are standard up to 180L frame which are filled with high temperature grease suitable up to 140C
• Terminal boxes are large and can be rotated in steps of 90
• Rotors are dynamically balanced with half key
• All foot mounted motors are with integral cast feet
• Outer bearing covers are integral with end shield / flange
• Additional anti tracking protective coating of air drying varnish is applied on the winding overhangs
• Cooling fans are of aerodynamic design resulting in low noise and are bi-directional
• Standard Motors are suitable for mounting with any shaft orientation

High Quality Features

Suitable for mass trimming cotton, woollen, linen leather and chemical fibre goods, etc.

• Neat cutting, small-curvature radius curvillinear cutting.
• Low noise, stable running, easy to operate and high efficiency.
• Incorporated with an auto knife-grinding device, easier to operate

Suitable for mass trimming cotton, woollen, linen leather and chemical fibre goods, all type of cloth, etc.

Neat cutting, small-curvature radius curvillinear cutting. Low noise, stable running, easy to operate and high efficiency.Incorporated with an auto knife-grinding device, easier to operate.Working cutting Opration essyly because of machine body strucher made by aluminum dai cast&Plastic mould parts,

Specification

• Knife size : 100mm / 110mm
• Knife Shape : Octagon*
• Cutting capacity : 25mm(1) & 35mm(1.5)
• Volts : single phase : 100V-120V, 220V-240V
• Power : 100W
• Net Weight : 2.900 Kg
• Gross Weight : 3.600 Kg

Exhaust Fan, Pedestal Fan, Wall Mounted Fan

SONAL MACHINE TOOLSare a known manufacturer and supplier of Exhaust Fans. We have on offer for our customers premium quality Three Phase & Single Phase Exhaust Fans. These exhaust fans are manufactured using premium quality raw material and coated with epoxy polyester powder. The exhaust fans offered by us are low maintenance, cost-effective, reliable and have a long functional life. Our exhaust fans are international quality standards and are known to effectively cool, circulate as well as ventilate air. These qualitative exhaust fans are extensively utilized in numerous storage facilities, factories, gymnasiums, greenhouses and barns.

In order to ensure premium quality exhaust fans, we conduct rigorous quality tests during various stages of production so that the finished products comply with international standards. We have hired industry experts who look after the entire production process and ensure streamlined business operations. Further, the manufacturing facility of our firm is equipped with requisite machinery and equipment that enable us to carry out production process in an efficient manner. By maintaining quality throughout the working career, we are able to generate goodwill in the market