We are offering vibration motor.Three phase input voltage: standard executions 50hz 220-230380-400v , 60hz 220-240440-480v , standard: 2 poles:- 30003600 rpm - 5060hz, 4 poles:- 15001800 rpm - 5060hz, 6 poles:- 10001200 rpm - 5060hz special input voltages available on request.

VIBRATORS MOTORS to meet the requirement of various industries where in material handling plays a major role. These vibrators help to empty, dose, convey, loosen, test, clean, screen, compact, distribute, feed etc., & therefore have a very wide application in Mining, Fertilizer, Chemical, Parma & Food Industry etc Sonal-FOOT BASE VIBRATORS MOTOR vibrators Motors are robust, reliable, highly loadable, quite running and require no maintenance are totally enclosed, surface cooled units operating 415 440 volts, 3 phases, 50 cycles. A.C. Supply. Generously dimensioned cylindrical roller bearing, self-lubricating maintenance-free, long life expectancy. The vibrating frequency depends on the revolutions of the rotary unit & can be chosen from four ranges available via, frequencies are 3000, 1500, 1000, 750 vibrations per minute. When used as a single unit, they impact circular vibrations. If directional vibrations are needed, two vibrators running in the opposite direction should be use. The Centrifuge force can be adjusted from zero to maximum by manipulating the relative positions of the eccentric weights provided on either side of the shaft. Various models are available giving a wide choice of Centrifugal force, frequency of vibration, mounting position, Insulation etc. The customer is therefore assured of getting the most suitable vibrator to meet these requirements.

Single Phase Motors are used in variety of applications in households and small industrial sectors, where three phase power supply is not available. Single Phase motors are classified based on the type of starting mechanism. Widely used starting mechanisms are Split Phase Capacitor Start and Run Capacitor Start Induction Run & Capacitor Start Capacitor Run. Depending upon the application load characteristics, mounting suitability and cooling mechanisms, we have single phase motors in various output powers, constructions and enclosures in the product categories given below. We offer custom made motors to suit every existing and emerging application requirements in segments of domestic applications, farm equipments, medical & healthcare equipment, industrial and construction equipment. Motors are designed for specific applications in as per customer requirement by considering following major aspects.

Single Phase Motors are used in variety of applications in households and small industrial sectors, where three phase power supply is not available. Single Phase motors are classified based on the type of starting mechanism. Widely used starting mechanisms are Split Phase Capacitor Start and Run Capacitor Start Induction Run & Capacitor Start Capacitor Run. Depending upon the application load characteristics, mounting suitability and cooling mechanisms, we have single phase motors in various output powers, constructions and enclosures in the product categories given below. We offer custom made motors to suit every existing and emerging application requirements in segments of domestic applications, farm equipments, medical & healthcare equipment, industrial and construction equipment. Motors are designed for specific applications in as per customer requirement by considering following major aspects.

• 0.25 H.P. to 3.0 H.P. Motors are available.
• Motors are available in cast iron body and also in metal body.
• Models Available in 220V/110V, 60Hz
• Load conditions: - Output, speed, duty cycle and Noise levels.
• Field Conditions: - Supply conditions, temperature, humidity, vibration levels, dust / water Ingress etc.
• Class F insulation with Class B Temperature Rise Design
• High Efficiency, Long life motors
• Heavy Duty, Ball Bearing.
• High Starting Torque, Low Noise Design
• Powder Coated Body
• ISO 9001:2000 Certified Plant
• Low Temperature Rise
• Low Voltage Operation Up to 180V
• Preferred by all purpose machinery motor

Vertical Knife 550W/750W Technical Specification

It is the most useful cutting instrument in apparel cutting. In apparel industry, more than 99% cases this knife is used. This machine is called straight knife cutting machine because its cutter is straight in shape. It is used for both woven & knit fabric. In this machine different types of straight knife are used according to the different cutting objects. This machine provides good efficiency. Cutting of intricate patterns and tight turns due to the low-profile base plate and narrow silhouette standard

Continuous, Smooth Running

Perfect fit and continuous running with cross heads, crank and knife slides that are machined to a tolerance within .0005"(0.0013cm)

Simple handling of the machine due to its low center of gravity and the best power-to-gravity weight ratio in the industry

Low maintenance requiring only daily lubricating with the easy-to-use One Shot single-reservoir oiling system

Features of Straight Knife Cutting Machine

• The main parts of this machine are straight knife, electric motor, handle, Grinder, base plate, stand/ knife holder, lubricating unit, wheel etc.
• Could be used to cut higher depth of fabric.
• Knife height is 10 cm to 33 cm.
• Knife stroke is 2.5 cm to 4.5 cm.
• Motor R.P.M. is 3000 to 4000.
• Auto grinder is used.
• Auto lubricating unit works for this machine.
• Different types of knife edge are used for cutting different objects Such as, straight edges, wave edge, sew edge & serrated edge.
• A Handle for the cutter to direct the Knife.
• Knife guard is attached to the front of the knife.
• Sharp & heavy corners can be cut.
• Maximum 70% of knife height is used for fabric lay.
• Wheels are under the base plate to move the machine smoothly.
• Machine weight is around 12-15 kg.
• Knife cut the fabric very fast due to high speed of motor. That increases the risk of fabric damage.

Advantages of Straight Knife Cutting Machine

• A large number of fabric lays can be cut by the machine due to high length of knife & R.P.M. of the motor. So, productivity is high.
• Automatic grinding.
• Automatically lubrication.
• Comparatively cheap.
• Can be moved easily by wheel.
• Suitable for straight line & curve line.
• Can be cut high curve line than round knife.
• Fabric can be cut from any angle.

Spindle Drive Motor : ( CC2, CC3, ICBT)

Tire cord processing requires a motor of highest quality and reliability. The use of the most modern components is necessary. Our Company develops and provides you with the appropriate technology in Spindle Drive Motors like in different model CC2, CC3, ICBT. Top Quality Tire Cord Spindle is produced for Two-For-One Twisting Machines in a Highly Economical Manner. This Applies To Both Standards And To New Processes. By summing up our strengths such as process reliability, quality, cost-effectiveness, flexibility and user-friendliness, we fortify our customers market position and help them reach their aims.

• Motor Spindle shaft is Steel alloy high resistance to stress and its surface hardened and grounded.
• Aluminum Frame and end shield cover of motor is alloy with LM24 materials.
• Storage Disk is alloy with LM24 Material and also with hard caroming plating process. So cord sleeping is smoothly.
• Deflection guide, tube is very hard and smooth; it is molded with special ceramic material for long life.
• All motor are winding with additional anti tracking protective coating of air draying varnish is applied on the winding over hangs; PTC Thermistor 130c and insulation class F (155c)
• 2RS Deep grove ball bearing is filled with homogeneous, short fibred texture. It temperature range -40c to 130c and drop point >220c.

No any R.P.M. reduction and no any vibration due to the Motor with rotating parts are dynamically balanced for smooth rotate.

We are offering vibration motor.Working performance very high , all base raw material very high quality use in motor like bearing , shaft , cast iron , stamping lamination , copper wire , etc.

Industrial sewing machine like a readymade garments, Hosiery knit wear , embroidery , tailoring , woven sacks industries, jut bag industries, All motor is especially designed with powerful performance for all type of industrial sewing machines purpose.

We are offering vibration motor.Three phase input voltage: standard executions 50hz 220-230380-400v , 60hz 220-240440-480v , standard: 2 poles:- 30003600 rpm - 5060hz, 4 poles:- 15001800 rpm - 5060hz, 6 poles:- 10001200 rpm - 5060hz special input voltages available on request.

VIBRATORS MOTORS to meet the requirement of various industries where in material handling plays a major role. These vibrators help to empty, dose, convey, loosen, test, clean, screen, compact, distribute, feed etc., & therefore have a very wide application in Mining, Fertilizer, Chemical, Parma & Food Industry etc Sonal-FOOT BASE VIBRATORS MOTOR vibrators Motors are robust, reliable, highly loadable, quite running and require no maintenance are totally enclosed, surface cooled units operating 415 440 volts, 3 phases, 50 cycles. A.C. Supply. Generously dimensioned cylindrical roller bearing, self-lubricating maintenance-free, long life expectancy. The vibrating frequency depends on the revolutions of the rotary unit & can be chosen from four ranges available via, frequencies are 3000, 1500, 1000, 750 vibrations per minute. When used as a single unit, they impact circular vibrations. If directional vibrations are needed, two vibrators running in the opposite direction should be use. The Centrifuge force can be adjusted from zero to maximum by manipulating the relative positions of the eccentric weights provided on either side of the shaft. Various models are available giving a wide choice of Centrifugal force, frequency of vibration, mounting position, Insulation etc. The customer is therefore assured of getting the most suitable vibrator to meet these requirements.

Single Phase Motors are used in variety of applications in households and small industrial sectors, where three phase power supply is not available. Single Phase motors are classified based on the type of starting mechanism. Widely used starting mechanisms are Split Phase Capacitor Start and Run Capacitor Start Induction Run & Capacitor Start Capacitor Run. Depending upon the application load characteristics, mounting suitability and cooling mechanisms, we have single phase motors in various output powers, constructions and enclosures in the product categories given below. We offer custom made motors to suit every existing and emerging application requirements in segments of domestic applications, farm equipments, medical & healthcare equipment, industrial and construction equipment. Motors are designed for specific applications in as per customer requirement by considering following major aspects.

Single Phase Motors are used in variety of applications in households and small industrial sectors, where three phase power supply is not available. Single Phase motors are classified based on the type of starting mechanism. Widely used starting mechanisms are Split Phase Capacitor Start and Run Capacitor Start Induction Run & Capacitor Start Capacitor Run. Depending upon the application load characteristics, mounting suitability and cooling mechanisms, we have single phase motors in various output powers, constructions and enclosures in the product categories given below. We offer custom made motors to suit every existing and emerging application requirements in segments of domestic applications, farm equipments, medical & healthcare equipment, industrial and construction equipment. Motors are designed for specific applications in as per customer requirement by considering following major aspects.

• 0.25 H.P. to 3.0 H.P. Motors are available.
• Motors are available in cast iron body and also in metal body.
• Models Available in 220V/110V, 60Hz
• Load conditions: - Output, speed, duty cycle and Noise levels.
• Field Conditions: - Supply conditions, temperature, humidity, vibration levels, dust / water Ingress etc.
• Class F insulation with Class B Temperature Rise Design
• High Efficiency, Long life motors
• Heavy Duty, Ball Bearing.
• High Starting Torque, Low Noise Design
• Powder Coated Body
• ISO 9001:2000 Certified Plant
• Low Temperature Rise
• Low Voltage Operation Up to 180V
• Preferred by all purpose machinery motor

Vertical Knife 550W/750W Technical Specification

It is the most useful cutting instrument in apparel cutting. In apparel industry, more than 99% cases this knife is used. This machine is called straight knife cutting machine because its cutter is straight in shape. It is used for both woven & knit fabric. In this machine different types of straight knife are used according to the different cutting objects. This machine provides good efficiency. Cutting of intricate patterns and tight turns due to the low-profile base plate and narrow silhouette standard

Continuous, Smooth Running

Perfect fit and continuous running with cross heads, crank and knife slides that are machined to a tolerance within .0005"(0.0013cm)

Simple handling of the machine due to its low center of gravity and the best power-to-gravity weight ratio in the industry

Low maintenance requiring only daily lubricating with the easy-to-use One Shot single-reservoir oiling system

Features of Straight Knife Cutting Machine

• The main parts of this machine are straight knife, electric motor, handle, Grinder, base plate, stand/ knife holder, lubricating unit, wheel etc.
• Could be used to cut higher depth of fabric.
• Knife height is 10 cm to 33 cm.
• Knife stroke is 2.5 cm to 4.5 cm.
• Motor R.P.M. is 3000 to 4000.
• Auto grinder is used.
• Auto lubricating unit works for this machine.
• Different types of knife edge are used for cutting different objects Such as, straight edges, wave edge, sew edge & serrated edge.
• A Handle for the cutter to direct the Knife.
• Knife guard is attached to the front of the knife.
• Sharp & heavy corners can be cut.
• Maximum 70% of knife height is used for fabric lay.
• Wheels are under the base plate to move the machine smoothly.
• Machine weight is around 12-15 kg.
• Knife cut the fabric very fast due to high speed of motor. That increases the risk of fabric damage.

Advantages of Straight Knife Cutting Machine

• A large number of fabric lays can be cut by the machine due to high length of knife & R.P.M. of the motor. So, productivity is high.
• Automatic grinding.
• Automatically lubrication.
• Comparatively cheap.
• Can be moved easily by wheel.
• Suitable for straight line & curve line.
• Can be cut high curve line than round knife.
• Fabric can be cut from any angle.

Spindle Drive Motor : ( CC2, CC3, ICBT)

Tire cord processing requires a motor of highest quality and reliability. The use of the most modern components is necessary. Our Company develops and provides you with the appropriate technology in Spindle Drive Motors like in different model CC2, CC3, ICBT. Top Quality Tire Cord Spindle is produced for Two-For-One Twisting Machines in a Highly Economical Manner. This Applies To Both Standards And To New Processes. By summing up our strengths such as process reliability, quality, cost-effectiveness, flexibility and user-friendliness, we fortify our customers market position and help them reach their aims.

• Motor Spindle shaft is Steel alloy high resistance to stress and its surface hardened and grounded.
• Aluminum Frame and end shield cover of motor is alloy with LM24 materials.
• Storage Disk is alloy with LM24 Material and also with hard caroming plating process. So cord sleeping is smoothly.
• Deflection guide, tube is very hard and smooth; it is molded with special ceramic material for long life.
• All motor are winding with additional anti tracking protective coating of air draying varnish is applied on the winding over hangs; PTC Thermistor 130c and insulation class F (155c)
• 2RS Deep grove ball bearing is filled with homogeneous, short fibred texture. It temperature range -40c to 130c and drop point >220c.

No any R.P.M. reduction and no any vibration due to the Motor with rotating parts are dynamically balanced for smooth rotate.

We are offering vibration motor.Working performance very high , all base raw material very high quality use in motor like bearing , shaft , cast iron , stamping lamination , copper wire , etc.

Industrial sewing machine like a readymade garments, Hosiery knit wear , embroidery , tailoring , woven sacks industries, jut bag industries, All motor is especially designed with powerful performance for all type of industrial sewing machines purpose.