ULTRAMAX INDIA

Exhibition Road, Patna, Bihar

DESCRIPTION Ultracrete EPT-031 is a superior quality Rapid Hardening Admixture. Ultracrete EPT-031 are an important component of concrete, together with the cement, water, aggregates EPT-031 are used to increase the initial rate and speed of the chemical reaction between cement and the mixing water. This results in a faster stiffening of the concrete (Water Reducing & Rapid Hardening Admixture) or faster hardening and strength development (hardening admixture) or both.This Environmental Product Declaration covers hardening admixture for normal concrete. Ultracrete EPT-031 specially developed for application in pre-cast concrete, high performance concrete and for manufacturing of cement tiles, paver blocks etc. ADVANTAGES The Maion Function Of Ultracrete EPT-031 Are As Under:1) Reduces Setting Time : Depending On The Dose And Ambient Temperature2) Reduces Water Up To 15%.3) Improves Workability At A Given Wc Ratio.4) Quick Setting Of Cement5) Gain Early Hardening And Extra Compressive Strength.6) Early Mould Release.7) Time Saving.8) Increasing Production.9) Minimizing Breakage.10) Easy To Dose.11) Used To Avoid Hydration Delay In Winter Especially DIRECTION FOR USEUltracrete EPT-031 should be added to concrete mortar during the mixing cycle at the same time as water is added. Avoid adding to dry cement.

Description AEA-401 it is a high performance, chloride-free water reducing cum air entraining agent for mortars, concrete and lightweight aggregate mixes. The introduction of AEA-401 brings about entrainment of innumerable microscopic air bubbles of suitable size and spacing evenly distributed throughout the matrix. Uses: AEA-401 is designed for use in exterior concrete such as highway paving, curb and gutters, sidewalks, driveways, slabs, walls, or other areas needing protection from freezethaw damage or the harmful effect of de-icing salts. AEA-401 is effective in increasing the workability of the concrete, especially in lean or harsh mixes. Advantages Superior resistance to freezethaw cycles and scaling.Improves workability.Reduces bleeding.Improves appearance of architectural concrete.Reduces size and number of capillary chanels, increasing impermeability.Increased compressive strength in lean mixes.Substantially increased durability.Increases moisture retention for cement hydration.Superior air-void system.

DescriptionUltracrete MR-W is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete. Advantages:Non-staining: No cleaning of unsightly oil stains if plastering is not required.High quality : It Produces fair faced finish concrete.Versatile: It can be used on all types of moulds.Minimises cleaning : It makes cleaning of form faces between pours very easy.Concentrate form : It reduces storage and transport costs.Water based : It only requires water for dilution.Corrosion inhibitor: It aids corrosion inhibition. Application InstructionsCheck whether mould surfaces are really clean before re-use?Is a fresh coat of Ultracrete MR-W applied before each re-use?Has the Ultracrete MR-W been diluted exactly 1:6 with water by volume?Check whether the coverage rate is the highest and film thickness the lowest possible?Is the coat really dry before placing the concrete? Is the de-moulding time 24 hours or more?