Our Products
Our offered Product range includes auto strapping machine, Semi Automatic Strapping Machine, Automatic Strapping Machine, Semi-Automatic Strapping Machine and ABS-11 - Locking and Capping Machine.
| features: |
| 1.standard accessory, it is advantage is stable quality, durable material, and easy maintenance.2.special design-control pp strap cooling time. It can macke the pp strap to fasten well in any time.3.electricity-saving device, the motor automatically stops running after 35 seconds pause to reduce the normal wear and to prolong the machine life.4.the advanced p.c.b microchip circuit board control system, less malfunction and easy maintenance.5.non-fast heater plate, it will increase the work efficiency.6.installing an auxiliary feed switch and cut switch at the control panel makes you operate more conveniently. |
| FEATURES: |
| 1.Standard accessory, its advantage is stable quality, durable material, and easy maintenance.2.Special design-Control PP strap cooling time. It can macke the PP strap to fasten well in any time. 3.Electricity-saving device, the motor automatically stops running at once after one ciyle strap to reduce the normal wear and to prolong the machine life. The advanced P.C.B microchip circuit board control system, less malfunction and easy maintenance.4.Non-fast heater plate, it will increase the work efficiency.5.Installing an auxiliary feed/reset switch and tension adjust switch at the control panel makes you operate more conveniently. |
| FEATURES: |
| 1.Adopting programmable control (frequency converter), reliable in performance, convenient in operation; the lapping type and time can be designed on custommersrequirements.2.Equipped with a photoelectric detector, antomatically testing the goods height and controlling the traval limit.3.Rotary table can reset automatically, thus ensuring correctin-and out position of the tray.4.Convenient in film roll replacement, LLDPE film with outside diameter280mm, width500mmand paper core 76mm can be used.5.Custom-made specification is available and also providing a complet set of packing system of conveying line.6.With top press |
| FEATURES: |
| 1.Adopting programmable control (frequency converter), reliable in performance, convenient in operation; the lapping type and time can be designed on custommersrequirements.2.Equipped with a photoelectric detector, antomatically testing the goods height and controlling the traval limit.3.Rotary table can reset automatically, thus ensuring correctin-and out position of the tray.4.Convenient in film roll replacement, LLDPE film with outside diameter280mm, width500mmand paper core 76mm can be used.5.Custom-made specification is available and also providing a complet set of packing system of conveying line.6.Percent of pre-stretch;25% |
| FEATURES: |
| 1.Adopting programmable control (frequency converter), reliable in performance, convenient in operation; the lapping type and time can be designed on custommersrequirements.2.Equipped with a photoelectric detector, antomatically testing the goods height and controlling the traval limit.3.Rotary table can reset automatically, thus ensuring correctin-and out position of the tray.4.Convenient in film roll replacement, LLDPE film with outside diameter280mm, width500mmand paper core 76mm can be used.5.Custom-made specification is available and also providing a complet set of packing system of conveying line. |
| Name | YQX-3 Automatic capping machine | Model | YQX-3 |
| Description | |||
| Summarize: | |||
| Name | JGS-980 Multi-purpose locking and capping machine | Model | JGS-980 |
| Description | |||
| Summarize: | |||
| Model |
JGS-980 |
JGS-880 |
|
Power |
220V/50HZ |
220V/50HZ |
|
Capacity |
1000 bottles/hour |
800 bottles/hour |
|
Caliber |
20-35mm |
20-35mm |
|
Bottle height |
20-350mm |
70-330mm |
|
Machine Weight |
82kg |
72kg |
|
Machine Dimension |
700*340*1260mm |
605*300*970mm |
KZ-2T manual electro thermal strapping machine takes polythene plastic strap as binding material, which is mainly used in packaging and binding of paper cartons, wooden cases and paper parcels in sectors of business, postal service, railway, and bank, for food, pharmaceutical, publishing and so on. And this machine has high sensitivity and good energy-saving effect.
This series of machine integrate rinsing.filling and capping.suitable for filling the pure water or the mineral water in 3 or 5 gallons.The filling speed ranges fron 120BPH to 1200BPH.Rinser/Filler/Capper Monoblock.Automatic Loading Machine.Bottle Otuside Washer.Bottle inside Washser.Filler/Capper Machine, Decapper.Heating Shrink Tunnel, Conveyor System, Complete Line Control System.
| Model | QGF-120 | QGF-240 | QGF-300 | QGF-450 | QGF-600 | QGF-900 | QGF-1200 |
| Theoretial output | 1 | 2 | 3 | 4 | 8 | 8 | 8 |
| Heating capacity | C270×490 | C270×490 | C270×490 | C270×490 | C270×490 | C270×490 | C270×490 |
| Max bottle volume | 6-120 | 100-240 | 250-300 | 400 | 800 | 800 | 800 |
| Gas pressure(Moa) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.6 | 0.6 | 0.6 |
| Gas consumption(m3/min) | 0.37 | 0.37 | 0.6 | 0.8 | 1 | 1.5 | 1.8 |
Carbonated Drinks Washing Filling Capping Line
This line is mainly for washing, filling, and capping of carbonated drink, such as aerated-drink, cola, ice tea, aerated mineral water, and so on. It has many characteristics, such as easy operation, steady performance. It conforms to the sanitation requirements.It is an ideal choice for small-and medium-sized drink factories.
|
Type&Name |
Spraying-type Washer |
Isobaric Filler |
Rotatory Capper |
|
Production CapacityA288;bphA289;A288;350mlA289; |
1000-2000 |
1000-2000 |
1000-2000 |
|
Heads of Washer, Filler, Capper |
12 |
12 |
1 |
|
Applicable Bottle Type(mm) |
HA309;160-320Φ50-100A288;VolumeA289;330-1500ml |
||
|
Motor Power(kw) |
1.2 |
1.1 |
0.55 |
|
DimensionA288;L*W*HA289;A288;mmA289; |
1200*1200*1600 |
1200*1150*1980 |
940*700*2130 |
|
WeightA288;kgA289; |
900 |
1200 |
600 |
Carbonated Drinks Washing Filling Capping Production Line
This machine is used to produce all kinds of carbonated drink contained in PET bottle. Washing, filling, and capping can be carried out on this machine. This machine has the following characteristics: scientific and reasonable design, beautiful appearance, complete function, convenient maintenance, and high automation
Features:
(1) The suspending bottle-necks cramping design makes the whole production line more stable during the working process and it also avoids malfunctions caused by the differences ofthickness and height of the bottle. This design also dramatically reduces the required numberof changeable parts, makes it more convenient to change the types of bottles.(2) The advanced technologies from Germany and Italy are introduced. Isobaric filling technology is used in this machine. Filling is quick and the amount of the liquid can be controlled accurately. Also, the beverage-holding tank is fully-closed and the CIP in-terface is installed.(3) Magnetic torque is used for screw capping, and the power of screw capping can be adjusted steplessly. It can use constant power to screw the plastic caps and will not damage the caps.(4) Horizontal swirl wind-power cap-managing device is used to avoid damaging the surface of the cap. And when there is shortage of caps in the caps storage tank, caps will be fed automatically.(5) Human-machine interface touch-screen is adopted in this machine. The liquid level in the tank can be controlled automatically.The filling and capping will stop automatically when there is no bottle.(6) All parts that have direct contact with the beverages are made of high quality stainless steel. And the main electrical components are from famous international companies.
| PET bottles rinsing/ filling / capping three-in-one machine is dedicated to the mineral water, purified water and other non-carbonated beverage filling. the advanced models. The aircraft targeted a transmission of bottle neck; only minimal changes to transform pieces can be applied to a variety of sizes of the format, the greatest extent possible reduction of wear and tear on the bottle, a smooth transfer. Filling approach to micro-gravity vacuum filling, increase the speed of filling, the filling can be precise control level. Health-circulation lines for product quality to provide a reliable guarantee.?Frame: The main structural is carbon steel with paint, and the surface are 304 stainless steel cladding, and adjustable foot of stainless steel?The part of rotary bottle rinsing The number of rinsing nozzle is 18, and the washers are stable and reliable, high-efficiency?The part of Rotary filling The number of filling valve is 18, and the parts of contacting products are 304 stainless steel materials. Filling tank of both internal and external surfaces are deal with mirror polish.?The part of rotary capping The number of capping is 6, and the level of cap-covered grounds, with no damage to the caps surface, covered hopper with less automatically send signals to the aircraft shelters, with auto-cover feature.?The part of cap elevator The domestic well-known motor and reducer, 304 stainless steel cover, reducing the cap on the secondary pollution, 304 stainless steel cover under capping, covered warehouses and covered under a covered slot with electronic uncovered detection system, automatic control sending capping machines and the whole operating speed. Do not send bottles can be realized without cover, not covered under the cover automatic shutdown.?Power system Frequency Control, the various sports bodies are pieces of gear transmission, a smooth operation, all-round loser bottles for engineering plastics components, with security agencies.?Control system and operation panel Electronic sealed boxes, 304 stainless steel, inverter, AC contactor, and switch components |
| 250 -- 1500mlRange of bottle diameter: 50 92mmRange of bottle height: 140 -- 330mmInner diameter of the bottle neck: 20 -- 30mm |
| XGF 18/18/6X ---- Rinsing MachineG ---- Filling MachineF ---- Capping Machine |
| Composition (rinsing) , (filling) (capping) , (Air driving)Body machine (electric) , (electric box) , (working platform), (main transmission) , (frame) , (Chain box and entering and exiting arc board) |
| Valve quantities of filling: 18 pcsQuantity of capping: 6 pcsQuantity of rinsing: 18 pcsCapacity: 500ml (6000b/h--7000b/h), 1000ml (3000-4000b/h) 1500ml (2000b/h--2500b/h)Can suits for your different bottle size, no need change mould if the bottle neck is same. |
| Main power: 2.2KWFilling pump:0.55kwCap unscrambler:0.25kwAir blower: 0.75kwConveyor motor: 0.55kwAutomatic cap loader: 0.8kw ( motor 0.25kw, air blower:0.55kw)Working Voltage : 380V 50HZ, 3 phase |
| LxWxH : 2600x1800x2520mmWeight of equipments : 2000Kg |
| PET bottles rinsing/ filling / capping three-in-one machine is dedicated to the mineral water, purified water and other non-carbonated beverage filling. the advanced models. The aircraft targeted a transmission of bottle neck; only minimal changes to transform pieces can be applied to a variety of sizes of the format, the greatest extent possible reduction of wear and tear on the bottle, a smooth transfer. Filling approach to micro-gravity vacuum filling, increase the speed of filling, the filling can be precise control level. Health-circulation lines for product quality to provide a reliable guarantee.?Frame: The main structural is carbon steel with paint, and the surface are 304 stainless steel cladding, and adjustable foot of stainless steel?The part of rotary bottle rinsing The number of rinsing nozzle is 18, and the washers are stable and reliable, high-efficiency?The part of Rotary filling The number of filling valve is 18, and the parts of contacting products are 304 stainless steel materials. Filling tank of both internal and external surfaces are deal with mirror polish.?The part of rotary capping The number of capping is 6, and the level of cap-covered grounds, with no damage to the caps surface, covered hopper with less automatically send signals to the aircraft shelters, with auto-cover feature.?The part of cap elevator The domestic well-known motor and reducer, 304 stainless steel cover, reducing the cap on the secondary pollution, 304 stainless steel cover under capping, covered warehouses and covered under a covered slot with electronic uncovered detection system, automatic control sending capping machines and the whole operating speed. Do not send bottles can be realized without cover, not covered under the cover automatic shutdown.?Power system Frequency Control, the various sports bodies are pieces of gear transmission, a smooth operation, all-round loser bottles for engineering plastics components, with security agencies.?Control system and operation panel Electronic sealed boxes, 304 stainless steel, inverter, AC contactor, and switch components |
| 250 -- 1500mlRange of bottle diameter: 50 92mmRange of bottle height: 140 -- 330mmInner diameter of the bottle neck: 20 -- 30mm |
| XGF 18/18/6X ---- Rinsing MachineG ---- Filling MachineF ---- Capping Machine |
| Composition (rinsing) , (filling) (capping) , (Air driving)Body machine (electric) , (electric box) , (working platform), (main transmission) , (frame) , (Chain box and entering and exiting arc board) |
| Valve quantities of filling: 18 pcsQuantity of capping: 6 pcsQuantity of rinsing: 18 pcsCapacity: 500ml (6000b/h--7000b/h), 1000ml (3000-4000b/h) 1500ml (2000b/h--2500b/h)Can suits for your different bottle size, no need change mould if the bottle neck is same. |
Gill Road, Ludhiana, Punjab 