Solartroniks

Vakola, Mumbai, Maharashtra

We are offering CREE LED Solar Bicycle Headlight with very high lux high intensity, white light torch made using CREE led bulb with protection circuit to enhance life of the battery. Ordinary headlights are plastic bodied which break easily and actually do not last for more than a few days. And if you do not use it for a long time, the batteries get discharged, leak and your money is all wasted. You will be amazed to see the light power intensity of our CREE LED Solar Bicycle Headlight.

Advantages of our CREE LED Solar Bicycle Headlight :

• The effective intensity of CREE LED Solar Bicycle Headlight measured after the light emerges from the collimator, is very high with which you can recognize the face of a person standing 100 ft away. Power consumed is very low, about 1 watt
• We use original Japanese batteries. Not Chinese low quality imports
• The full charge takes 5 hours and gives an output for 3 to 4 hours. (You can safely keep it for charging overnight, without the fear of it getting overcharged, as our protection circuit with shut off the power to the battery when it reaches a threshold). We have incorporated a slower charging rate in this torch to enhance the life of the battery, as well as the charger.
• Very high quality aluminum barrels from Jindal aluminum anodized after cutting them to our size and specification. Rubber accessories are also good quality manufactured in-house
• Packed and shipped in quality hard box packing for safe transportation

We counted among successful Manufacturers, Exporters, and Suppliers of LED Bulb & Tubes. These Bulbs and Tubes are preferred for power saving. Unlike incandescent bulbs / CFL lamps or fluorescent tube lights, our LED Bulb & Tubes work with utmost efficiency and deliver life-long performance.

The technical features of these are mentioned below.

For Bulbs :

• Input Voltage : 150265V   5060Hz
• LED used : Everlight ( Taiwan ). High Lumen SMD LED
• Input Current used : from 35 ma for 3 Watt LED Bulb onwards
• Lumen Output : From 250 Lumen for 3 Watt Bulb onwards
• Power consumed : 4.5 Watts for 3 Watt Bulb onwards.
• Bulb output capacity range from 3 Watt, 5 Watt, 7 Watt, 10 Watt, 12 Watt, etc.

For Tube Lights :

• Input Voltage : 100265V   5060Hz
• LED used : Everlight ( Taiwan ). High Lumen SMD LED
• Lumen Output : From 800 Lumen for 1 feet tube light onwards
• Power Output : 6 Watt for 1 feet tube light onwards
• Power consumed : 8 Watt for 1 feet tube light onwards

 

Tube Light capacity range from 1 feet, 2 feet and 4 feet having increasing range of efficiency, which can be checked using a LUX meter.

We are offering data loggers, introduction:the unit scans 16 inputs, and stores the readings with a time stamp in its memory, at user-set intervals. The user may easily program the input type (thermocouple, rtd, 4-20ma, 0-10v), and also calibrate the same individually from the front panel. Two relays are provided to be energized when one or more readings exceed user-set high & low limits. It also transmits in real time the readings over a communication interface at user-set intervalsthe user can also see a dump of all accumulated data at any time. The data is transmitted to the user's pc in a format readily opened by a spreadsheet such as ms-excelthe unit will also scroll on its front panel display the readings of each input, along with the channel number, and the high low limits for that channel. The unit maintains a 100 year real time clock calender, which may be set by the user. The communication interface is one of the following, based on your model:1. Direct usb (for distances not more than 3 meters)2. Rs232 (for distances not more than 100 meters). 3. Rs485 (for distances not more than 1 km)4. Ethernet (for large distances over lan & internet)user interface:the front panel is described below (fig 1). The main components of the front panel are:1. 4 line x 16 characters alphanumeric display for display of process values, settings, etc. 2 keys: set, inc, dec, hld, esc 3. 'buffer full' (bf) indicator lamp4. 'logging enabled' (le)indicator. 5. 'overwrite(loop) mode on' (owr)indicator. 6. 'display hold'(hld) indicator. 7. 'communication in progress'(com) indicator.

We are offering advanced Solar Data Loggers.

Introduction :

• The unit scans 16 inputs, and stores the readings with a time stamp in its memory, at user-set intervals.
• The user may easily program the input type (thermocouple, rtd, 4-20ma, 0-10v), and also calibrate the same individually from the front panel.
• Two relays are provided to be energized when one or more readings exceed user-set high & low limits.
• It also transmits in real time the readings over a communication interface at user-set intervals the user can also see a dump of all accumulated data at any time.
• The data is transmitted to the user's pc in a format readily opened by a spreadsheet such as ms-excel the unit will also scroll on its front panel display the readings of each input, along with the channel number, and the high low limits for that channel.
• The unit maintains a 100 year real time clock calender, which may be set by the user.

The communication interface is one of the following, based on your model :

• Direct usb (for distances not more than 3 meters)
• Rs232 (for distances not more than 100 meters).
• Rs485 (for distances not more than 1 km)
• Ethernet (for large distances over lan & internet)

User Interface :The front panel is described below (fig – 1).
The main components of the front panel are :

• 4 line x 16 characters alphanumeric display for display of process values, settings, etc.
• Keys : set, inc, dec, hld, esc
• 'buffer Full' (bf) indicator lamp
• 'Logging Enabled' (le) Indicator.
• 'Overwrite (loop) mode on' (owr)indicator.
• 'Display Hold'(hld) Indicator.
• 'Communication in Progress' (com) indicator.

Trained to offer consultancy services for residential and commercial installation of sma inverters for on grid and off grid applications. On grid application in non net metering locations would be use of solar energy to reduce dependence on grid and thus save energy cost which is higher especially for commercial application in an industry during the day. Our expertise includes, designing a systems using sma inverters and suitable solar panels for every application base, depending on the inputs provided in terms of energy consumption and availability of space for laying the solar panels.

You are used to seeing many LED rechargeable torches available from roadside vendors, which work with low intensity. They are plastic bodied which break easily and actually do not last for more that a few days. And if you do not use it for a long time, the batteries get discharged, leak and your money is all wasted.
Do you wish to have a good sturdy torch with a powerful intensity ( as good as a room light ) which can be used during an emergency, without running to a nearby store to get batteries to use it when you need it the most?
Do you feel you are wasting too much of money on batteries for your torch, and would prefer to have it lighted either by rechargeable batteries, (without removing these batteries from the torch) which can be charged while using them.
If your answer to anyone or all the above questions is positive, then consider using our Indian made portable CREE LED light torch, which fit snugly into your shirt pocket. You will be amazed to see the light power intensity, (We have also included a photo album of the torch performance seen outside here. You can compare the light intensity when the torch is on as compared to when the torch is switched off. Watch a short movie clip of the torch performance here.
Please do not compare this with any local LED Rechargeable torch available in the market. You have to compare the below mentioned reasons.

• The effective intensity of this torch measured after the light emerges from the collimator, is very high with which you can recognise the face of a person standing 100 ft away. Power consumed is very low, about 1 Watt
• We use original Japanese batteries. Not Chinese low quality imports
• The full charge takes 5 hours and gives an output for 3 to 4 hours. (You can safely keep it for charging overnight, without the fear of it getting overcharged, as our protection circuit with shut off the power to the battery when it reaches a threshold). We have incorporated a slower charging rate in this torch to enhance the life of the battery, as well as the charger.
• Very High quality aluminium barrels from Jindal Aluminium anodised after cutting them to our size and specification. Rubber accessories are also good quality manufactured inhouse
• Please do see the various positive feedbacks received for this product. All have appreciated the value of this torch
• Packed and shipped in Quality Hard Box packing for safe transportation
• Shipped with Electric charger with LED light to indicate end of charging

We offer a wide range of Solar Modules in the market. The Solar Modules made accessible by us are energy efficient and work on solar energy without any hassle. Our Solar Modules are available from the weight of 5gm to 200gm as per the requirements. They are also available in different dimensions according to the demand of the clients.

We are offering Solar Charge Controller, 12v 24v auto 15a solar charge controller 3 led battery and other charge status solar charger for lead acid batteries electronic protection. Our Solar Charge Controllers are fully automatic operation PWM charge mode (soc), microcontroller digital accuracy suitable for all 1224v dc lamps, fans, etc. have big terminals and big distance between terminals. They have double digit led display, with numbers equal for timer setting operated by electronic push button. Our Solar Charge Controllers are highly efficient, energy-saving, safety, have temperature compensation with external temp sensor electric energy instruction protections. They also have reverse polarity, solar panel reverse polarity, load over-current, and battery open-circuit protection.

We bring forth Solar Power Bank Charger Bags high on demand in the market. The Solar Power Bank Charger Bags mono poly crystalline approved dual solar module. The opened bag has dimension of 430 mm x 210 mm. It is only 250 gms so very light in weight.

 

Features :

• Brand-new mono poly crystalline approved dual solar module fitted in a cloth bag.
• The two solar modules are folded to form a smaller bag of 210 mm x 210 mm (approximately) while transportation.
• When open the bag is approximately 430 mm x 210 mm
• Max work voltage : 5 - 5.5v
• Max work current : 1500ma
• Power : 7.5 - 8.25 w
• Weight : approximately 250 gms

We bring forth Floating Solar Fountain, 220 liters per hour floating solar fountain for birdbaths, pools & backyard pond. This Floating Solar Fountain has to be used with the solar panel provided only. Any other electrical source will damage the pump. Besides, this is a water pump and has to be used in water only. If it is operated in air, it will get burnt. So when taking it outside in the sun to the pool, please ensure that the solar panel is covered, so that the pump does not start operating in the air, till it is immersed into the water. It is used in fits birdbaths, pools, and garden and backyard ponds. This floating solar fountain is self-contained, which means it keeps moving once being put in the pond in sunny day. It features built-in filter, an integral low voltage pump and thin solar panel. The falling water not only makes a nice sound, but also can speed up the water moving to keep mosquitoes to a minimum.

Features :

• This floating solar fountain is made from plastic including the solar panel.
• The design is thin and shallow, very portable;
• Built-in filter and pump;
• Supplied with four different interchangeable fountain nozzles
• 0.6meter (23.6 inch) maximum water lift height in full sun
• Water flow capacity : 220 liters per hour
• No installation required
• Package weight : 0.5kg
• Color : Black.

We are known as a dependable Manufacturer, Exporter, and Supplier of Solar Powered LED Light Strings.

Specifications :

• Solar panel : 2v160ma
• Battery : ni:mh battery 1.2v 1200ma:
• On-off control : by light control:
• Work mode : constant on and flash:
• Lighting time : above 12 hrs in full sunny day:
• Waterproof : ip44
• Length : 10m or 15m can be choose;
• Material of frame:abs:
• Imported led with spacing 150mm, 100pcs leds:
• Color : White, blue, yellow, red, warm white, pink, mix color, green:

Unit Weight : 400g;

We are offering 8 watt 800 lumen everlight led tubelight, 1 feet led tube light with fixture: input voltage: 100265v 5060hz lumen output: 800 lumen wattage: 8 watts led used: everlight ( taiwan ). High lumen smd led

We are offering temperature sensors for solar applications. We have various types of sensors ranging from pt 100, thermocouples ( j, k, r, s, t ), thermistors and are available ex - stock with us

We are offering Temperature Sensors for solar applications. We have various types of Temperature Sensors, ranging from pt 100, thermocouples (j, k, r, s, t) to thermistors. These sensors are available ex-stock with us.

Types of Temperature Sensors : PT 100, J, K, R, S, T Thermocouples, Thermistors

We are offering cree led stainless steel body table lamp with rechargeable battery by solar. This table lamp is using a 1 watt cree led with suitable heat sink, and we guarantee a bright light that does not change colour even after one and a half years. We use 2 li-ion batteries to run the table lamp for over 6 hours and these can be charged using an electric adapter or a solar panel of 10 watt capacity for an 8 hour period. The body is built using stainless steel.

We offer a wide range of Solar Caps with fan for kids and adults. Have you ever walked in the sun, wishing that there were an air conditioner blowing cool air on your face, to prevent the sweat from trickling down your face? We introduce Cool Caps which are solar powered with fan.

 

This solar evaporative air conditioned Cool Cap uses sunshine to keep you cool when temperature is going off the scale on a hot sunny day. It reduces your perspiration as it protects your beautiful face against sunburn at the same time. With a small powerful fan powered by a solar panel atop the cap, the perspiration is kept under control. The fan quietly blows across forehead and face to reduce perspiration and keep you very comfortable even when it over 100^o degree out there. Cap is with adjustable headband & fits almost any size head.

Features :

• Stylish baseball cap with solar powered cooling fan
• Color : various options available
• Material : cotton
• No consumption of conventional electricity.
• No maintenance cost.

We manufacture CREE LED Table Lamps with stainless steel body table. Our CREE LED Stainless Steel body Table Lamp comes with rechargeable battery by Solar. Our CREE LED Table Lamp uses 1 Watt CREE LED with suitable heat sink, and we guarantee for bright light. It does not change color even after one and a half years. We have fitted 2 Li-ion batteries in the lamp to power it for over 6 hours. These batteries can be recharged using an electric adapter or a solar panel of 10 watt capacity for an 8 hour period. The body is built using stainless steel.

We are offering portable handheld digital indicator field thermometer.Suitable for solar field installations and maintenance jobs. A wide range of fast response thermocouple probes are available to suit any specific needs. The instrument is housed in a molded plastic case and leather pouch.Specifications :- range - 0 - 1200 deg c cral, -50 - 400 deg c pt-100display - 3 - 12 digit lcd, resolution - 0 - 200 deg c, 0.1 deg c, 1 deg c above 200 deg caccuracy - + 1%, + 1 digit, cold junction - solid state automatic compensation, power - dry cell 9 v dcbattery low - indication availablepower consumption - 400 m watts