Fatehgarh Sahib, Punjab, India
Our Products
Reduction gearboxes are used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a connected set of rotating gears by which power is transmitted or motion or torue is changed. We can manufacture and supply single stage, double stage or multistage gearboxes having single and multiple outputs as required.
From Low Speed to High Speed, technicalities of our Reduction Gearboxes are Apart From Rolling Mill Gear Boxes, We also manufacture the gear boxes according to the customer requirement, if relevent data is provided.
A reduction gear box is used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a connected set of rotating gears by which power is transmitted or motion or torque is changed. We can manufacture and supply stage, double stage or multistage gear boxes having single outputs as required.
Pinion gearboxes are used to reduce an input speed to a slower output speed. It is a wheel work consisting of a connected set of rotating gears by which force is transmitted or motion or torque is changed
We are manufacture and supply double and triple output shafts are technicalities of our Pinion Gear Boxes are:
| Casing / Housing / Structure Material | Steel Fabricated |
|---|---|
| Gear Material | Forged and forged blank EN-9, EN-19, EN-24 Steel |
| Gear Type | Spur, Single & Double Helical Gears upto 2500mm Dia |
| Normal Input Load Range | From 200 H.P. upto 2000 H.P. Drives |
| Maximum Peak Load | 6000 H.P. |
| Size Range | 150mm PCD upto 750mm PCD |
| Speed | 50 RPM to 1500 RPM |
| All Shafts Material | Forged Class-IV |
| Anchor / Foundation bolts | |
Special Features
|
|
| From Low Speed to High Speed, technicalities of our Reduction Gear Boxes are:- Casing / Housing / Structure Material Steel Fabricated | |
| Gear Material | Forged and forged blank EN-9, EN-19, EN-24 Steel |
|---|---|
| Gear Type | Spur, Single & Double Helical Gears upto 2500mm Dia |
| Normal Input Load Range | From 200 H.P. upto 2000 H.P. Drives |
| Maximum Peak Load | 6000 H.P. |
| Size Range | 150mm PCD upto 750mm PCD |
| Speed | 50 RPM to 1500 RPM |
| All Shafts Material | Forged Class-IV |
| Anchor / foundation bolts | Carbon Steel |
