Our Products
Jindal Plasma Extractor is designed to extract blood component from the centrifuged bags. The spring loaded front panel applies pressure on the collected bag causing the liquid to contain in transfer bag.
Sturdy construction of the plasma expresser makes it durable, reliable, easy to use & portable. The expresser is available in both manual & automatic versions.
Model No. | JPE-01 | JPE-02 |
Sensor | -- | Infrared |
Clamping Control | Manual | Motor Activated |
Pressure Plate | Plexi Glass | Plexi Glass |
Alarm | -- | Audio Visual |
Jindal Seed Germinator is designed for conducting various experiments on variety of seeds under different parameters of temperature, humidity etc. Atmospheric environment can thus easily be simulated within the laboratory to perform different experiments without going into the field, by creating desired conditions of temperature & humidity in the chamber of seed germinator.
It is of double walled construction. Inner chambers are made of Stainless Steel & outer cabinet is made of Mild Steel sheet duly powder coated. High density Insulation is provided between inner chamber & outer body to minimise heat loss
Both the chambers have temperature range from 5°C to 50°C ± 1°C which are controlled by two individual digital temperature indicators cum controllers.
The temperature below ambient is achieved by highly efficient air cooled refrigeration system with complete accessories fitted at the bottom of the instrument.
The door is also provided with a viewing glass window to view the germination of seeds inside the chamber without disturbing the parameters inside the chamber. Forced air circulation ensures uniform temperature inside the chamber. The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval.
Humidity is achieved by a highly efficient ultrasonic humidifier. This humidification system ensures minimal variation in temperature while the humidity is being generated. S.S. Water reservoir at the bottom enables to generate the humidity from 60-95% controlled by humidistat.
The control panel consists of a digital temperature indicator cum controller, humidistat, indicators & On/Off switch. The seed germinator is supplied complete with SS perforated trays.
The instrument is designed to operate on 220V single Phase AC Supply.
W X H X D |
555 X 910 X 605mm |
The tissue floatation bath is used for precise control of different samples at constant temperature. It is ideal for tissue culture, enzyme reactions fermentations tissue section processing etc. The bath is ideally suited for preparing distortion less and wrinkle free tissue specimens. Its round, double walled, inner chamber made of aluminium and outer body made of mild steel duly powder coated, with wide enough rim for drying the wet slides. Temperature is controlled by capillary type thermostat, from ambient to 80C with an accuracy of 1C.
The instrument is supplied complete with pilot light, cord and plug.
The instrument is designed to operate on 220 V AC supply (Model with 110V also available).
Chamber Size:
Dia Depth
210 75
250 X 125
We are manufacturer and suppliers ofColony Counter. These Colony Counters are designed to provide light effects for multipurpose viewing in Bacteriology, Virology & Mycology Labs. The colony counter is an ideal instrument for counting bacterial & mould colonies in culture work. It provides uniform glare free illumination to minimise the strain on eyes and clearly defines even small colonies. A 100 mm dia lens covers the entire illumination field and its magnification assures highly accurate results. Counting plate with standard Wolfhugel ruling ensures clearly differentiated and sharply defined colonies. The counter is supplied complete with counting plate, lens.
Our colony counter is fitted with automatic LED digital display. It minimise the strain of counting. Each touch of marking Pencil on the Petri dish increments the colony count by '1' and the glowing LED digital display depicts the total colony count, thus relieving the technician from the tedious task of counting and eliminating the chances of error.
The instrument is provided with a manual RESET of digital display, ON/OFF switch, counting pencil, cord and plug.
The instrument is designed to operate on 220 V AC supply (Model with 110V also available).
This type of rectangular heating plate is used for continuous heating up to 350C. The body is made of P.C.R.C sheet duly powder coated. The top rectangular cast iron plate has insulated elements.
The hot plate is designed to operate on 220V AC supply (Model with 110V supply are also available).
Size | Rating | Temp. Control |
25X30X15cm(10”X12”X6”) | 1.2 Kw. | Temp. control by energy regulator |
25X40X15cm(10”X16”X6”) | 1.5 Kw. | Temp. control by energy regulator |
30X45X15cm(12”X18”X6”) | 2.0 Kw. | Temp. control by energy regulator |
45X60X15cm(18”X24”X6”) | 3.0 Kw. | Temp. control by energy regulator |
25X30X15cm(10"X12"X6") | 1.2 Kw. | Temp. control by microprocessor based PID control |
25X40X15cm(10"X16"X6") | 1.5 Kw. | Temp. control by microprocessor based PID control |
30X45X15cm(12"X18"X6") | 2.0 Kw. | Temp. control by microprocessor based PID control |
45X60X15cm(18"X24"X6") | 3.0 Kw. | Temp. control by microprocessor based PID control |
The Body is made of P.C.R.C. sheet duly powder coated. The heating plate is fitted with coil type heating element. The heating plate will be powder coated.
The instrument is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).
Size | Rating | Temp. Control |
Single Coil | 1.25 Kw. | Temp. control by energy regulator |
Single Coil | 1.25 Kw. | Temp. control by microprocessor based PID control |