Delhi, India
Our Products
Our Complete range of products are Cryostat Microtome, Manual Rotary Microtome, Semi Automatic Microtome (, Fume Hood and Automated Plasma Thawing Bath.
Cryostat Microtome provides a rapid and easy means for the sectioning of natural tissue from 2 to 20 microns in step of 2 microns without distortion for high quality microscopic examination. These are specially designed for clinical and research operations. Sections have the high resolution of cytological details required for pathological diagnosis, histochemistry, fluorescence, biochemistry, microscopy etc. Technique is simple and easy to learn. To withstand condensation inside the chamber, in built Rotary Microtome is made of entirely rustproof material fitted with anti roll device to avoid curling of sections. Plastic plate is adjustable in all directions.
The robust ergonomically designed cryostat ensures relaxed efficient working conditions. We are leading manufacturer and suppliers of Cryostat Microtomes.
Cryostat Microtome provides a rapid and easy means for the sectioning of natural tissue from 2 to 20 microns in step of 2 microns without distortion for high quality microscopic examination. These are specially designed for clinical and research operations. Sections have the high resolution of cytological details required for pathological diagnosis, histochemistry, fluorescence, biochemistry, microscopy etc. Technique is simple and easy to learn. To withstand condensation inside the chamber, in built Rotary Microtome is made of entirely rustproof material fitted with anti roll device to avoid curling of sections. Plastic plate is adjustable in all directions.
The robust ergonomically designed cryostat ensures relaxed efficient working conditions. We are leading manufacturer and suppliers of Cryostat Microtomes.
The cryostat microtome offers the performance, ease-of-use and versatility to make it the ideal instrument in all types of laboratory work. The Cryostat Microtome is used for cutting thin sections of fresh, frozen material.
Cryostat temperature ranges up to -40C which can be set by a highly accurate microprocessor based PID digital temp. Indicator cum controller. This low temperature is obtained by a highly efficient refrigeration unit.
The cryostat microtome also incorporates an inbuilt hot gas time controlled defrosting system. This helps in heating the work area for cleaning purposes. The outer body of the cryostat microtome is made of mild steel duly powder coated. The spacious inner chamber is made of polished stainless steel. Sliding acrylic transparent door is provided.
It is a top opening design for working access to microtome. A lamp with an in built magnifying glass is also provided which switches on automatically whenever door opens to facilitate easy visibility. Microtome hand wheel provided outside the chamber on right hand side for easy operation.
A self contained drainage system ensures that condensate and defrost fluids are collected in a convenient container positioned at the front of the instrument. This allows controlled collection and disposal of potentially contaminated fluids thus reducing the potential emission of pathogens into the laboratory environment. Motorised hand wheel movement is a standard feature with Single/Multiple cut mode.
Four castor wheels fitted at bottom provide easy mobility for use in various locations and for storage when not in use.
Supplied complete with rustproof in-built microtome, refrigeration unit, transparent door, door cover, four demountable specimen holders, one bottle of low temperature oil and one microtome knife 120 mm long with back and handle in wooden box, cord and plug. Suitable to work on 220 V, single phase, 50 Hz, AC supply.
Jindal precision manual rotary microtome is the most advanced sectioning equipment for medical colleges, universities, research laboratories, hospitals and educational institutions. The internal mechanism and knife holder rest on a heavy and rigid base to render a shake proof operation. We are leading manufacturer and suppliers ofManual Rotary Microtome.
The latest designed light weight protective cover is hinged to the base and swings back so that the interior parts will be completely exposed for convenient cleaning, lubrication & setting etc. The feed mechanism is dependent on the vertical movement of the object block. With every complete revolution of the counter balanced drive wheel, the feed pawl engages precisely on to the teeth of the ratchet gear which moves forward and advances the object holder through a cone, inclined plane mechanism in such a precise increments that tissues can be sectioned even in one micron thickness. Well designed features for precise and accurate serial sectioning, with feed setting visible from front, improved locking device and counter balanced wheel. Feed is adjustable from 1 to 50 microns in steps of 1 micron. Free up and down movement of object clamp. Automatic restricted total excursion of 28 mm by disengaging the feed mechanism to prevent jamming.
Ball and flange object clamp provides flexible orientation of object piece. It takes specimen up to 3227 mm on stem of block holders. Knife holder allows for 120 mm on 180 mm long knife. Cutting angle is adjustable through 30 degrees. Two levers release knife holder for resetting angles and a third lever releases the entire assembly for movement on slide way to adjust horizontal distance from object.Latest cam system eliminates the conventional cord system for feeding, resulting in better section cutting and improved efficiency of the machine.Supplied complete with one knife 120 mm long with back and handle in wooden box, 2 block holders, One bottle of lubrication oil, dust cover
Spare Accessories
The Jindal semi automatic microtome characterizes a great combination of cost effective competence and user comfort. Semi Automatic microtome is the instrument of choice for clinical histology and histopathology applications.
These are used to produce thin sections of specimens of different hardness in both routine and research applications in biology, medicine and industry.
Manual sectioning is enhanced by the high precision motorized specimen feed which provides efficient operation with utmost section reproducibility
Well Located Storage Area
An incorporated storage tray makes sure that certain subsidiary tools are in hand at all times.
User Friendly Operation
All functions are controlled via soft touch buttons located on the side of the block holder.
The fume hood is an important safety device in any laboratory. Fume Hoods are recommended for exhaust from the hood working area, of gases, vapour, toxic particles, odour to improve working environment of people who regularly handle toxic substances. These reduce personal exposures and odour level in the laboratory. These are designed to exhaust toxic or otherwise harmful vapours etc., for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the work area and expelling it into the atmosphere and preventing the fumes from escaping into the room. These are recommended for various laboratories like Bio-Chemistry, Pharmaceutical units, printed circuit etching/cleaning etc. These are capable of handling corrosive fumes of sulphuric and hydrochloric acids etc. If work-area walls are lead-lined (Optional), it can be effectively used for Radio-Isotopic applications.
Construction
The main body of the fume hood is made of Mild Steel. The working table top is of stainless steel sheet. A small S.S. Sink, water tap and connections for inlet and outlet of water are a standard feature. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. The unit is fitted with fluorescent light & a gas cock for gas/air supply. Two/Three drawers & storage compartments are provided under the working table. The front facing panel is fitted with 15/5 Amp. socket with switches for exhaust system and fluorescent tubes.
Motor & Blower Assembly
An exhaust centrifugal fan of 0.75 HP, 1440 RPM (Crompton) is installed at the top to throw out the toxic fumes.
Working Table Size
4' 2.5' 2'6' x 2.5' x 2'5' x 3' x 2'Other sizes can be manufactured as per Lab Design
Power Requirement
The instrument is able to work on 220V AC Supply
Optional Accessories
The Jindal Plasma Thawing Bath is a tabletop model, for quick thawing of plasma at 37C. The automated plasma thawing system uses controlled temperature to ensure the safety of your plasma.
It is convenient and easy to operate, allowing you to load, set the required temperature and walk away. The compact size of the thawing bath conserves space on your bench top while allowing you to thaw up to 2 -8 bags of plasma.
Cabinet Construction
High density CFC Free Poly Urethane Foam insulated cabinet with corrosion resistant stainless steel interior and the outer body made of mild steel duly powder coated.
Features
- Polished stainless steel tank and baskets
- Powder coated exterior
- Chamber volume and high capacity heater enhance heat transfer efficiencies for faster thawing
- Quick connect drain system efficiently empties the chamber for easy cleanup
- Large opening for easy cleaning
Special Features
| atalogue No | PTS-2 | PTS-4 | PTS-8 | PTS-16 |
| Capacity | 2 Bags | 4 Bags | 8 Bags | 16 Bags |
| Volume | 8 Ltrs | 16 Ltrs | 32 Ltrs | 60 Ltrs. |
| Temperature | 37 °C | 37 °C | 37 °C | 37 °C |
| Accuracy | + 0.1°C | + 0.1 °C | + 0.1°C | + 0.1°C |
| Input Voltage | 220/110 V AC | 220/110 V AC | 220/110 V AC | 220/110 V AC |
| Suitable Fluids | Distilled Water | Distilled Water | Distilled Water | Distilled Water |
Refrigerated Centrifuges are useful for centrifugation of temperature sensitive material and find applications in routine and research work in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical laboratories. They are also used in DNA & RNA extraction in molecular biology and endocrinology.
The user has choice of different types of control, i.e. Electronic Controls or Microprocessor based Controls. User can select models as per their requirements from - high volume low speed Centrifuge models, low volume high speed centrifuge models in table top design & a compact high-speed high volume floor standing centrifuge.
Our centrifuges are Electronic controlled & high end series Centrifuges are microprocessor controlled centrifuges with temperature programming facility for temperature sensitive samples. All the Centrifuges have soft touch keypads for fast and accurate setting of run parameters. Basic runs are easy with setting of speed, time, temperature, brake, Press 'start' key and the machine does the rest for you.
The highly efficient refrigeration system controls the temp. as low as -20C /-40C.
Induction motor with microprocessor based drive & unique microprocessor ensures accurate speed setting. Over current overheating safety cut off circuit is provided for motor protection. Safety lid interlock on the centrifuge ensures that the rotor does not run with cover open. The microprocessor will have inbuilt memory for standard tests.
Advanced manufacturing techniques are used for resilient mounting of heavy-duty brushless induction motor resulting in low level of vibration and noise.
The instrument is designed to operate on 220V Single Phase AC Supply (Model with 110V also available).
| Model | Cap/ml | RPM | RCFXg |
| RH 37 | 12 x 25 | 7000 | 7000 |
| RH 38 | 6 x 200 | 7000 | 12000 |
| RH 39 | 8 x 100 | 7000 | 12000 |
| RH 40 | 12 x 50 | 7000 | 12000 |
| RH 41 | 36 x 15 | 7000 | 12000 |
| RH 42 | 4 x 100 | 14000 | 12000 |
| RH 43 | 8 x 50 | 13500 | 12000 |
| RH 44 | 6 x 50 | 14500 | 16000 |
| RH 45 | 4 x 50 | 16000 | 16000 |
| RH 46 | 8 x 25 | 15000 | 16000 |
| RH 47 | 6 x 25 | 16000 | 16000 |
| RH 48 | 24 x 1.5 | 18000 | 25500 |
| RH 49 | 24 x 1 | 18000 | 25500 |
| RH 50 | 24 x 0.5 | 18000 | 25500 |
| Model | RC-50 | RC-130 | RC-160 | |
| Max. Speed | RPM | 5000 | 13000 | 16000 |
| Max. Tube Size | ml. | 5 | 5 | 5 |
| Max. Capacity | ml. | 36 | 36 | 36 |
Jindal Egg Incubator is elegantly designed, fabricated and tested to suit various applications in ever growing field of Agriculture Colleges/Universities, small and big potters, Hotels etc. for easy and convenient handling and hatching operation in research work.
Temperature range is from ambient +5C to 70C 1C controlled by thermostat.
Jindal egg incubators are the most versatile and highly reliable for egg incubation.
Outer body is made of MS sheet, duly powder coated. It is highly insulated. The inner chamber is made of aluminium or Stainless steel sheet. Door is with double glass viewing windows to facilitate easy inspection of interior
Control Panel
The control panel consists of a thermostat control knob, pilot light, main ON/OFF switch etc.
Power Supply
The incubator is designed to operate on 220V Single Phase AC Supply.
Capacity
This combined module consists of two chambers. The top chamber of the unit work as Oven Universal and bottom chamber work as Incubator Universal. The inner chamber is made of anodized aluminium or Stainless steel and outer made of mild steel duly powder coated. The temp. is controlled by two separate digital indicators cum controllers. The instrument is supplied with forced air circulation fan for uniformity in temperature.
The machine is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).
| W H D |
| 350 350 350 mm(14X14X14) |
| 450 450 450 mm(18X18X18) |
| 450 600 450 mm(18X24X18) |
| 600 600 600 mm(24X24X24) |
JINDAL CO2Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature / Co2on human tissues. The incubator incorporates SS 304 Construction and Copper enriched stainless steel alloy interior surfaces to eliminate contamination sources, mitigate the effects of airborne contaminants introduced through normal use and provides high degree of Germicidal Protection. Laboratories and medical professionals, world over, rely on our Co2 Incubators. And, therefore, we are considered topCO2 incubator manufacturerandCo2 incubator suppliers.
Jindal'sCO2Incubatoruses Direct Heat / Air Jacketed Heating System which surrounds the inner chamber walls combined with natural convection airflow that radiate wall heat through thermal conduction. This technique achieves accurate, uniform and highly responsive temperature control within the chamber.
The Dual Beam Infrared Co2system is linked to microprocessor controller with a sophisticated PID algorithm. This ensures Ultra-Fast recovery without overshoot and accurate CO2averages even with frequent access with multiple door openings.
All instruments functions including the temperature, Co2% and Humidity % of the incubator are programmable with a facility for a selectable alarm for each parameter. The easy to read 4 lines Liquid Crystal Display (LCD) with all set and process temperature, CO2% and Humidity % and visual alarm for each parameter provides stabilized and accurate controls.
Optional Ultra Protection Systems
The Jindal CO2incubator (Carbon Dioxide Incubator) also comes with a programmable Ultraviolet Lamp, isolated from cell cultures, that sterilizes conditioned air and humidity water reservoir to avoid contamination without disturbing cell cultures in vitro.
Rapid Response "Class 100 product" affects the Yields and Reliability by airborne contamination costing valuable time and money. Class 100 HEPA Filter Flow System air quality provides an ideal culturing environment.
At a Glance:
The water bath is single walled, made of thick stainless steel complete with concentric rings. This water bath is used for evaporating liquids like alcohol or for melting solids such as agar. Concentric rings can be removed to accommodate containers of various sizes. The concentric rings are chrome plated. The temperature is controlled by capillary type thermostat from 5C above ambient to 90C.
The instrument is supplied complete with two indicator lamps, concentric rings, ON/OFF Switch, Cord & Plug but without thermometer.
The water bath is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).
Jindal Serological Water baths are versatile enough to handle any clinical procedure, incubation, inactivation, agglutination, as well as most serological, pharmaceutical, biomedical procedures
Construction
Our Serological Water Baths are sturdy with double walled construction. The complete inner chamber is made of highly polished stainless steel & the outer body is made of mild steel duly powder coated. The inner chamber is insulated from the outer atmosphere with special grade glass wool insulation. The Water Bath is provided with a drain plug to facilitate easy emptying and cleaning of the inner chamber whenever necessary. Pyramidal shaped cover and perforated removable diffuser are standard accessories.
Heating Elements
Immersion heating elements made of high grade materials are fitted at bottom with different ratings for different sizes.
Temperature Control
Temperature is generally controlled by capillary type THERMOSTAT from ambient to 95C 1C. Temperature control knob is graduated in centigrade degrees.
Control Panel
The equipment is provided with a panel having a thermostat control knob, ON/OFF switch, two pilot lamps, cord and plug.
Power Requirement
The water bath is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).
Size of inner chamber
Optional Accessories
It is useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks.
Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. The shaker is particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, Single phase, 50 Hz. AC supply.
Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc.
Construction
Robust Construction. Outer cabinet is made of M.S. Sheet, duly powder coated. Inner chamber is made of high polished stainless steel/aluminium. It has provision for allowing wide range of shelf positions & spacing. SS/Aluminium trays are also provided. Chamber is duly insulated to minimise heat loss. Two doors are provided. Outer door is insulated and is fitted with gasket for air tight closing for no temperature loss. Door is provided with lock and key. Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without disturbing the thermal conditions.
Temperature Control
The temp. of the incubator is controlled by a PID digital temperature controller cum indicator, range from 5C to 60C 0.5C. Hermetically sealed, high performance compressor works efficiently to lower the inside chamber temperature. Heating elements are placed in the path of moving air duly insulated from the body. Evaporator coils also lie in the air circulation path. A forced air type circulation is kept inside the chamber with the help of fans to keep uniform temp. throughout the inner chamber. The incubator is also fitted with a door operated lamp for illumination inside the chamber. Caster wheels are provided at bottom for easy mobility.
Control Panel
All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting keys allow the user to set any desired temp.
Salient Feature
Jindal BOD INCUBATOR switches from heating to cooling and vice versa irrespective of the ambient temperature because of its unique design and thus is capable of working without any user intervention. Supplied complete with 3 shelves of anodized Aluminium or Stainless Steel as per the chamber, cord and plug, to work on 220 Volts, Single phase, 50 Hz, AC supply.
Jindal incubators are the perfect choice for reliable day to day operation in variety of uses. Drying of slides, paraffin embedding, and tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and incubation of hydroxy steroids.
Construction
Jindal incubators are sturdy, with double walled construction with complete inner chamber made of Anodized Aluminium or Highly Polished Stainless Steel. Outer chamber is made of Mild Steel Sheet, duly powder coated. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber fabricated with ribs for adjusting shelves to convenient height. Supplied with 2 or 3 removable shelves. SHELVES are made of fully Anodized Aluminium Sheet or Polished Stainless Steel Sheet as per chamber. Door is insulated & fitted with heavy hinges. Door has Double glass window which facilitate inspection of samples without disturbing the thermal conditions. Heating elements, made of high grade imported nichrome wire are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.
Temperature Control
Temperature is controlled by capillary type thermostat from ambient to 80C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber temperature.
Ventilation
Air ventilators are provided on both sides at top to flue away any gas or fumes.
Control Panel
The equipment is provided with a panel having a thermostat control knob, ON/OFF switch and two pilot lamps.
Power Requirement
Supplied with cord and plug & designed to operate on 220 V single phase, 50 Hz, AC supply. (Model with 110V supply is also available).
Elegantly designed, fabricated and tested to suit various applications in ever growing field of Agriculture Colleges/Universities, small and big potters, Hotels etc. for easy and convenient handling and hatching operation in research work.
Temperature range is from ambient +5C to 70C 1C controlled by thermostat.
Jindal egg incubators are the most versatile and highly reliable for egg incubation.
Outer body is made of MS sheet, duly powder coated. It is highly insulated. The inner chamber is made of aluminium or Stainless steel sheet. Door is with double glass viewing windows to facilitate easy inspection of interior.
The chamber trays are provided with manual tilting mechanism.
Water tank is provided at bottom. It has small windows for filling water in it. Water heater is fixed in the tank. Air circulating fan ensure uniform temperature inside the chamber. Incubation in generally done at 37C or 56C. Temperature is controlled by thermostat. L-shaped thermometer provided on top front of cabinet.
Control Panel
The tilting knob is provided on control panel, along with thermostat control knob, pilot light, main ON/OFF switch etc.
Working Principal
As soon as the machine is put on the water is heated by water heater and the generated steam comes out through perforation on bottom of inner chamber and is sucked by air circulating fan through perforated egg trays. This air the recirculated and temperature is maintained in the chamber.
Power Supply
The incubator is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).
Capacity
Jindal Hybridization incubators are designed to fulfill the requirements of day-to-day laboratory work. The durable high precision rotating convection oven is used for blot hybridization & other applications.
Construction
The inner chamber is made of heavy gauge Stainless steel sheet & the outer body is made of Mild steel sheet duly powder coated. The chamber is insulated from outer body with glass wool insulation to prevent thermal losses. The double pane glass door is duly insulated to prevent loss of temperature. The door consists of a mechanical door latch for locking purposes.
Temperature & Speed Control:
The chamber consists of a motor blower assembly to maintain uniform temperature distribution throughout the chamber. A digital microprocessor based PID temperature indicator cum controller controls the temperature with a temperature range of Ambient +50C to 1000C.
A speed regulator linked to DC motor controls the speed from 2 to 20 RPM. The digital speed indicator indicates the actual speed.
The instrument is designed to operate on 220V 50Hz Single Phase AC Supply.
Jindal double walled water bath is used for evaporating liquids like alcohol or for melting solids such as agar. The concentric rings can be removed to accommodate containers of various sizes. The water bath is double walled with the inner chamber made of Stainless Steel and outer wall made of thick mild steel sheet duly powder coated. The inner chamber is insulated from the outer atmosphere with special grade glass wool insulation. The concentric rings are chrome plated. The temperature is controlled by capillary thermostat from 5C above ambient to 95C.
The water bath is supplied complete with two indicator lamps, concentric rings, ON/OFF Switch, Cord & Plug but without thermometer. The water bath is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).
Jindal high precision water bath is a table top model with double walled construction is ideally suited for experiments or research work requiring very precisely controlled temperature with an accuracy of 0.1C of digital temp. Controller.
The inner chamber is made of thick stainless steel sheet & is 100% leak proof and the welding itself is ground properly to give a smooth inside working surface. The outer wall consists of thick mild steel sheet which is duly powder coated. The inner chamber is insulated from the outer atmosphere with high grade glass wool to ensure constant temperature and minimum loss of heat.
It is provided with a glass window for an easy inside view. A speed controlled stirrer is provided for continuous stirring of the medium to ensure uniform temperature throughout. The heating mechanism comprises of sets of heaters corresponding to faster and slower heating. The later are meant for very precise control of temperature. The temperature is controlled from ambient to 100.0C 0.2C by a highly accurate microprocessor based PID temperature indicator cum controller.
The bath is designed to operate on 220V Single Phase AC Supply.
W X H X D430 230 265 mm
Jindal circulatory water baths are specially designed for the bacteriological & varied applications requiring incubation as well as general tests & procedures in variety of research & testing laboratories.
The water bath consists of a TIG welded leak proof chamber insulated from the atmosphere with high grade glass wool. The outer body is made of galvanised steel sheet duly powder coated. The temperature is controlled through a thermostat with an accuracy of 1 C indicated by an L shaped thermometer. Water inlet and outlet valve connected to high performance water circulation pump with speed control regulator.
The bath is designed to operate on 220V Single Phase AC Supply.
Jindal Plant Growth Chamber is state-of-the-art equipment for plant growth and animal studies. It is used in many research, education and agricultural industries. The chamber is used for a material test in a constant climate, specifically the stability test in accordance with the ICH (International conference on halmonisation of technical requirements for registration of pharmaceuticals for Human use). The combination of technology for heating, cooling and dehumidifying, as applied by the Jindal New Modular Plant Growth chamber is so far unique on the market. The inbuilt provision for light, temperature and humidity are made to test plant growth and analyse their flowering cycle.
Construction
The inner chamber is made of Stainless steel and the outer body is made of mild steel duly powder coated. A see through window is provided for inspection of plants without disturbing the thermal conditions. Adjustable stainless steel trays to place the samples are provided.
Insulation
The inner stainless steel chamber is insulated by high density thick polyurethane foam insulation to prevent thermal losses.
Heating
The heating is done by finned heaters to maximize heat exchange process and to achieve the set temperature in a short time interval.
Cooling
The cooling is done by a highly efficient hermetically sealed refrigeration unit with air cooled condenser & CFC free eco friendly refrigerant to achieve set temperature in a short time period.
Illumination
Provision from 10, 000Lux to 50, 000Lux illumination is done with a mixture of incandescent lamp and fluorescent light to give effect of day light.
Air Circulation
Highly efficient forced air type circulation with motor blower assembly is provided to maintain uniform temperature inside the chamber.
Fully Automatic Microprocessor Control
The new modular design of plant growth chamber is integrated with a multifunctional fuzzy controller with an integrated self diagnosis system and high quality platinum sensors. The fuzzy controller allows precise adjustments of temperature/humidity constellations, greater stability of the variables over long periods, which are of crucial significance.
Technical Specifications
Chamber Volume
Other capacities as per customer's requirement are also available.
Optional Features
JINDAL CO2Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature / CO2on human tissues. The incubator incorporates SS 304 Construction interior surfaces with rounded corners to eliminate contamination sources, mitigate the effects of airborne contaminants introduced through normal use and provides high degree of Germicidal protection. Four stainless steel height adjustable & removable shelves are provided with removable humidity reservoir to provide humidity up to 95%RH. The chamber consists of a 25mm access port for calibration & other uses. The outside body is made of Steel sheet duly powder coated for rust free performance. The complete incubator is mounted on castors for easy movement. The CO2incubator has a double door design. The front door is duly insulated fitted with heavy hinges with mechanical latch & key. The inner glass door has separate airtight doors to prevent condensation. The inner glass door consists of mechanical latch to provide perfect seal against the silicone gasket. The user can view the specimens inside without disturbing the vital conditions. Independent door heater prevents condensation. Jindal's CO2Incubator uses six sided Direct Heat steam jacket fan-less gentle convection Heating System which surrounds the inner chamber walls. This technique achieves accurate, uniform and highly responsive temperature control within the chamber with no overshoot. This eliminates vibration & reduces sample evaporation.
Chamber Capacity Available
. 80Ltrs.
. 120 Ltrs.
. 180 Ltrs.
. 300 Ltrs.
. 450 Ltrs.
Other chamber capacities can also be manufactured as per the customer requirement.
Accessories
. UPS with maintenance free battery backup
. CO2gas cylinder, double stage regulator, rubber hose & clamps
. N2gas cylinder, double stage regulator, rubber hose & clamps
We are leadingmanufacturerandsuppliersofCo2 Incubator. Jindal Co2 Incubators are used with with confidence in laboratories and hospitals world over.
JINDAL floor model incubator shakers are designed for day-to-day laboratory routine work. Construction: The external body of the incubator is made of galvanized steel sheet with baked on finish having powder coating & the internal chamber is made of high-grade polished corrosion resistant double pane insulated stainless steel. The chamber is insulated with high density Polyurethane insulation to prevent thermal losses. The complete shaker is mounted on a heavy angle frame structure on all the sides & consists of castor wheels cum jack system for easy movement. A front opening door with glass window facilitates the inspection of samples without disturbing the temperature. The door consists of attachable light shielding plate for safety. The unit is provided with 02 Nos. removable stainless steel shelves. Forced air circulation inside ensures uniform temperature distribution throughout the chamber.
The shaker consists of triple eccentric drive mechanism with 25mm stroke displacement. A brushless induction motor along with a feed back signal provides accurate speed.
Heating is done by finned heaters (250 Watts) & are placed in the air flow duct.
The temperature range is from Ambient +5DegC to 80DegC controlled by a digital microprocessor temperature indicator cum controller within an accuracy & stability of 0.5DegC. The heaters linked to the microprocessor run on the PID function. The temperature can be set in the inc./dec. of 0.1DegC. The shaking speed can be adjusted from 10 to 400RPM 1RPM within increments of 1rpm & is controlled by the precise microprocessor controller. A bright digital LCD 7 multicolor touch screen displays & monitors all the set parameters including temperature, Speed & time (1min to 999hr). The operator can program multistep programming (4steps) in each program. Built in self-diagnostic system along with over & under voltage protection system switches off the system in case of fault. Built in automatic shaking speed adjustment in case of unbalanced load/vibrations/ shocks.
Independent alarm system (audio-visual) warns if the temperature deviates 1DegC (adjustable) from the set point & speed varies 2 rpm from the set speed (or even in stalled platform). An audio-visual alarm at the end of digital timing cycle is an added advantage. Bright LCD displays temperature, time & shaking speed digitally simultaneously on the same screen. The microprocessor controller is designed to retain parameters during power failure & restarts the unit automatically. Built in independent over temperature protection & cut off system. Built in data logging can be done with on board USB port by using a pen drive & the complete system can be remotely operated through a computer by using on board Ethernet port. An internal fluorescent light provides better visibility of samples. The chamber also consists of a built in rust free power socket for efficient operation.
The 100 Ltr capacity chamber consists of 18X18 universal platform to hold various spring based clamps. The platforms can be interchanged easily as per the operators requirement.
The shaker also has a static incubation shelf facility for incubation of petri plates apart from the shaking & is provided with 2 shelves. Stainless steel clamps to hold various flask sizes 50mL, 100mL, 250mL, 500mL, 1Ltr. are provided along with the machine.
The instrument is designed to operate on 220V Single Phase AC Supply with over current protection system.
Accessories: Voltage Stabilizer of suitable rating
