Smiththerm Band Heaters are computerized designed and manufactured to your specifications. Only the highest quality materials are used for optimal performance.

SmithHeat Strip Heatersare manufactured to your custom specifications. Our strip heaters feature a high temperature oxidation metal sheath and high grade mica insulation resistant to moisture and high temperatures. Nickel/Chromium resistance wire evenly wound provides for uniform and reliable heat distribution.

We offer bobbin heater. Smithheat ceramic bobbin heaters are made with sheathed and without sheathed material. The sheath material ranges from nickel plated mild steel, copper, nickel plated copper to stainless steel. Ceramic bobbin heater consists of 8020 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end.

Smithheat cartridge heaters consist of a cylindrical stainless steel tube which provides high corrosion prevention and there is a heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. In order to avoid short-circuit, the cartridge heater is filled with magnesium oxide and compressed afterwards.

Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. .There are numerous advantage of etched foil heating element such as rapid heating, reliable and durability for almost every applications. It consists of etched foil resistive element which is laminated between two layers of insulation material. It can be shaped in any design and can be easily fitted due to its flexibility and design.

Etched foil heatershave standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. Some hard to heat application, however require custom heaters with flexibility, resistance to wear reliability and cost effectiveness. With no order minimum and the ability to choose material, size, voltage, wattage, cutouts, attachments options and built in controlling options. Etched- foil heaters are so personalized that virtually any application could be satisfied.

Applications :-

Storage Tanks, Low temperature ovens, Heat Tracing systems, Humidity control systems, Heated tabletops, Food service equipments, Wall radiant Heating, Epoxy Curing Equipment, process Vats and dip tanks, Water and feed throughs, conveyors, refrigerator Defrost, Fluid line Freeze protection, Medical and laboratory devices, Satellite and communications, alternative to direct immersion.

SmithHeat Ceramic Bobbin Heatersare made with sheathed and without sheathed material. The sheath material ranges from nickel plated mild steel, copper, nickel plated copper to stainless steel. Ceramic Bobbin Heater consists of 80/20 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end.Ceramic Bobbin Heater offers a large surface area to heat liquids or semi-solid materials such as water, oil, wax, fats, and bitumen. These heaters are mainly used for direct heating of air and indirect heating of liquids and gases where the element is fitted into a pocket in the process tank or system so that the element may be replaced without draining down the system or vessel.

Installation :-

We manufacture Ceramic Bobbin Heater for any voltage or wattage within manufacturing limits. Heater can be supplied with suitable mild steel or stainless steel pockets and mounting flanges or bosses is required.

The element allows easy installation and handling. They are normally manufactured for horizontal mounting, but may be specially designed constructed for vertical installation. These are energy efficient as 100% of the heat is generated within the solution. The versatility is that this type of heating unit gives simple, low cost installation.

We offer foil heater. Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. Some hard to heat application, however require custom heaters with flexibility, resistance to wear reliability and cost effectiveness. With no order minimum and the ability to choose material, size, voltage, wattage, cutouts, attachments options and built in controlling options.

Smiththerm Band Heaters are computerized designed and manufactured to your specifications. Only the highest quality materials are used for optimal performance.

SmithHeat Strip Heatersare manufactured to your custom specifications. Our strip heaters feature a high temperature oxidation metal sheath and high grade mica insulation resistant to moisture and high temperatures. Nickel/Chromium resistance wire evenly wound provides for uniform and reliable heat distribution.

We offer bobbin heater. Smithheat ceramic bobbin heaters are made with sheathed and without sheathed material. The sheath material ranges from nickel plated mild steel, copper, nickel plated copper to stainless steel. Ceramic bobbin heater consists of 8020 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end.

Smithheat cartridge heaters consist of a cylindrical stainless steel tube which provides high corrosion prevention and there is a heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. In order to avoid short-circuit, the cartridge heater is filled with magnesium oxide and compressed afterwards.

Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. .There are numerous advantage of etched foil heating element such as rapid heating, reliable and durability for almost every applications. It consists of etched foil resistive element which is laminated between two layers of insulation material. It can be shaped in any design and can be easily fitted due to its flexibility and design.

Etched foil heatershave standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. Some hard to heat application, however require custom heaters with flexibility, resistance to wear reliability and cost effectiveness. With no order minimum and the ability to choose material, size, voltage, wattage, cutouts, attachments options and built in controlling options. Etched- foil heaters are so personalized that virtually any application could be satisfied.

Applications :-

Storage Tanks, Low temperature ovens, Heat Tracing systems, Humidity control systems, Heated tabletops, Food service equipments, Wall radiant Heating, Epoxy Curing Equipment, process Vats and dip tanks, Water and feed throughs, conveyors, refrigerator Defrost, Fluid line Freeze protection, Medical and laboratory devices, Satellite and communications, alternative to direct immersion.

SmithHeat Ceramic Bobbin Heatersare made with sheathed and without sheathed material. The sheath material ranges from nickel plated mild steel, copper, nickel plated copper to stainless steel. Ceramic Bobbin Heater consists of 80/20 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end.Ceramic Bobbin Heater offers a large surface area to heat liquids or semi-solid materials such as water, oil, wax, fats, and bitumen. These heaters are mainly used for direct heating of air and indirect heating of liquids and gases where the element is fitted into a pocket in the process tank or system so that the element may be replaced without draining down the system or vessel.

Installation :-

We manufacture Ceramic Bobbin Heater for any voltage or wattage within manufacturing limits. Heater can be supplied with suitable mild steel or stainless steel pockets and mounting flanges or bosses is required.

The element allows easy installation and handling. They are normally manufactured for horizontal mounting, but may be specially designed constructed for vertical installation. These are energy efficient as 100% of the heat is generated within the solution. The versatility is that this type of heating unit gives simple, low cost installation.

We offer foil heater. Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. Some hard to heat application, however require custom heaters with flexibility, resistance to wear reliability and cost effectiveness. With no order minimum and the ability to choose material, size, voltage, wattage, cutouts, attachments options and built in controlling options.