Our Products
Rulers
2 Products availableLaboratory Equipments
2 Products availableAnemometer
2 Products availableTransmitter Device
1 Products availableIndustrial Pump
1 Products availableTransducer
1 Products availableSensors
1 Products availableWe offer a complete product range of Manual Force Gauge, Push Pull Force Gauge., Precision Digital Pressure Gauge and Digital Pressure Gauge
SSNT has recently launched Push Pull Force Gauge. The Push Pull force gauge is a force measuring instrument for push & pull force. Due to gravity the meter when held inclined ( or reverse ) shows reading different than when held vertically. To remove gravity effect, turn zero adjust holding the gauge in measuring mode. Ranges in these gauges are 10kgf, 20kgf, 30kgf, 50kgf and 100kgf. Accuracy is +0.25%, 0.5 % and 1 % F.S.
The Digital Push Pull Force Gauge can easily measure tension and compression forces and can display the measuring value in a moment with excellent response function. These gauges mounted on stand will create a high precision load tester for a range of applications.
Special features include Handy structure, Programmable set points, Selectable three units, Peak force, Hold facility, Fast conversion display.
1 ) Direct reading of tension & compression2 ) Complete with hook and other adaptor tips3 ) Readout in kgf / Newton / pounds4 ) Works with 9 V Battery5 ) Tests stands for most application6 ) Overload capacity 200 % F.S.7 ) 4 Digit LCD Display8 ) External switches for hold and clear9 ) Tare function available10) Low battery indication11) Operating Temperature 0 o C to 40 o C
APPLICATION
1 ) Switch , Keyboard , Contact Press2 ) Connector Insertion / Withdrawl force3 ) Adhesive Bond , Sport welds Strength4 ) Glass , Ceramics , Pills Crush Strength5 ) Brake , clutch pedal operating pressure6 ) Seal, Laminate peel strength7 ) Motor , Bearing driving force8 ) Needle penetration9 ) Spring , Silicon Rubber bending strength10) Plastic , Cardboard box breaking strength11) Fastner . Pull top can pull testing12) Paste materials, Fruit firmness
| Technical Specification: |
| Display Digit: Two Line 6 Digit LCD display |
| Accuracy: 0.1%, 0.25% |
| Case Material: SS |
| Wetted Parts: 17-4 PH stainless steel sensor |
| Connections: Bottom |
| Range: -1 to1000kg/cm2 |
| Battery: 9V PP3 Alkaline Battery /SMPS Adapter |
| Operating Temperature: 0C to 40C |
| Storage Temperature: -10C to 70C |
| Update rate: 100ms |
| Alphanumeric LCD Display. |
| Used for calibration purpose. |
| Peak hold mode, max/min, Zero reading. |
| Engineering Units: 13 measuring unit Kg/cm2, Psi, bar, mbar, Kpa, Mpa, mm-Hg, cm-Hg, in-Hg, mm-wc, cm-wc, in-wc, ft-wc . |
| Backlight provided. |
| Field Calibration: Zero and span |
| Display Digit: Two Line LCD display module |
| MODEL | DPG -10 | DPT- 10 | DPS - 10 | ||
| DISPLAY | 4 digit LCD | ||||
|
RATED CAPACITY (R.C.) |
-1 to 1000Kg/cm2 (bar, Psi) |
||||
|
OUTPUT |
- |
4mA – 20mA |
NO/NC Relay output |
||
|
ACCURACY |
0.25%, 0.5% ,1% |
||||
|
OPERATING TEMP |
0 Deg C to 50 Deg C |
||||
|
TEMP EFFECT |
0.05 % FS / 10 deg C |
||||
|
SUPPLY VOLTAGE |
9 V DC |
12VDC to 24VDC |
9VDC SMPS / 12VDC to 24VDC |
||
|
LOOP RESISTANCE |
N.A |
500 ohms max |
1Amp contact |
||
|
ELECTRICAL |
IP 65 |
NA |
NA |
||
|
MEDIA |
GAS / LIQUID |
||||
|
INSULATION |
2000 M |
||||
|
SAFE OVERLOAD |
50% OVER CAPACITY |
||||
|
PRESSURE PORT |
1/4 “ BSP MALE |
||||
|
CASE MATERIAL |
17-4PH SS, ABS |
||||
|
WETTED PART |
17-4 PH SS |
||||
|
KEYBOARD |
Clear, Max/Min, Zero, On/Off |
||||
|
FUNCTION |
|
||||
|
OVERLOAD |
5 TO 200 kg/cm2: 300% R.C. |
||||
