SM Adhesives

Khed, Ratnagiri, Maharashtra

Ours is a Chiplun (Maharashtra, India) based organization involved in offering reliable adhesive flooring services. We have a team of professionals that is proficient in conducting the adhesive flooring service. We make use of advanced machines and techniques for conducting the flooring service with ease and within the promised time frame. We make sure to provide excellent finish in our flooring work. Customers can contact us anytime to obtain our services at reasonable charges.

ELA TOBOND PU (HWC) is single component water base polyurethane wall coating for interior walls which form flexible and tough film which creates hygienic surface  treatment on interior walls.

Water proffing system using Nano technology & Multi ceramic Technology

• Terraces & Parapet Walls
• Total system Gives High water resistance vapour permeable, resistance to moisture, UV Stable, Heat Resistance.
• Bondcrete HR is polysilloxance base coating acts as a base coat and elastobond is top coat which eliminates conventional brick bat coba system also eliminates replastering of parapet and exterior damp walls.
• Bondcerte HR, Polysiloxance base coating all nanoparticles penetrate into cracks, ar the same time multicreamic technology base particles float on the top to bottom of the coating which creates water resistance and hydropobicity. due to the combination of nano and multicreamic technology product gives high performance at the same time gives high dft with high coverage.
• With the help of nanotechnology and multicreamic technology we creates high performance waterproofing Parameters are as follows :
  • Water repellent.
  • Water Impermeablility
  • Water vapour permability
  • Hydrophobicity
  • Uv stability
  • Heat Resistance
  • High Interness
  • High Penetration

Due to nano technology product gives high coverage as well as high dft because nanoparticles covers high surface area. when nanoparticles reacts with multicreamic particles crosslink with each other and when it desires cross link networl expand 100 times and we get high dft  and high coverage.

SMACSIL -C is an inorganic formulation specially designed for concrete in Indian climatic conditions. Intelligent chemicals in SMACSIL-C penetrate & chemically react with the ingredients of solidified concrete & produce numerous non-soluble nano crystals in the concrete matrix. These crystals seal the pores & capillaries in concrete. This process seals & densifies concrete and makes it water tight almost permanently.

Reaction Mechanism : Intelligent chemicals in SMACSIL-C react with free lime in the solid concrete & produce Tri calcium Alumina Silicate Hydrate in nano crystal form. This is a water insoluble material. These crystals are spread throughout the matrix of the concrete including the pores & capillaries. Thus, SMACSIL -C hydrates the concrete completely and improves its quality in respect of water tightness, life & strength.

Advantages :

• Penetrates & seals the concrete against water, mild acids and alkalies.
• Increases strength of concrete by about 10% than untreated concrete.
• Resists carbonation of concrete.
• It resists staining of concrete and improves the bond with plaster.
• It is Ultra Violet stable product.
• Increases surface hardness of concrete. Makes concrete more durable & maintains it in good service condition.
• Can be applied from negative side.

Applications :

• Terrace slabs - Jetties, bridges
• Concrete basements - Terrace gardens
• Concrete roads - Swimming pools
• Columns & Beams - WC areas
• Industrial concrete floors - Any concrete structure requiring protection Concrete reservoirs

Application Procedure :Remove all the loose materials to expose the base concrete. Wash the concrete with plenty of water Wash the concrete with 10% muriatic add solution. Again wash the concrete with plenty of water Let the concrete dry to SSD (saturated surface dry) condition. Fill all the cracks, honey combs, voids at using our BONDCRETE RP repair compound. Apply SMACSIL-C, liberally by brush or spray over the concrete surface. Allow the surface to dry for 24 hours. Protect the treated surface for 48 hours from direct water splashes, rains, foot & other traffic and scorching heat of the Sun. For water retaining structures, let the treatment dry for 72 hours and then fill water into it. Wash all the tools with water & soap. For negative side application, apply two coats with an interval of about two hours between each coat application

Caution : Protect from splashes on skin & eyes. Use protective gear like goggles, hand gloves etc. In case of accidental splashing, wash with plenty of water. In case of ingestion, do not induce vomiting & immediately seek medical assistance.

Rust Remover is a specially formulated nano-technology based product to clean the mild steel surfaces by converting active rust to a passive, neutral and inert molecular complex.This molecular layer has some very usefulproperties like corrosion resistance, surface conditioning to accept subsequent layers and providing a good molecular level ‘anchoring’ effect for the subsequent layer. It is a water based, eco-friendly formulation which is an economical temporary corrosion protection, as well as a chemical surface preparation in lieu of conventional sand blasting.

SMAC ELASTOBOND PU is aliphatic polyurethane polymeric base anticorrosive cum thermal insulation coating made from latest multi ceramic and nano technology.

Advantages :

• Reduces Temperature 10 to 15^oC
• No Primer Required
• Thermal Insulation
• Eco Friendly
• Corrosion Resistance
• Chemical Resistance
• Water Resistance
• Solvent Resistance
• Anti Fungus

Techinal Data :

• Base - Alliphatic Polyurethane Polymer
• Solid Content - 50-52 %

Application Areas :
Industrial Metal Roof - Chemical stroage Tank, pipe line, pumps, valves, motors, construction machinery air conditioning duct, transformers and all steel structures where corrosion resistance & reduction of heat is desired.

Packing : 20 kg, 50 kg

Shelf life : 12 months sealed Container

We are reputed as one of the reliablemanufactures ofConcrete Admixture in India. The use of advanced processing techniques has helped in meeting the bulk requirements of the market. The Concrete Admixture(SMAC POLYSIL IW)is widely demanded in the market as there is no alternative available for the same in terms of quality and performance. The Chemical Concrete Admixture is also available in varied grades and specifications meeting the requirements of the application areas.

• Reduces Permeability.
• Increases Workability.
• Waterproofs by actually improving quality of Concrete.

• Water Reduction.
• Retardation.
• Acceleration.
• Corrosion.
• Bonding.
• Shrinkage Reduction.
• Coloring.
• Air-Entraining.

Polyurethane Sealant (SMAC ELASTOSEAL)has earned loads of accolades to the firm as there is no alternative available. The unmatched quality and unmatched performance has also played a vital role in the enhancement of the demands of the Polyurethane Elastomeric Sealant in the Indian Market. In addition to this, catering the exact requirements of the clients, the company is listed as one of thepreeminent Concrete Joint Sealant Manufacturers, based in Mumbai (Maharashtra).

• After installation, no visible crack-filling marks are there.
• Can be installed on damp plaster or concrete.
• Resistance to alkali silica reaction (ASR).
• Elastomeric and remains permanently flexible.
• UV stable.
• Excellent adhesion on cementitious substrate.
• Eco-friendly, being water based composition.
• No sanding of the surface is required while installing SMAC ELASTOSEAL.

• Internal and external plaster cracks.
• Tremix floor joint seals.
• Beam-masonry and column-masonry joints.
• Expansion joints.
• Construction joints.
• Flexibility: 300%.

Eco friendly being water base. It densifies concrete and mortar due to Nano particle size and saves cement 10 to 12%, Resistant to map cracking. Resistant to bleeding and segregation of concrete and mortar. It does not leach out or decompose because it forms integral part of concrete and form water tightness in concrete and mortar. No sodium or potassium ions are present inSMACSIL -IWP. Hence it does not create Porosities in mortar hence water tightness remains permanently inSMACSIL -IWPmodified mortar. It reduces water curing time, only 3 day water curing is required instead of 7 days.

Advantages: Eco friendly being water base. It densifies concrete and mortar due to Nano particle size and saves cement 10 to 12%, Resistant to map cracking. Resistant to bleeding and segregation of concrete and mortar. It does not leach out or decompose because it forms integral part of concrete and form water tightness in concrete and mortar. No sodium or potassium ions are present in SMACSIL-IW. Hence it does not create Porosities in mortar hence water tightness remains permanently in SMACSIL-IW modified mortar, It reduces water curing time, only 3 day water curing is required instead of 7 days

Properties :All in One Formula Admixture PlastisizerWaterproofing Agent Water Curing SaverPorosity ReducerGrouting Material

Application Procedure : mix 100 ml SMACSIL-IW for every 50 kg of cement. First add 60 to 70% water in cement, sand and aggregate mixture, then mix SMACSIL-IW in balance 30% water, then add this mixture in wet mixture of cement, sand and aggregate then mix in mixer for 3-5 minute.

Precaution : do not exceed mixing dosage of SMACSIL-IW and do not add SMACSIL-IW in dry cement sand and aggregate.

SMAC RCCP-200  is oil base rust converter cum finish paint with special nano anticorrosive agent to protect steel structure from atmospheric corrosion.

Advantages :

• Self priming
• Rust converting
• Excellent penetration and rust converting  on oil contaminated surface
• Excellent performance even though poor surface preparation.
• Moisture tolerant and moisture release property after application of paint at the time of drying of paint excellent corrosion resistance ( 1000 hrs salt spray )moderate chemical resistant

SMAC® Anticorr RC is a polymer based rust converter-cum-inhibitor for steel, which converts rust into non rusty stable organometallic complex and protects steel from further corrosion. The Intelligent Chemicals in SMAC® Anticorr RC react with the steel molecules and produce a thin protective film over the surface.
After application of SMAC® Anticorr RC to the steel surface, the rust gets converted into a stable, non-corroding brownish black film layer over the surface. The polymer molecules form an elastic protective film over the organo-metallic complex layer. This dual protection resists further corrosion promoting molecules from reaching the base steel surface. Hence, further corrosion stops. This protective film also acts as a primer for further coat on the treated steel.
First, remove all loose particles using wire brush. Clean the surface by water and/or suitable solvent to remove oil, grease & contaminants on the surface. Then apply SMAC® Anticorr RC which converts rust within 30 minutes during clear days. In humid weather, time may be more. A uniform brownish black surface is formed as shown in the figure. Let the film dry completely. Now, the steel is ready to receive further coating treatment. The brownish black film also acts as a primer coat with all the benefits of a regular paint primer.

Application Areas :

• Chemical Plant Pipes & Vessels
• Construction Project Steel Elements
• Ships
• Railways
• Automobiles
• Industrial Steel Structures
• All other Industries where Corrosion is present.

Caution : Protect from splashes on skin & eyes. Use protective gear like goggles, hand gloves etc. In case of accidental splashing, wash with plenty of water. In case of ingestion, do not induce vomiting & immediately seek medical assistance.

SMAC Nanocoat is a highly concentrated polymer modified penetrant paint formulation for cementitious and mineral substrates. It forms a water repellent film over the substrate. No separate primer coat is required before subsequent paint coat. It acts to block capillaries in the substrate because of its penetrating chemicals & hence improves water resistant performance.

Advantages :

• No primer coat is required
• Eco friendly. Very low VOC content
• Prevents moisture absorption and dampness
• High coverage
• Alkali resistance
• Excellent hiding properties
• It forms a breathing coat over the substrate, hence low blistering n Can be used on previously water based paint coated surfaces n Prevents chalking of surfaces on which it is applied

Applications :

• Mildly damp and cured exterior and interior concrete surfaces
• Asbestos surfaces
• Pre-mixed mortar surfaces

Application Procedure :

• Clean all the the surface by removing loose matter, dust, dirt, algae, fungi, oily residues, previous paint residue, curing membranes etc and washing clean with water. It is recommended that the surface should be cured fully. Still, SMAC® NANOCOAT can also be applied on fresh surfaces.
• Repair cracks in the surface using cement : sand mix of 1:3 ratio or appropriate crack repair putty. Level the surface properly.
• Dilute SMAC® Nanocoat with potable clean water in 1:0.5 proportion and apply with brush or roller in a uniform manner as per coverage guidelines, as the first coat. This coat works as the priming as well as base coat for the surface. For better appearance, you can stain this coat using Acrylic paint stainer as per your shade requirement after dilution with water.
• Leave to dry and cure for at least 6 hours prior to over-coating.
• Dilute SMAC® Nanocoat with potable clean water in 1:0.5 (Paint : Water). Stain with Acrylic paint stain like Apex stains after dilution with water and apply over the previous coat
• Clean all the equipment & tools with plenty of water.

Care During Application :

• Always stir and filter the paint before use.
• Do not apply SMAC® Nanocoat below 12. C temperature and rains.
• Protect the area applied from rains and water splashes for at least 24 hours.
• Do not scratch or peel the primer.
• Do not thin SMAC® Nanocoat excessively.
• Do not extend the brush stroke excessively.

SMAC® Epoprime is a two component, nano modified water based Epoxy Primer. It has been developed specially for fresh, moist, damp and old concrete prior to application of Epoxy and Polyurethane top coats.
SMAC® Epoprime is developed for Water based Epoxy and solvent less Epoxy / Polyurethane final coats over a concrete surface. It also serves as a sealer coat, as it penetrates the concrete capillaries and seals them.
SMAC® Epoprime further reduces the absorp tion o f subsequent Epoxy and Polyurethane coating materials, thus improving coverage with enhanced protective effect.

Advantages :

• Itpenetrates into the capillaries present in the concrete & seals them
• Itcanbe applied on fresh, moist or damp, as well as old concrete
• Improves  strength  of  fresh concrete surface by about 10%
• Excellent  adhesion  with  water based Epoxy and solvent free Epoxy / Polyurethane top coat and concrete
• Eco-friendly, being water based formulation
• Itcanbe applied on metal and wood also

Application Procedure :

• While applying SMAC® Epoprime coat, surface preparation is the most important part. Remove all the loose materials to expose the base surface of the wall. Wash the surface with plenty of water.
• A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to SSD (saturated surface dry) condition.
• Fill all the cracks, honey-combs, voids etc using cement mortar or our POLYPATCH C fast repair compound. Mix the resin & hardener parts of SMAC® Epoprime thoroughly, to get a uniform consistency.
• Remove any lumps. Apply a coat of SMAC® Epoprime liberally by brush over the surface. Allow the surface to be touch-dry. The surface is now ready for final Epoxy or Polyurethane coating. Apply the necessary topcoat over this primer coat for best results.

Advantages : Eco friendly being water base. lt densifies concrete and mortar due to Nano particle size and saves cement 10 to 12%, Resistant to map cracking. Resistant to bleeding and segregation of concrete and mortar. It does not leach out or decompose because it forms integral part of concrete and form water tightness in concrete and mortar. No sodium or potassium ions are present in SMACSIL-IWP. Hence it does not create Porosities in mortar hence water tightness remains permanently in SMACSIL-IWP modified mortar, It reduces water curing time, only 3 day water curing is required instead of 7 days.

Properties :

• All in One Formula
• Admixture
• Waterproofing Agent
• Water Curing Saver
• Porosity Reducer

Application Procedure : Mix 200ml SMACSIL-IWP for every 50 kg of cement first add 60 to 70% water in Cements and, Concrete Mixture, then mix SMACSIL®-IWP in balance 30% water, then add this mixture in wet mixture of cement, sand and aggregate then mix in mixer for 3-5 minute.

Precautions : Do not exceed mixing dosage SMACSIL-IWP of and do not add SMACSIL®-IWP in dry cement sand and aggregate.