Our Products
Wire Mesh, Wire Screens & Gratings
2 Products availableFencing Wire
2 Products availableSensors
2 Products availableSafety Products
2 Products availableBoundary Fencing
1 Products availableMarine Equipment
1 Products availableWire Making Machines
1 Products availableElectrical Cables & Wires
1 Products availableTransducer
1 Products availableSensors And Transducers
1 Products availableOur offered Product range includes anti climb mesh, Shallow Mount Bollard system, Rapid Deployment System and Radescan RASTR Radar.
Anti climb mesh fence (Also known as prison mesh or 358 mesh) has been universally accepted as the most secure form of welded mesh panel commercially available with significant inherent advantages over products such as chain link fencing or other forms of welded mesh fencing owing to its unique configurationDesigned to bring maximum perimeter protection to a site without impeding visibility.
Extremely difficult to penetrate using conventional hand tools for cutting the mesh and makes mesh panel almost impossible to grip, thus climb.
Non-aggressive appearance with pleasant aesthetics.
Tamper proof fixings assure that panels cannot be removed from the attack side.
Design of the system is such that, system requires no fabrication work on the site, factory finish is maintained while installation.
Completely modular system hence can be removed & shifted as per requirement.
Fast & accurate installation; approx 2 km in a month
The Razor blade design makes this fence virtually impossible to climb. The pattern of the welded mesh has been designed to required an intruder to make approximately 25 separate cuts before a person can even attempt to pass through the fence. Welded Razor Mesh is made from high quality tensile steel. Stainless or galvanized steel options are also available.
SS Unico/Weld meshis the term given to the kind of barrier fencing that is manufactured in square or rectangular mesh from steel wire, welded at each intersection. It is usually affixed to steel uprights. Weld mesh has an advantage over chain link wire of not bending so easily and not being so easily cut. Fence wire panels are galvanized with the best technology to make them strong corrosion resistant
Fence wire panels are galvanized with the best technology to make them strong corrosion resistant.
Weld mesh panels are often crimped to add more lateral strength to the panels.
The V branch on each panel adds extra strength to it
Long life due to polyester powder coating.
Easy and quick installation.
Excellent aesthetic appeal
Dual coated (Epoxy and polyester powder).
Designed to bring maximum perimeter protection to a site without impeding visibility.
Extremely difficult to penetrate using conventional hand tools for cutting the mesh and makes mesh panel almost impossible to grip, thus climb.
Non-aggressive appearance with pleasant aesthetics.
Tamper proof fixings assure that panels cannot be removed from the attack side.
Design of the system is such that, system requires no fabrication work on the site, factory finish is maintained while installation.
Completely modular system hence can be removed & shifted as per requirement.
Fast & accurate installation; approx 2 km in a month
Flexible fence fabric makes it easier for installation on ground.
Easy to install on uneven terrain or steep slopes.
A cost efficient system
Fence wire panels are galvanized with the best technology to make them strong corrosion resistant.
Weld mesh panels are often crimped to add more lateral strength to the panels.
The V branch on each panel adds extra strength to it
Long life due to polyester powder coating.
Easy and quick installation.
Excellent aesthetic appeal.
Dual coated (Epoxy and polyester powder).
Barbed wire fencing is perhaps one of the oldest forms of fencing made out of MS wire. But yet of great utility in topping high security fencing like Anti climb mesh, or by itself where the intent is to keep away the cattle.
Is available in various forms, the most conventional is double stranded line wire with the barbing wire (4 point Iowa type) at a certain pitch
PVC coated barbed wire is also available which further improves the life of the product. This product is usually offered with both the line wire and barb wire specification of core wire diameter 1.8mm and outer diameter 2.6mm.
Supporting pillars are example of excellent metallurgy & strength.
Identifies, locates, differentiates and classifies surface perimeter intrusion and underground activity e. g. digging or movement in passageways and tunnels
Deception proof passive system; cannot be easily detected or bypassed
Is cost-efficient, easy to install and operate
Ultra-low FAR
Novel 3D seismic sensors
Event positioning capabilities
Taut Wire Intrusion Detection Systems is based on the traditional concept that revolutionized the perimeter security market by combining a true physical barrier with highly reliable intrusion detection in one cost-effective solution. Taut Wire Intrusion Detection Systems have established a solid reputation for successfully detecting and preventing perimeter intrusion and escape attempts while maintaining the lowest false alarm and nuisance rates available in the marketplace today. Taut Wire Systems are currently in use worldwide in all terrains and environmental conditions.
Taut wire is applied to a wire fence in various configurations. The horizontal taut wires are fixed to the sensors that are mounted in a sensor post in the center of the zone. The sensors are high-voltage insulated. Sensor management and environmental compensation is managed by individual microprocessors.
When the taut wires are deflected, the corresponding sensors will be mechanically deflected, resulting in a change in electrical potential. The change in electrical potential is transferred to the algorithm processing system. The system will signal an alarm condition if the change exceeds preset detection limits.
Pre determined frequency is being transmitted in a steady rate, once any object enters the invisible detection field, a signal interruption is being registered and alarm is triggered.
RF cables can be buried underground, embedded in concrete and suspended above ground.
RF system can use either cable to cable transmission which requires a large, normally uninterrupted space in order to be effective, or, a cable to antenna transmission to allow larger detection areas to be covered with less physical area to be used.
Due to system sensitivity, RF is normally installed and suggested in areas where any movement in the area of detection would be considered as an intrusion or a threat.
The system does not require field Boxes, processors or power for sites up to about 1.5 Km.
The system does not require a processor at all and can be plugged in directly into the control hub (or computer).
The SVS 1000 provide alarm resolution of 3m rather than up to 100m in other systems.
The same sensors can act as Magnetic sensors, guard tour notification sensors and temperature sensors.
There is no orientation requirement for the sensor unlike other systems where the sensor has to be levelled and adjusted.
Omni-Directional installation on any infrastructure.
Decentralize processing very low FAR and high resolution settings capability.
Cost effective.
The system does not require field Boxes, processors or power for sites up to about 1.5 Km.
The system does not require a processor at all and can be plugged in directly into the control hub (or computer).
The SVS 1000 provide alarm resolution of 3m rather than up to 100m in other systems.
The same sensors can act as Magnetic sensors, guard tour notification sensors and temperature sensors.
There is no orientation requirement for the sensor unlike other systems where the sensor has to be levelled and adjusted.
Omni-Directional installation on any infrastructure.
Decentralize processing very low FAR and high resolution settings capability.
Cost effective.
Hydraulic rising bollards are designed especially for high security vehicle entrances and for a location that has to be closed for motorized traffic on specific times. They can be installed as a single unit as well as in groups. Bollards are driven hydraulically and the hydraulic drive unit is placed in an installation cabinet close to the bollards. In case of power failure bollards can be lowered manually. With the help of plc/microprocessor controlled electronics, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off switch or key switch etc. Besides, safety accessories like loop detectors, photocells, flashing lights or red/green lights can be integrated to the control electronics very easily.
The Shallow Mount Bollard system meets the Department of State crash rating specifications. Unlike standard bollard-type perimeter installations where the need for at least 4 5 foot deep trenches, unwieldy form construction and laborious concrete pours create site disruptions; the shallow mount foundation system can be set in a 6 to 14 inch footing and can blend in nicely to any surrounding. Adding architectural fixtures such as benches, planters and other ornaments can create an aesthetically pleasing environment, while creating a force-protected perimeter for any asset .
Bollards are offered in both standard and decorative configurations. Our technical team can assist clients with the development of security systems to meet specific needs. Custom designed systems are available.
The Vehicle Arrestor provides access control as a reduced risk vehicle barrier. Massive energy absorption and give occurs upon impact, versus impacting a fixed and rigid bollard, wedge, or jersey barrier. This system deploys in less than 2 seconds from below the pavements surface spanning more than 250 feet.
This highly anticipated Vehicle Arrester is a non-lethal device used to safely catch and stop any category of vehicle up to and including a 15, 000 pound truck traveling at speeds of 50 mph. Unlike other anti-incursion devises on the market, The vehicle arrestor will cause minimal damage to the vehicle or injury to passengers.
Retractable Vehicle Arrester resembles a large net that when deployed manually or automatically by a speed sensor, springs from the ground to immediately catch, cradle and arrest an oncoming vehicle while safely bringing it to a controlled stop. Unlike traditional cement barriers and imbedded vertical bar installations, Retractable protection deviceunless deployed in an emergency situationis installed below ground so it does not impede routine traffic or detract from the aesthetics of the surrounding area. Beneficiaries of this solution might include: military bases, oil refineries, nuclear power plants and other critical infrastructure that require multi-layered and robust perimeter security solutions.
Slingshot is in a position to offer wide variety of security gates to suit requirements of a project. It can be a one off gate or a gate to be integrated with the perimeter fence, where the gate construction is done in such a way that fence and gate blend into each other. This adds immensely to the aesthetic appeal of the whole construction.
There are several design considerations before deciding upon the gate design which fulfil the project requirements whether it should be a sliding, single swing, double swing, telescopic or should there be a small pedestrian gate built inside a large industrial gate. What are the security requirements, should there be an access control, or the gate should be motorised or manual and more such consideration. Slingshot has answer and solutions for all requirements.
We supply powder coated over hot dip galvanised steel section gates, which ensures very long life and cost effectiveness over stainless steel gates.
(UVIS) designed to provide a security solution for inspecting the most vulnerable part of a vehicle the chassis. Objects may vary from explosives, drugs, merchandise and even in some cases, the smuggling of human beings across borders or out of prison compounds. The versatile view angle allows the user to verify, from multiple angles, the suspicious threat before actually having to physically reach the subject. In the case of bomb squad technicians, being able to examine the object from a distance before having to physically deal with it could make the difference between life or death, as well as spare the inconvenience of false alarms. All data from the system can be recorded to the local DVR system for training and investigative uses. The data can also be linked to a LPR system for better documentation.