Our Products
Industrial & Engineering Products
1 Products availableRoofing Sheets
1 Products availableIndustrial Plastic Pipes
1 Products availablePlastic Component
1 Products availableHardware Fittings And Accessories
1 Products availableAuto Accessories
1 Products availableGaskets And Gasket Material
1 Products availableTyres
1 Products availableCompression Molded Rubber
1 Products availableBelts
1 Products availableWe offer a complete product range of Glass epoxy sheet, red fibre sheet, HEAT SHRINK SLEEVING, Acrylic Rod and pvdf rod
G9 G10 FR4 GLASS EPOXY SHEET
G10 and FR4 glass cloth reinforced epoxy natural is typically a yellowish to light green color. The most versatile all-around laminate grades are continuous glass woven fabric impregnated with an epoxy resin binder. Epoxy resins are among the most versatile and widely used plastics in the electronics field, primarily because water absorption is virtually nil, rendering it an outstanding insulator.
Beyond its electrical insulating properties, epoxy resins exhibit great dimensional stability (shrinkage is usually less than 1 percent) and superior adhesive properties. G10/FR4 has extremely high mechanical strength, good dielectric loss properties, and good electric strength properties, both wet and dry.
we are offering polypropylene sheet. polypropylene possesses excellent resistance to organic solvents, degreasing agents, and electorlytic attack. it has a lower impact strength but its working temperatures and tensile strength are superior to low or high densitypolyethylene. it is light in weight resistant to staining and has low moisture absorption rate. this is a tough, heat -resistant, semi-regid material ideal for the transfer of hot liquid or gases. it is recomended for vacuum system and where higher heats and pressures are encountered. it has excellent resistance to acids and alkalies, but poor aromatic, aliphatic and chlorinated solvent resistance. heat distortion temp.: 220f . colors: simi-opaque.
Acetal is a general-purpose acetal and is the only porosity-free acetal product available today. Thickness tolerance on sheets less than 1/8" +0.0257"/-0; sheets 1/8" and thicker 0.005".
High strength, stiffness
Not UV stabilized
Porosity-free
Low moisture absorption
Easy to machine
Hardness (shore R): 120
Tensile strength: 9500 psi
Specific gravity: 1.41
Temperature range (air): -50F to 180F
Meets FDA, USDA.
NYLON SHEETS
Nylon was the first engineering resin and has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon sheet has outstanding wear resistance and low frictional properties.
Nylon has very good temperature, chemical, and impact properties. Parts machined or fabricated from nylon are light weight and corrosion resistant. Low friction, good abrasion resistance and the ability to operate without lubrication, qualify the nylons for such applications. Parts machined or fabricated from cast nylon are light weight and corrosion resistant. In addition, cast nylon's excellent load bearing capability, wear resistance and impact resistance make it ideal for demanding construction environments.
Nylon sheet which has not been compounded with UV stabilizers are sensitive to ultraviolet light. These compounds should not be used for extended outdoor service. Carbonblack (our black Nylon Sheet) is the most effective of the UV stabilizers. These additives also increase tensile strength and hardness and decrease ductility and toughness slightly.
FEATURES
Good abrasion and wear resistance
Continuous use temperature of 220F
Very easy to fabricate
Outstanding chemical resistance to alkalies and oxidizing agents
High strength and stiffness at elevated temperatures
Light weight (approx. 1/8 vs. bronze)
Good impact strength at low temperature
Low friction coeficient
FDA & USDA (Natural)
APPILCATIONS
Bushings
Bearings
Rollers
Manifolds
Gears
Sprockets
Sheaves
Insulators
Wear components
We are offering fiberglass epoxy sheets. Mechanical and structural properties, unique to industrial laminates, are invaluable where non corrosive, strong material is required. Phenolic sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with synthetic resin. These layers of laminations are usually of cellulose paper, cotton fabrics, synthetic yarn fabrics, glass fabrics, or unwoven fabrics. When heat and pressure are applied to the layers a chemical reaction ( polymerization) transforms the layers into a high pressure thermosetting industrial laminated plastic. Skjd supplies laminates in a number of grades to suit different applications. These grades are achieved by combining various reinforcements with many types of thermosetting resin binders.
RED FIBRE SHEET
Product Description
Insulating steel paper: It has the characteristics of high compactness, good smoothness, fine and smooth surface, no fading, low water absorption and no moisture regain. High heat and light resistance. Applications: 1. Electrical arc extinguishing cover 2. Motor Rotor Slot Wedge 3. Insulation gaskets and gears for various electrical appliances 4. Textile, machinery, aerospace and other industries ColorRed, gray, white, black, choco/olive(both sided), other colorsThickness0.4-3.0mm or based on ordersRed White Gray Black Vulcanized Fiber Paper Vulcanized Fibre SheetProduct DescriptionUsageIt can be used for sanding discs, washers, insulating sheet, switch and appliance insulation, electric motor insulation, gaskets, automobile parts etc._04.jpgProperties of Vulcanized fibre1.High mechanical and tensile strength2.Easily bendable and perforated without any cracking3.Exceptionally light weight, about half the weight of aluminum4.Excellent electrical properties, ideal arc resistance, tear resistance5.Possesses the beneficial properties of metals, plastics, rubber and leather6.Environment friendly, poses no threat to nature, easily disposableTechnical Data SheetItems Unit ValuesThiuskness Normal m 50 75 80 130Tolerance 4.0 4.0 5.0 7.0Density g/cm 0.90.05Tensile Strength MD KN/m 3.8 3.8 6.2 11TD 2 2 3.1 5.2Elongation MD % 1.9 1.9 2TD 4 5 5.4Tear Strength Mn 300 510 510 1020Bending Strength Times 950 1000 1200 2200Electric Breadown Voltage KV/mm 8PH of Aqueous Extract 6.58.5Water Extraction Conductivity mS/m 8Air Permeability m/Pa.s 0.51Ash Content % 0.7Water Content % 6.08.0 6.09.0
PEEK sheetPolyetheretherketone (PEEK)
PEEK sheetPolyetheretherketone (PEEK) offer the highest chemical resistance of any semi-crystalline plastic with excellent retention of mechanical properties up to 570F (300C). PEEK offers a combination of superlative properties that allow it to replace metal in some of the most severe end-use environments.Key FeaturesExceptional chemical resistance to organics, acids and basesHigh mechanical strength in excess of 250C (482F)Very good wear and abrasion resistanceLow CLTE and high limiting PV propertiesBest-in class fatigue resistanceExcellent dimensional stabilityExcellent resistance to hydrolysis in boiling water and superheated steamSuperior dielectric with low loss at high temperatures and frequenciesEase of processingHigh purityTypical ApplicationsAircraft Hardware and fastenersAircraft mechanical componentsAutomotive electrical/electronicTransmissions/powertrainSemiconductor fabrication. Contact SK Jain distributors Abhishek Jain 9811010658 9811504268
Teflon Cloth PTFE Coated Fiberglass Fabric
PTFE Coated Fiberglass Fabric Teflon Cloth PTFE Coated Fiberglass Fabrics means higher level of PTFE coated with high quality fiberglass fabric. Its surface showing a very smooth, low friction characteristics. It also has excellent abrasion, high temperature, chemical resistance, the best release and good tensile strength. PTFE Coated Fiberglass Fabrics is mainly used in some special applications requiring an extremely smooth surface. Main Features 1. Excellent release characteristics 2. Low surface friction 3. Operational and dimensionally stable from 100F (-73 C) to +550F (+288C) 4. Abrasion and Chemical resistant 5. compliant for food processing Contact SK Jain Distributors Abhishek Jain 9811010658 9811504268
We are offering high density polyethylenem high density polythylene offers superior corrosion resistance, a higher working temperature range, and higher tensile strength. This material outperforms low density poluythylene in physical and chemical properties, but it is less flexible than low density polyethylene. Sterilizition can be done by boiling. Outdoorexposure is similar to low density polythylene. Heat distortion temp. : 170f . Color : semi-opaque.
we offer heat shrinkable tubing meeting commercial and military requirements in a wide range of application-oriented materials. the use of polyolefin heat shrinkable tubing provides an effective means of applying a skin-tight, protective covering for a wide variety of electronic, electrical, electro-mechanical and mechanical applications. the use of polyolefin heat shrinkable can result in important benefits in cost, weight and size reduction and improved performance, reliability and apperance. ain heat shrinkables lend themselves easily to automation, with resulting labor-cost savins. moderate heat is applied to the polyolefin heat shrinkable tubing which then molds itself to conform to regular or irregularly shaped objects.
We are offering checked ptfe sheets, teflon (polytetrafluoroethylene) provides exceptional chemical, electrical, mechanical and thermal properties for a multitude of applications. It has one of the lowest dielectric constants and dissipation factors of any solid material. Teflon is almost totally unaffected by the chemicals usually encountered in commercial use.
we are offering mechanical and structural properties, unique to industrial laminates, are invaluable where non corrosive, strong material is required. phenolic sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with synthetic resin. these layers of laminations are usually of cellulose paper, cotton fabrics, synthetic yarn fabrics, glass fabrics, or unwoven fabrics. when heat and pressure are applied to the layers a chemical reaction ( polymerization) transforms the layers into a high pressure thermosetting industrial laminated plastic. skjd supplies laminates in a number of grades to suit different applications. these grades are achieved by combining various reinforcements with many types of thermosetting resin binders.
100% Virgin PVDF ROD
There are two kinds of PVDF rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PVDF is the most chemical-resistant of all known plastics. It does not age. PVDF has a wide range of practicable temperature from 180%C - +260C and a wax-like surface to which anything hardly sticks. PVDF has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics. PVDF100% Virgin PVDF rods : Features:There are two kinds of PVDF rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; PVDF is the most chemical-resistant of all known plastics. Contact SK jain Distributors Abhishek Jain 9811010658 9811504268
We are offering poly carbonate sheet. Properties high impact strength good machinability good dimensional ability excellent thermal properties from below--40 f to 270 f low water absorption high impact strength excellent heat resistance easy to print and decorate high tensile strength
Ebonite is a hard material that is made by heating a mixture of rubber and sulfur under a slight pressure.
Ebonite is durable, scientifically stable and provides excellent electrical insulation and machinability. Before the rise of petroleum-derived plastic, ebonite was widely used in every aspect of life
Ebonite is used as an anticorrosive lining for various vessels that contain dilute hydrochloric acid .
When the surface of ebonite is polished, it gives a beautiful, lacquer-like gloss.
Also, with a characteristic that does not disturb tones, it is used as inner pipes of woodwind instruments.
With these characteristics, ebonite is widely used in many ways, including electrical insulation materials, premium gold or silver lacquer fountain pens, instrument mouthpieces, smoking supplies and fishing gear.
UHMW Sheet
This Ultra High Molecular Weight (UHMW) Polyethylene will outwear all other materials, including metals, nylons, urethanes, and fluoroplastics. Applications include guide rails, wear plates, rollers, conveyor augers, bin and hopper lines, chutes, bearings, bushings, and gears.
Exceptionally high abrasion & impact resistance
Low coefficient of friction
Self-lubricating with a non-adherent surface
Cuts maintenance costs & extends equipment life
Corrosion resistance; same qualities of other PE
Use mechanical fasteners in construction
Temperature range: -60F to 180F
Meets FDA & USDA standards
We are offering pvc rigid sheets. Polyvinyl chloride is aflexible or rigid material that is chemically nonreactive. Pvc has a broad range of applications, from high volume construction related products to simple electric wire insulation and coatings. Rigid pvc is easily machined, heat formed, welded, and even solvent cemented. Pvc can also be machined using standard metal working tools and finished to close tolerances and finishes without great difficulty. Pvc accepts paint and performs well under most silkscreening processes. Pvc resins are normally mixed with other additives such as impact modifiers and stablizers , providing hundreds of pvc resins are normally mixed with other additives such as impact modifiers and stablizers providing hundreds of pvcbased materials with avariety of engineering properties. There are three broad classifications for rigid pvc compounds: type I , type-ii and cpvc, type ii varies from type I due to greater impact values but lower chemical resistance. Cpvc has greater high temperature resistance. These materials are considered "unplasticized" , because they are less flexible than the plasticized formulations. Type i, ii and cpvc are normally available in rod, sheet, slap, pipe, tubular bar, fittings and valves. "plasticized" pvc is available in sheet, film, fittings, flexible tubing, and pipe.