SK Adhesives Pune, Maharashtra

Gives best resistance to dynamic, axial & radial loads. Recommended for retaining shafts, gears, pulleys & similar cylindrical parts.P1 NSF Ref. No: 123010

These products combine personal comfort, fashionable good looks and overall value. Depending on the use, the wearer can select from several different models and colors.

Those products designated as hard hats meet the requirements of the American National Standard for Industrial Head Protection ANSI Z89.1-2003, Type I, Class C, E and G. These products provide limited protection only. Misuse or failure to follow warnings and instructions may result in serious personal injury or death.

Application Areas include Automotive, Chemical, Engineering, Manufacturing, Oil & Gas, Infrastructure, etc.

Some of the well-known & widely used 3M Head Protection gears are mentioned below. Please Contact Us for more details and/or to know more about other Head Protection gear.

• 3M Hard Hats H400 Series
• 3M Hard Hats H700 Series
• 3M Omega II Ratchet Suspension Hard Hat 1910 Series
• 3M Omega II Standard Suspension Hard Hat 1900 Series
• 3M XLR8 Hard Hats
• PELTOR G2000 Hard Hat with UVicator sensor

Peltor is a world wide leader in earmuff protectors because of its many innovative and exclusive features.

• Patented Liquid & Foam-Filled cushions for better seal and lower pressure
• Padded wide head band for extended wear
• Stainless steel headband with four-point suspension helps distribute cusion pressure evenly
• Simple height adjustment. Earcups pivot for alignment and consistent fit
• Wide ear cushions for comfort. Replaceable ear cushions
• Dielectric muff available

At 3M, they don't just sell hearing protection, they're dedicated to the success of your entire hearing conservation program. 3M E-A-R and Peltor Hearing Protection products are some of the most recognized on the market.

3M offers high-quality hearing protection products for the Indian Industry. These are lightweight, comfortable, reliable and easy-to-use solutions in a wide range of industrial application.

Click on Specific Product Group on the left to find more about it.

3M Abrasive products that consist of surface conditioning, coated, bonded and super abrasives address diverse applications, varying grinding and finishing needs across different industries. Do more with the extensive range of 3M Abrasive products - grind, blend, polish, sand, prep, cut, clean or repair surfaces for use in metal fabrication, precision castings, cylindrical grinding, furniture and custom wood, automotive manufacturing, maintenance, and so on. Abrasive Systems from 3M ensure reliable performance, guarantee exemplary safety and a superlative finish.

Click on Specific Product Group on the left to find more about it.

Merit LMC6 is a copper coated MIG wire that is an excellent choice for welding on metals with a medium to high presence of mill scale. With its high silicon and manganese deoxidizer levels, superior feedability, excellent arc characteristics, excellent weld appearance and toe wetting, Merit LMC6 is the industrys premium brand of MIG wires. Shielding gases include argon/carbon dioxide blends and straight carbon dioxide. For best performance use on clean, oil-free base material.

• Excellent drawing and copper coating techiques ensure superior feedability and excellent arc stability.
• Copper coating provides superior arc-starting characteristics, for long contact tip life and is manufactured not to flake, which can clog liners and contact tips.
• Will support all the traditional modes of GMAW metal transfer: shortcircuiting, globular, axial spray, and pulsed spray.
• Precision layer wound spools are well suited for applications where accurate and consistent wire feeding is necessary.
• Excellent spatter control and bead profile.
• Conformance: AWS A5.18, ER70S-6

Premierweld IN61 is a low carbon, medium manganese, medium silicon general purpose submerged arc welding wire. It produces welds with tensile strength 5 - 15ksi higher than those with EL-12 depending on the flux and procedures used.
Its construction is simple, the wire is wrapped around a paperboard tube. The reusable adaptor allows a coil to fit on the industry standard 50mm hub.

• Consistent weld deposit chemistry and procedure from drum to drum improve quality and save time.
• Has no soft spots, set the welding procedure once and forget about them.
• Thin copper coating yields significantly improved electrical contact between wire and contact tip for better stability and longer tip life.
• Low feed force help to reduce wear and tear on equipment.
• Can be used with 780, 960, P223, BF-1 fluxes.

• Bond non-threaded cylindrical metal assemblies
• High and moderate strength products - can carry high loads and eliminate fretting
• Fill all voids - prevent corrosion
• Reduce the need for close tolerances
• 100% contact - load and stress is distributed evenly over the joint

For rigid assemblies. Excellent fluid resistance. Medium Modulus, low elongation, for low relative joint movement. Non-Corrosive to aluminium, iron & steel. Low odor, low volatility.

Can be safely applied on metal and plastic threaded fittings.Potable Water: ANSI/NSFStandard 61. UL Listed and Certified to CSA International.

• Prevent loosening from shock and vibration
• Single part - clean and easy to apply
• Can be used on various sizes of fasteners - reduces inventory costs
• Seal threads
• Stop rust and corrosion

Effective on all types of metal threaded fasteners. Prevents loosening on vibrating parts such as pumps, motor mounting bolts, gear boxes, or presses. Recommended for use where disassembly with hand tools is required for servicing and where parts are contaminated with oil.NSF/ANSI 61. Agriculture Canada Approved.