Sivananda Electronics

Lam Road, Nashik, Maharashtra

Fully automatic Dielectric constant, Dielectric Dissipation Factor & Resistivity Measurement.Selection of Different Standards.Inbuilt Printer facility for Test Report Printing.Cycle Measuring Time 25 minutes As per IEC 247.Custom Mode selection.Easy storage of Data.

Impedance Meter MK1(S) is specially designed to measure characteristic impedance of Cables at 1KHz. Digital readout for ZSC (short circuit impedance) and ZOC (open circuit impedance) useful to calculate ZCH (Characteristic impedance). ZCH = ( ZOC x ZSC).

The oil insulation test kit is intended to be used for testing of dielectric strength of insulating oil used in Transformer , Circuit breaker, CTs, PTs etc. The test kit is fully automatic and has the facility for AutoManual selections. The operator simply needs the sample in the test vessel & selects the required test. Testing can be done as per many international ( IEC & European standards ) which are programmed into the instrument memory . Stand time, stir times & rate of rise of applied voltage can be selected in Custom Mode also , one set of such selected mode can also be stored in the memory. In addition to the above set can also perform withstand test (proof) tests. In this test the set allows the set voltage to pre-set value & hold for one minute to see if breakdown occurs. The backlit LCD is used for user friendly operations during the test process. It also display fault condition messages such as open ground cover open . All the user selected programmes are chosen through(4x3) key pad. The test results can be printed along with with test type, date, time, breakdown test voltage, averages and deviations. Voltage value can be measured & printed with a resolution of 0.1 kV. In reprint option it is possible to have number of printouts for the last test. For each test the readings are recorded and stored in memory. All stored readings can be transferred via the RS-232 interface to PC(Optional).A safety interlock prevents access to the high voltage terminals during testing. The design ensures a high level of safety for the operator. The high voltage chamber is covered by a polycarbonate door.

The motorized (Automatic) Oil Insulation test Kit is intended to be used for testing of Dielectric strength of insulating oils used in transformers & circuit breakers. The kit comprises of following:-A control unit with a HT-transformer operates on mains voltage of 220 Volts.A robust & sturdy motorized variac is provided to increase the voltage from 0 to 60 KV.The HV chamber with interlocking to ensure operator safety.Automatic Motorized oil BDV with rate of rise of 0.5KV- 5KV Sec

The basic function and voltage range are all same as ST-210E. Here output will be available in only one channel as there is no need for connecting the master coil motor every time. You can store the waveform of all the types of coils digitally in memory. When testing a particular type, the stored waveform is called and the waveform of the tested coil is compared with it. The operator can do the comparison manually or the software can automatically compare the waveforms, and give you a passfail result.The built-in monitor provides the display of waveforms and the user interface menu. The control and operation is very easy as the software is fully menu driven. There is facility for storing standard test programs.The digital tester is very useful when testing motors at site. You can test all the motors. Store all the results in memory. Then take either printouts or download all data to your PC for analysis. The stored historic data can be used for comparison during periodic testing and the data can be used to monitor the condition of the motor.

Sivananda Electronics has maintained its leadership in the field of entrance control solutions for over 15 years through its research & development work. We have supplied more than 1500 turnstiles through out India including Defense, Nuclear Power plants, Oil refineries, amusement park, film city etc. Tripods are designed to control pedestrians entering or exiting restricted area in low to medium level of security generally under some surveillances & Crowd control applications The rotation is 3 X 120 degree (Tri-arm design) for bi-directional application with high volume of pedestrian movement.

Retractable Flap barrier is available in single lane & multiple lane (either even or odd) configuration as per site requirements. Two housings (end column) with retractable flap make one lane of access. One housing (inter lane) with two flaps back to back is used in between the end columns to increase the number of lanes. plants, Oil refineries, amusement park, film city etc. Our product range in entrance control solutions include Tripod, Half height, Height, Full Height dual single Lane, Clearstlye, Boom barrier, P type swing gate etc.Now we present the new generation of pedestrian access control: Retractable Flap barrier. The Sivananda Electronics has maintained its leadership in the field of entrance control solution for over 12 years through its Research & Development work. We have supplied more than 500 turnstiles through out India including Defense, Nuclear power

SIVA Electric Fence system can be easily fixed on existing perimeter wall or as add on to an existing perimeter fence. It can also be installed as a standalone fence for the required height, using independent fence posts.The fence can be mounted on gates also in a similar fashion, if required, using optional mounting arrangements. SIVA electric fence system offers the ideal solution for protection of most types of external perimeter fences walls or boundaries.

100% Indigenous.Easy to operate.Detects arms, ammunitions, mines, Improvised Explosive Device.Operate on both Rechargeable as well as dry battery at a time.HighLow Sensitivity Modes.Detachable telescopic Metal rod with shoulder support.

SIVA UPD-004 has FOUR multiple separate overlapping metal detectors in one frame. This coil structure enhances the metal detection process compared to conventional metal detectors. Metal location is reliably displayed at each zone. If metal are present in morethan one zone, all zones are displayed on the Zone Representation provided on the front panel with human symbol. Zone with the peak metal is displayed with Bargraph. Sensitivity of each zone can be set separately to get uniform sensitivity at each zone. Microprocessor technology ensure fast and reliable data processing and operation, Metal Detection, Sensitivity setting, Threshold setting, Zone discrimination.UPD-004 detects both ferrous & nonferrous metal concealed on a person.

We are offering surge comparison tester. Usefull for stator , motor any coilto detect coil to coil short. With 5 parameter