Sinicon Controls Private Limited

Palakkad, Kerala

Self Defence

The Weapon Styled BueCat Security Alarm Torch can be used as a self defence tool when in need of facing crowd. The knife Styled reflector housing could be used as knife as well as hammer to inflict damage to the other person.

Emergency

In case of transporting under emergency situaions in vehicles without Siren, BlueCat Security Alarm Torch can be used for the Siren function. BlueCat security alarm torch can also be used to break glass during fire or emergencies

Night Time Operations

Torch Function

BlueCat Professional security Alarm Torch is built with a very powerful flash light it can be used for the torch application for far distance

Strobe Function

It can be used for signalling/warning signs whenever necessary. It can be deployed in case of traffic control during road accidents, patrol etc.

Signalling

Automatic Torch Flashing options in the BlueCat Professional Alarm TOrch can be used for signalling /warning signs for concerted team operations

Patrolling

The security alarm can be used during patrol to signal any untoward incidence to the fellow Policemen/guard or to dispel the intruder as may be required. The weapon styled BlueCat Security Alarm Torch can be used as a self defence tool during patrol

Sinicon's signature security product, BlueCat Security Alarm Torch, a very unique and specially designed alarm torch for security professionals. It works just like a normal torch and in addition has a built-in security alarm and strobe. One of the greatest advantage of this product is that upon identifying the intrusion, alarm can be activated to remove the intrusion instantly and in the event of an overpowering action the same can be done with one hand whilst engaging the torch and alaram by the other hand. Since the torch is styled as a weapon it can also be used for the offensive/defensive action.Features

Features

• Powerful professional Flashlights
• Powerful professional Security Alarm
• High quality components
• Magnetic lock recharging
• weather Proof
• Built in Strobe
• Zero maintenance
• Weapon utility styling
• Built strong
• Ergonomic design
• LED Life 1, 00, 000 + Hrs
• 3 W CREE XPG LED (USA)

Community Alarm

In some communities it is used as Community Alarm which means if a theft attempt happens the owner of the house activates the alarm, flash light and also strobe. Once an alarm is heard all the community members would also initiate alarm one after another making the entire community alert. The strobe light is flashed from the original location where the actual incident took place for the identification of the incident location.

Innovative Design & High Quality

An aesthetically designed and professionally built product is unique in utility and application. The high quality metal used in the product withstands heavy impacts. All components used in the products are of very high quality and have been engineered with precision to withstand or exceed the purpose to which it is designed.

Although the climate changes naturally on its own, humans contribute heavily to pollution of the environment. Carbon dioxide emissions, the main greenhouse gas which causes climate change, actually come from the things that we do every day. More and more people are wondering how they can do their part to help reduce the emission of greenhouse gases into the atmosphere.

Green Product Certification

• IGBC
• GreenPro Certified
• GRIHA
• GRIHA V.2015 Criterion:31
• GRIHA V Criterion :34
• SVAGRIHA Criterion :14

Sinicon Sand (Sinicon PP) - An Introduction

• What is Sinicon PP ?
• Granule Structure
• Major Characteristics and Fire Test Video
• Physical Properties
• Material Characteristics
• What are the applications ?
• Suitability Guide
• Packaging

Sinicon PP - Plastering (Old and New Buildings)

• Highlights
• Benefits
• Typical Applications
• Plaster Methods
• How to mix Sinicon PP with Cement
• Surface preparation for plastering
• Plastering on wall/ceiling/roof deck
• Curing Methods

 What is Sinicon PP ?

It is a unique volcanic glass, a large deposit of which is found at only one location on the earth which is South Africa. Sinicon PP is made out of feed from this mines using patented manufacturing process to convert this volcanic glass into well-sealed tough glass granules which is ideally suited for use with cementitious and other binders.

How a SINICON PP Cement Plaster mortar application specification (Example) to be prescribed?

Wall and Ceiling Plastering

Provide and apply 12mm thick single coat internal, external and ceiling plaster with Sinicon PP and cement heat proofing mortar at a ratio of 3:1 (Sinicon PP : Cement) with adequate water content for all plain / curved surfaces of brick / block / RCC walls and finishing the same in correct line, level and plumb, making of edges, corners, still, grooves etc. as per drawings and relevant specifications including all necessary surfaces preparations as per Sinicon PP heat proofing plaster methods; cleaning with wire brush to remove fungus / dusts, hacking of surfaces to receive plaster if surface is smooth, wetting and cement grouting of surfaces, curing after application for 14 days, cleaning etc. complete at all levels and all heights. Apply base coat and top coat painting as per specification.

Roof Plastering (Screeding)

Provide and apply minimum 24mm thick single coat roof plaster (screed) with Sinicon PP and cement mortar at a mix ratio of 3:1 (Sinicon PP : Cement) with adequate water content for all plain / slope surface of RCC roof and finishing the same in correct gradient to ensure water is not accumulated anywhere on the roof surface and the corners joints / junctions of roof and retain wall chambered to avoid water seepage as per Sinicon PP heat proofing plastering methods, cleaning with wire brush to remove fungus / dusts, hacking of concrete surface to receive plaster, washing, wetting and cement grouting of surface, curing after application for 14 days, cleaning etc. complete at all the roof surfaces. Apply base coat of white cement as per specification.

Applications :

• For clean water without abrasives, which are non-aggressive for the pump
• Domestic water supply and booster
• Cleaning and washing
• Gardening

Construction :

Close-coupled, peripheral centrifugal pump, electric-motor with extended shaft directly connected to the pump.

Special features on request

• Other voltages and frequency
• Higher or lower flow and head
• Material of construction
• Operating condition
• IP standard

Construction

Close-coupled, single stage centrifugal pump, electric-motor with extended shaft directly connected to the pump.

Operating Conditions

Liquid temperature from 0°c to +40°c ambient temperature +40°c suction lift up to 6m max. Working pressure upto 6 bar

Applications

• For clean water without abrasives, which are non-aggressive for the pump
• Domestic water supply and booster
• Raw water transfer and filter feed
• For heating, air-conditioning and circulations plants
• Small irrigation

Special Features on Request

• Other voltages and frequency
• Higher or lower flow and head
• Material of construction
• Operating condition
• IP Standard

Construction

Close-coupled, submersible centrifugal pump with electric-motor by an extended shaft directly connected.Water lubricant bush and thrust bearings.

Operating Conditions

Liquid temperature from 20-40°C Min. submersion 1.5M Max. Working pressure upto 4 bar

Applications

• For clean water without abrasives, which are non-aggressive for the pump
• Domestic water supply
• Raw water transfer
• Dewatering
• Small irrigation
• Fountains

Special Features on Request

• Other voltages and frequency
• Higher or lower flow and head
• Material of construction
• Operating condition

Sinicon water switch effectively monitors and controls water/liquid levels in the overhead tank, sump, and well etc. It prevents overhead tank from overflowing and also prevents overflowing of sump, well etc. Thanks to sinicon water switch, the user need not worry about switching the electric water pump on and off and makes water available round the clock.

Functions & Features

• Fully Automatic Operation
• Switches water pump on when overhead tank is empty and switches water pump off when overhead tank is full
• Switches water pump off when sump/well is empty and allow pump to run only when the sump/well is filled up to the set limit.
• Extremely easy to install
• Fit and forget type and no routine maintenance required.

Applications

• Villas, apartments, sewage plants, water treatment plants, mixing and filling plants etc.
• Special features on request
• Higher water columns (9535)
• Cable length (9525)

Sinicon waterswitch system (ia & iia); consists 1 no. Switchmate and 1 no. Waterswitch for system ia configuration and 1 no. Switchmate and 2 nos. Waterswitch for system iia configuration, effectively monitor and controls water/liquid levels in the overhead tank, sump, well etc. It prevents overhead tank from overflowing and also prevents overflowing of sump, well etc. Thanks to sinicon waterswitch system, the user need not worry about switching the electric water pump on and off and it makes water available round the clock.

Functions & Features

• Fully Automatic or Manual Operation.
• Switches water pump on when overhead tank is empty and switches water pump off when overhead tank is full.
• Switches water pump off when sump/well is empty (even while the overhead tank is empty) and allow pump to run only when the sump/well is filled up to the set limit.
• Extremely easy to install and operate.
• Fit and forget type and no routine maintenance required.
• Single switch operation for auto/off-reset/manual operations.

Sinicon waterswitch system (id, iid, idt, iidt); consists 1 no. Controller and 1 no. Waterswitch for system id/idt configuration and 1 no. Controller and 2 nos. Waterswitch for system iid/iidt configuration, effectively monitor and controls water/liquid levels in the overhead tank, sump, well etc. It prevents overhead tank from overflowing and also over pumping of sump, well etc. Thanks to sinicon waterswitch system, the user need not worry about switching the electric water pump on and off and it makes water available round the clock.

The controller (model 9526b) in the waterswitch system prevents pump from running when the sump is empty, or during low voltage, high voltage and dry run situation, thus avoiding damage to motor resulting in increased profitability, cost saving in electricity and maintenance.

Functions & Features

• Fully automatic or manual operation.
• Switches water pump on when overhead tank is empty and switches water pump off when overhead tank is full.
• Switches water pump off when sump/well is empty (even while the overhead tank is empty) and allow pump to run only when the sump/well is filled up to the set limit.
• Extremely easy to install and operate.
• Fit and forget type and no routine maintenance required.
• Single switch operation for auto/off-reset/manual operations.
• Low/high voltage protection and dry run protection to motor.

Special Features on Request

• Other voltage and frequency
• Operation conditions
• Higher capacity

Sinicon WaterSwitch System (ID, IID, IDT, IIDT); consists 1 No. Controller and 1 No. WaterSwitch for System ID/IDT configuration and 1 No. Controller and 2 Nos. WaterSwitch for System IID/IIDT configuration, effectively monitor and controls water/liquid levels in the overhead tank, sump, well etc. It prevents overhead tank from overflowing and also over pumping of Sump, well etc. Thanks to Sinicon WaterSwitch System, the user need not worry about switching the electric water pump ON and OFF and it makes water available round the clock.

The Controller (Model 9526B) in the WaterSwitch System prevents pump from running when the sump is empty, or during low voltage, high voltage and dry run situation, thus avoiding damage to motor resulting in increased profitability, cost saving in electricity and maintenance.

Functions & Features

• Fully automatic or manual operation.
• Switches water pump ON when overhead tank is empty and switches water pump OFF when overhead tank is full.
• Switches water pump OFF when sump/well is empty (even while the overhead tank is empty) and allow pump to run only when the sump/well is filled up to the set limit.
• Extremely easy to install and operate.
• Fit and forget type and no routine maintenance required.
• Single switch operation for auto/off-reset/manual operations.
• Low/high voltage protection and dry run protection to motor.

Special Features on Request

• Other voltage and frequency
• Operation conditions
• Higher capacity

Sinicon ComboStarter AT System is a Digital Electronic Starter with built-in WaterSwitch based automatic Water Level Controller and programmable ON/OFF timer. It prevents overhead tank from overflowing and also prevents the overpumping of sump, well etc. The user need not worry about switching the electric water pump ON and OFF and it makes water available round the clock.

The easily programmable timer helps programme the water pumping duration based on the water availability in a bore-well for domestic and/or agricultural applications. The ComboStarter also prevents pump from running when well is empty, or during low or high voltage or dry-run situation, thus avoiding damage to motor resulting in increased availability, cost saving in electricity and maintenance.

Super Auto Function with Artificial Intelligence : If you are not sure of water availability in the bore-well and that you do not know how much time pump can be operated, then leave it to ComboStater AT. It takes care of the water availability in bore-well, possible pumping duration etc through an innovative intelligent system and makes the best out of the bore-well. 

Special Features on Request

• Other voltage and frequency
• Operation conditions
• Higher capacity
• Real Clock time ON/OFF

Functions & Features

• Single phase motor starter for single motor application with built-in timer controlled water level control function.
• Motor starts and stops as per cyclic timer programmed interval.
• Programmable over voltage protection, under voltage protection and overload protection. Multiple protections for dry-run through sensor as well as with current sensing.
• Manual operation for bypassing all water level control functions, dry-run, over voltage, under voltage and overload protections.

Sinicon ComboStarter AT1 System is a Digital Electronic Starter with built-in WaterSwitch based automatic Water Level Controller and programmable ON/OFF timer. It prevents overhead tank from overflowing and also prevents the overpumping of sump, well etc. Thanks to Sinicon ComboStarter , the user need not worry about switching the electric water pump ON and OFF and it makes water available round the clock.

The easily programmable timer helps to programme the water pumping duration based on the water availability in a bore-well for domestic and/or agricultural applications. The ComboStarter also prevents pump from running when sump/.well is empty, or during low or high voltage or dry-run situation, thus avoiding damage to motor resulting increased availability, cost saving in electricity and maintenance.

Super Auto Function with Artificial Intelligence : If you are not sure of water availability in the borewell and that you do not know how much time pump can be operated then leave it to ComboStater AT1. It takes care of the water availability in borewell, possible pumping duration etc through an innovative intelligent system and makes the best out of the borewell

Applications

Villas, apartments, water treatment plants, mixing and filling plants, agricultural watering etc.

Functions & Features

• Single phase motor starter for single motor application with built-in timer controlled water level control function.
• Motor starts and stops at programmed time interval.
• Programmable over voltage protection, under voltage protection and overload protection. Multiple protections for dry-run through sensor as well as with current sensing.
• Manual operation for bypassing all water level control functions, dry-run, over voltage, under voltage and overload protections.

Special Features on Request

• Other voltage and frequency
• IP Standard
• Higher capacity
• Cyclic Timer ON/OFF

Sinicon ComboStarter Panels are motor control panels with programmable timer (Real time or Cyclic) controlled water level control system integrated for the purpose of switching single or dual motors (in a run/standby motor configuration) automatically; it is primarily used for automatically filling the water tank whenever the tank is empty and/or at pre-determined times in a day and can also be used for emptying the tanks/flood water etc.

It also can be used as a normal pump control panel .

Super Auto Function with Artificial Intelligence : If you are not sure of water availability in the bore-well and that you do not know how much time pump can be operated then leave it to ComboStater, It takes care of the water availability in bore-well, possible pumping duration etc through an innovative intelligent system and makes the best out of the bore-well. This feature available only in cyclic timer mode

Applications

• Villas, apartments, water treatment plants, mixing and filling plants, agricultural watering, sewage plants, industrial use etc
• Pressure pumping.
• Fire water pumping.

Functions & Features

• 3 phase motor control panel with timer controlled water level control function.
• Water level controller for single or dual run/standby configuration motors.
• Motor starts and stops at desired time in a day.
• Start time and stop time is programmable for 32 slots in a day.
• Over voltage, under voltage and multiple dry run protection.
• Over voltage and under voltage limit is programmable.
• Single phase prevention/phase loss prevention
• Automatic Overload protection and Optional Manually adjustable thermal overload relay.
• Manual operation for bye-passing all water level control functions, over voltage, under voltage and dry run protections.
• In case of dual motors in a run/standby mode, both motors can be run alternatively one after other. Also during dry run, if run motor trips the standby motor starts automatically.
• LCD display for easy reading and also for programming.
• Energy Saver
• No Routine maintenance required

Special Features on Request

• Other voltage and frequency
• Operation conditions/ IP Standard
• Higher Capacity
• RS 232/RS 485 Communication