Sinicon Controls Private Limited

Palakkad, Kerala

Combo Starter Panels

Sinicon Combo Starter Panels are motor control panels with programmable timer controlled (Real time or Cyclic) water level control system integrated for the purpose of switching single or dual motors (in a run/standby motor configuration) automatically; It is primarily used for automatically filling the water tank whenever the tank is empty and/or at pre-determined times in a day and can also be used for emptying the tanks / flood water / Drainage etc.

It can be used as a normal pump control panel also

Features

• 3 Phase Motor Control Panel with Timer controlled Water Level Control Function
• Motor starts and stops at desired time in a day.
• Over Voltage, under Voltage and Multiple Dry Run Protection.
• Single Phase Prevention/Phase Loss Prevention
• Manual Operation for By-passing all Water Level control functions, over voltage, under voltage and dry run protections.
• In case of dual motors in a Run/Standby mode, both motors can be run alternatively one after other, if run motor trips due to overload, No load (Motor issue) the standby motor starts automatically.**
• Auto Start of motor after 30 minutus if an Electrical Dry run occurs

Optional Features on Request

• Other Voltage and Frequency
• Operation Conditions/IP Standard
• Higher Capacity
• RS 232/RS 485 Communication
• Water level controller for Single or Dual Motor Configuration
• Start time and stop time is programmable for 16 slots in a day with real time mode
• Programmable over voltage and under voltage limits
• Automatic Overload protection and Manually adjustable thermal overload relay.
• LCD display for easy reading and also for programming.
• Energy Saver
• Buzzer for Motor related trip conduction
• No Routine Maintenance required

Water Control Systems

Sinicon Water Control System effectively monitor and controls water/liquid levels in the overhead tank, sump, etc. It prevents overhead tank from overflowing and also overpumping of sump, well etc. Thanks to Sinicon Water Control System, the user need not worry about switching the electric water pump ON and OFF manually and it makes water available round the clock

Functions and Features

• Replaces Pump Panel
• Full Automatic or Manual Operation
• Electronic starter with built-in water level control function for pumps

WC9526ME3

• 3 Phase operation
• Automatic or Manual water pumping operation
• Suitable for Pumps up to 8HP in DoL
• High voltage and Low Voltage Protection, Dry Run Protection
• Single Phase Preventer and Overload Protection

Water Control Systems

Sinicon Water Control System effectively monitor and controls water/liquid levels in the overhead tank, sump, etc. It prevents overhead tank from overflowing and also overpumping of sump, well etc. Thanks to Sinicon Water Control System, the user need not worry about switching the electric water pump ON and OFF manually and it makes water available round the clock

Functions and Features

• Replaces Pump Panel
• Full Automatic or Manual Operation
• Electronic starter with built-in water level control function for pumps

WC9526ME3 SD

• 3 Phase operation
• Automatic or Manual water pumping operation
• Suitable for Pumps up to 20HP in Star Delta
• High voltage and Low Voltage Protection, Dry Run Protection
• Single Phase Preventer and Overload Protection

Combo Starter Panels

Sinicon Combo Starter Panels are motor control panels with programmable timer controlled (Real time or Cyclic) water level control system integrated for the purpose of switching single or dual motors (in a run/standby motor configuration) automatically; It is primarily used for automatically filling the water tank whenever the tank is empty and/or at pre-determined times in a day and can also be used for emptying the tanks / flood water / Drainage etc.

It can be used as a normal pump control panel also

Features

• 3 Phase Motor Control Panel with Timer controlled Water Level Control Function
• Motor starts and stops at desired time in a day.
• Over Voltage, under Voltage and Multiple Dry Run Protection.
• Single Phase Prevention/Phase Loss Prevention
• Manual Operation for By-passing all Water Level control functions, over voltage, under voltage and dry run protections.
• In case of dual motors in a Run/Standby mode, both motors can be run alternatively one after other, if run motor trips due to overload, No load (Motor issue) the standby motor starts automatically.**
• Auto Start of motor after 30 minutus if an Electrical Dry run occurs

Optional Features on Request

• Other Voltage and Frequency
• Operation Conditions/IP Standard
• Higher Capacity
• RS 232/RS 485 Communication
• Water level controller for Single or Dual Motor Configuration
• Start time and stop time is programmable for 16 slots in a day with real time mode
• Programmable over voltage and under voltage limits
• Automatic Overload protection and Manually adjustable thermal overload relay.
• LCD display for easy reading and also for programming.
• Energy Saver
• Buzzer for Motor related trip conduction
• No Routine Maintenance required

Water Control Systems

Sinicon Water Control System effectively monitor and controls water/liquid levels in the overhead tank, sump, etc. It prevents overhead tank from overflowing and also overpumping of sump, well etc. Thanks to Sinicon Water Control System, the user need not worry about switching the electric water pump ON and OFF and it makes water available round the clock

Water Control Systems

Sinicon Water Control System effectively monitor and controls water/liquid levels in the overhead tank, sump, etc. It prevents overhead tank from overflowing and also over pumping of sump, well etc. Thanks to Sinicon Water Control System, the user need not worry about switching the electric water pump ON and OFF and it makes water available round the clock

Functions and Features

• Replaces Bore well Panel
• Full Automatic or Manual Operation
• Electronic Starter with Built-in Water Level Control function for Bore well Pumps
• Timer Contact (2 to 4 seconds) for Capacitor Starter Application
• Suitable for Capacitor Start and Induction Run Motor

WC9526AT

• Automatic or Manual Water Pumping operation
• ON & OFF Cycle Time Setting Function
• Suitable for Pumps up to 2HP (Starting Running capacitor given with the unit)
• High Voltage and Low Voltage Protection
• Overload Protection and Dual Dry Run Protection

Water Control Systems

Sinicon Water Control System effectively monitor and controls water/liquid levels in the overhead tank, sump, etc. It prevents overhead tank from overflowing and also over pumping of sump, well etc. Thanks to Sinicon Water Control System, the user need not worry about switching the electric water pump ON and OFF and it makes water available round the clock

Functions and Features

• Replaces Bore well Panel
• Full Automatic or Manual Operation
• Electronic Starter with Built-in Water Level Control function for Bore well Pumps
• Timer Contact (2 to 4 seconds) for Capacitor Starter Application
• Suitable for Capacitor Start and Induction Run Motor

WC9526MTE

• Automatic and Manual Water Pumping Operation
• Suitable for Pumps up to 2HP (Starting Running Capacitor given with the Unit)
• High Voltage and Low Voltage Protection
• Dry Run Protection