Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

Singhasini Engineers & Consultants

Singhasini Engineers & Consultants
location Vishnupuri, Kanpur, Uttar Pradesh

Verified Write a Review
View Number

Our Products

  1. Dryers 6 Products available
  2. Grinding Mill 4 Products available
  3. Ores And Minerals 3 Products available
  4. Pulverizers 3 Products available

  5. Material Handling Machines & Systems

    2 Products available

  6. Powder Mixers

    1 Products available

  7. Chemical Reactors & Process Tanks

    1 Products available

  8. Crushing Machines

    1 Products available

  9. Air Vents

    1 Products available

  10. Process Control Systems & Equipment

    1 Products available
  11. Others Products 19 Products available

Dryers

We offer the best product range of Spin Flash Dryer, Rotary Dryers, Tray Dryers, Industrial Dryer and Rotary Vacuum Dryer.

Spin Flash Dryer

Spin Flash Dryer
Tunnel and cupboard dryers are inherently costly to run, occupy a larger floor space, involve higher number of manual labor and yet the drying rate is slow with much lower thermal efficiency. Compared to this, the FLASH DRYER in its simplest form of mechanical design; is merely a Hot Air Conveyor into which solids, if reasonable free flowing, may be dropped. The material then gets dispersed, thus exposing maximum surface to the drying process. This leads to a very rapid drying rate and the time required is in seconds and not in minutes or hours. Due to the short exposure time and rapid evaporation of water, even though high temperature is employed; the material remains at wet bulb temperature (W.B.T.) until all traces of surface moisture is removed. Thus it is possible to employ high inlet temperature, may be up to 700 C, without affecting the quality of the material, which may even, if it is a heat sensitive one.
Ask Latest Price & Details
Rotary Dryers

Rotary Dryers
Rotary Dryer operated at almost atmospheric pressure consists of a M.S.Cylindrical shell, ranging in length from four to ten times its diameter, into which the wet charge is fed continuously at one end and is discharged at the other, the movement of the material being due usually to the combined effect of inclination of the shell to the horizontal and the action of internal lifting flights during the rotation of the shell. The latter is usually provided with machined girth rings supported on suitable designed bearings. Rotation of the shell is secured by the action of suitable gearing. Hot air produced from Hot Air Generator (Direct or Indirect ) is injected into the dryer to achieve the required dryness of the material . The discharge end of the Rotary Dryer consists of sealing arrangement , Cyclone and Dust Collector.
Ask Latest Price & Details
Tray Dryers

Tray Dryers

SINGHASINITray Dryer consists of rigid angle iron frame covered with heavily insulated glass wool on all sides to prevent heat losses from the dryer and mild steel sheet covering , provided with fresh air inlet & adjustable air outlet. The Dryer is finished internally with SS316 / SS304 or Aluminum sheet or heat resistant Aluminum paint to minimize heat losses . Heating is done with electrical heaters / steam heaters or indirect fired hot air generators to achieve required temperature . Cross flow air circulation is maintained in the dryer in such a way that hot air passes over the trays and through it on the sides where it is reheated and recirculated to continue the cycle. A part of air is bled off to reduce moisture content.SINGHASINItray Dryers are available in 48 , 96 , 192 trays with Aluminum trays and M.S. trolleys . Explosion safety door is available for special application dryer . Dryer is provided with Pre-wired control panel consisting of Digital Temperature Controllers , Contactors , Over Current Relays , Fuses , Indicating Lamps , Push Buttons etc etc.

MODEL STD 48 STD 96 STD 192
Nos. Of Trays 48 96 192
Nos. Of Fans One Two Four
Nos.Of Motor / H.P. One/1.0 Two/2.0 Four/4.0
Heating Load 100 /150 Deg C 6/9 12/18 24/36
Nos. Of Doors One Two Two
Size Of Tray 32 x 16 x 1.25 32 x 16 x 1.25 32 x 16 x 1.25
Power Supply AC,3Ph,415V,50Hz AC,3Ph,415V,50Hz AC,3Ph,415V,50Hz
View Complete Details
Ask Latest Price & Details
Industrial Dryer

Industrial Dryer
  • Min. Order (MOQ) 1 Set(s)
  • Brand Name SINGHASINI
We are offering industrial dryer. Tunnel and cupboard dryers are inherently costly to run, occupy a larger floor space, involve higher number of manual labor and yet the drying rate is slow with much lower thermal efficiency. compared to this, the flash dryer in its simplest form of mechanical design; is merely a hot air conveyor into which solids, if reasonable free flowing, may be dropped. the material then gets dispersed, thus exposing maximum surface to the drying process. this leads to a very rapid drying rate and the time required is in seconds and not in minutes or hours. due to the short exposure time and rapid evaporation of water, even though high temperature is employed; the material remains at wet bulb temperature (w.b.t.) until all traces of surface moisture is removed. thus it is possible to employ high inlet temperature, may be up to 700 c, without affecting the quality of the material, which may even, if it is a heat sensitive one. Types of flash dryers: flash drying system are designed for specific problems and may fall into one of the following categories:1.flash drying without disintegration or pulverisation. 2.flash drying with disintegration. 3.flash drying with pulverisation.

Additional Information:

Payment Terms : L/C, T/T, Western Union

Packaging Details : All delicate items are packed in sea worthy packing.

Delivery Time : 2 Months

View Complete Details
Ask Latest Price & Details
Rotary Vacuum Dryer

Rotary Vacuum Dryer
In a chemical Industry, of all the Unit Operations Drying has the widest application and a proper appreciation of the mechanism of drying and the equipment available to resolve a drying problem on an industrial scale is correspondingly important. Most manufacturing operations, particularly in the chemical and metallurgical fields, entail one or more stages where drying is one form or another is carried out. Drying costs account for a large portion of the processing costs associated with the manufacture of Chemicals, Pharmaceuticals, Dye Stuffs and other products. A Filter Press or a Centrifuge is often used to remove as much water or solvent as possible, there by reducing the heat load in the drying process. Mostly and unfortunately the cake is normally dried in a tray dryer, where the energy consumption is excessively high. Apart from high energy costs, tray dryers also have high labor cost for loading and unloading of the product. Product loss due to manual loading and unloading long drying time and generally dirty operating area.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us