Our Products
Bolts
1 Products availableWashers
1 Products availableWires
1 Products availableWe are leaders in the market for providing best range of Acorn-Dome Nut, Flange Nut, Flange Nylock Nut, Metal Insert Flange Lock Nut and Nylon-Metal Insert Flange Lock Nut
acorn-dome nut- an acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (uk), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread of the threaded fastener, either to protect the thread itself or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance. acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon. They can also be chrome plated and given a mirror finish.
Flange nut- a flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. These nuts are mostly hexagonal in shape and are made up of hardened sheet and often coated with zinc. the flange may be serrated to provide a locking action. The serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations they cannot be used with a washer or on surfaces that must not be scratched. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of nut. the flange nuts are sometimes provided with a swivel flange which helps in creating a more stable structure without affecting finished product like a serrated flange nut. Swivel flange nuts are mostly used in joining wood and plastic. [1] sometimes both faces of the nut are serrated, permitting either side to lock.
Flange nylock nut- a flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. These nuts are mostly hexagonal in shape and are made up of hardened steel and often coated with zinc. the flange may be serrated to provide a locking action. The serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations they cannot be used with a washer or on surfaces that must not be scratched. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of nut. the flange nuts are sometimes provided with a swivel flange which helps in creating a more stable structure without affecting finished product like a serrated flange nut. Swivel flange nuts are mostly used in joining wood and plastic. [1] sometimes both faces of the nut are serrated, permitting either side to lock.
Metal insert flange lock nut- a flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. These nuts are mostly hexagonal in shape and are made up of hardened steel and often coated with zinc. the flange may be serrated to provide a locking action. The serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations they cannot be used with a washer or on surfaces that must not be scratched. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of nut. the flange nuts are sometimes provided with a swivel flange which helps in creating a more stable structure without affecting finished product like a serrated flange nut. Swivel flange nuts are mostly used in joining wood and plastic. [1] sometimes both faces of the nut are serrated, permitting either side to lock.
Nylon-metal insert flange lock nut- a nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
Square weld nut (jisb-1196--din 927)- a nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
Additional Information:
Payment Terms : T/T
Wing nuts din 315 (ansi b 18.17)-- a t-nut, t nut, or tee nut (also known as a blind nut, [1] which can however also refer to a rivet nut or an insert nut) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface. it has a long, thin body and a flange at one end, resembling a t in profile. The flanges of t-nuts often have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention. in 1969, the first four-prong t-nut with the eight-sided base was patented. Unlike the standard round base t-nuts, the eight-sided t-nuts can be fed efficiently and reliably via machine. The eight-sided t-nut base has become the standard configuration for t-nuts inserted by machine.
Additional Information:
Payment Terms : L/C, T/T
Nylock nuts- a nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together.
The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
Additional Information:
Payment Terms : L/C, D/P, Western Union
Packaging Details : As per customer requirement
Delivery Time : Within 1-2 Days
we are importes of tee nuts. We import nuts from china. Our main products are :- nylock nut, hex nut, tee- nut, wedge anchor, self drilling scews, drywall screws, drop in anchor, flange nut, dome nut, wing nut, rivet/insert nut, socket haed cap screws (allen bolts), spring washers etc.
we always have the stock of most of these items. In case we do not have the stock then we will provide you the material within a determined period of time.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Packaging Details : As per customer requirement.
Delivery Time : Within 1-2 Days
we are importers of fasteners. We import the fasteners from china. We are having the fasteners under the brand name - "sturdfix". Our main products include :- nylock nut, wing nut, hex nut, wedge anchor, flange nut, dome nut, insert/rivet nut, socket head cap screws (allen bolts), spring washer, self drilling screws, drywall screws, drop in anchor etc.
we are having the availability of most of these items in our stock. In case we do not have the stock available, then we will supply you that material in a determined period of time.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Packaging Details : As per customer requirement.
Delivery Time : Within 1-2 Days
we are importers of fasteners. We import the fasteners from china. We are having the fasteners under the brand name - "sturdfix". Our main products include :- nylock nut, wing nut, hex nut, wedge anchor, flange nut, dome nut, insert/rivet nut, socket head cap screws (allen bolts), spring washer, self drilling screws, drywall screws, drop in anchor etc.
we are having the availability of most of these items in our stock. In case we do not have the stock available, then we will supply you that material in a determined period of time.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : As per customer requirement.
Delivery Time : Within 1-2 Days
we are importers of fasteners. We import the fasteners from china. We are having the fasteners under the brand name - "sturdfix". Our main products include :- nylock nut, wing nut, hex nut, wedge anchor, flange nut, dome nut, insert/rivet nut, socket head cap screws (allen bolts), spring washer, self drilling screws, drywall screws, drop in anchor etc.
we are having the availability of most of these items in our stock. In case we do not have the stock available, then we will supply you that material in a determined period of time.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Packaging Details : As per customer requirement.
Delivery Time : Within 1-2 Days