Our Products
Pneumatic Presses
2 Products availableIndustrial Machinery
1 Products availableBending Machines
1 Products availableBoiler And Boiler Parts
1 Products availableWire Forming Machinery
1 Products availableSurface Finishing Machines
1 Products availableWe are leaders in the market for providing best range of 3-Station Quench Press (25T), 3-Station Quench Press (63T), 3-Station Quench Press (3SQP-75), 3-Station Quench Press (40T) and Single Station Quench Press (40T)
SIMPLETEC hydraulically operated 3-Station 25T Quench Press is designed to press-quench small components like bearing races, gear blanks, etc., in closed dies. Quench pressure, time and oil flow can be set precisely. The pressing force and the quench oil flow can be seen on a HMI provided in the electric panel. Each station can be operated independently by one operator. Except loading of components, all other operations are automatic. Pick & Place Manipulators for automatic loading of components can also be provided.
SIMPLETEC hydraulically operated 3-Station 63T Quench Presses is a heavy duty machine used for heavier components. Each of the three stations works independently and can be set for different components, if required. All operations, except loading of components, are automatic. Pick & Place Manipulators for automatic loading of components can also be provided. The ram pressing force can be precisely set from 6.5T to 63T. Pressing force and quench oil flow can be seen on the HMI provided in the electric panel of the machine.
3-Station Quench Press (3SQP-75) that we offer is a hydraulically operated 3-Station 75 Quench Presses, which is a heavy duty machine used for very heavy components. Each of the three stations works independently and can be set for different components, if required. All operations except loading of components are automatic. Our 3-Station Quench Press is also provided along with pick & place manipulators for automatic loading of components. The ram pressing force can be precisely set from 7.5T to 75T. Further, pressing force and quench oil flow can be seen on the HMI provided in the electric panel of our 3-Station Quench Press machine. Our 3-Station Quench Press can also be equipped with Secondary Quench System, completed with conveyor, for the removal of the components after the quenching operation. Also, the secondary quench time can be set as required by selecting the conveyor speed.
SIMPLETEC hydraulically operated 3-Station 40T Quench Presses is most commonly used quench press in the bearing industries. Each of the three stations works independently and can be set for different components, if required. All operations, except loading of components, are automatic. Pick & Place Manipulators for automatic loading of components can also be provided. The ram pressing force can be precisely set from 5T to 50T. Pressing force and quench oil flow can be seen on the HMI provided in the electric panel of the machine.
The quench press can also be equipped with Secondary Quench System, complete with Conveyor for removal of the components after the quenching operation. The secondary quench time can be set as required by selecting the conveyor speed.
SIMPLETEC Hydraulic 40T Quench Presses is similar to the 25T Quench Press, but of higher capacity. Like the 25T machines, the hydraulically operated 40T Quench Press is a very fast and easy to operate. Except loading of components, all other operations are automatic.
Loading of component from the furnace can be made automatic with the help of Pick & Place Manipulators. Secondary Quench System and quench oil Chilling Unit can also be supplied with the machine. System pressure and quench oil flow can be precisely set as required and can be seem on a HMI provided in the electric panel of the machine.
SIMPLETEC hydraulically operated 3-Ram 40T Quench Press, designed for gears, bearing races, etc., is a single station hydraulic quench press. The outer ring pressing force is 15T, the inner ring pressing force is also 15T and the pressing (or expansion) force of the plug is 10T. All the pressing forces can be independently set. Quench pressure, time and oil flow can be set precisely as required and measured. Pressing forces of the inner ring, outer ring and the plug can be seen on the HMI provided in the electric panel of the machine. Except loading of components, all other operations are automatic. Pick & Place Manipulators for automatic loading and un-loading of components, Secondary Quench System and quench oil Chilling Unit can also be provided. (Photograph shown is without the quench oil guards).
SIMPLETEC Hydraulic Quench Presses are offered in various capacities from 25 T to 150 T or higher. The hydraulically operated 25T Quench Press is a very fast and easy to operate. Except loading of components, all other operations are automatic. Loading of component from the furnace can also be made automatic with the help of Pick & Place Manipulators. The machine is suitable for small components. Secondary Quench System and quench oil Chilling Unit can also be provided.
System pressure and quench oil flow can be precisely set as required and can be seem on a HMI provided in the electric panel of the machine.
SIMPLETER hydraulically operated 50T Quench Press is designed for heavy components. Like the 25T and the quench presses, this machine also has automatic component locating/centering mechanism and automatic component ejection unit. Except loading of components, all other operations are automatic. Pick & Place Manipulators for automatic loading of components, Secondary Quench System and quench oil Chilling Unit can also be supplied with the machine.
The pressing force can be set from 5T to 50T and the set pressure can be seen on the HMI provided in the machine along with the quench oil flow to the component. A digital quench oil temperature indicator can also be provided.
Our precision designed Single Station Quench Press (QP-75T) is widely in demand by the clients owing to its high operational efficiency, low maintenance and easy usage. Single Station Quench Press that we manufacture and export is hydraulically operated 75T Quench Press, which is highly recommended for very heavy components. Single Station Quench Press has all the features of the 50T machine but it is of much higher capacity.
We offer precision-engineered 2-Station Quench Presses. The Pneumatic 2-Station 7.5T Quench Press is designed to press quench components like bearing races, gears, etc., in closed dies. During pressing and quenching, the pneumatically operated toggle comes in line of the component and tool axis and there by does not allow the top tool to move up even at a very high reactionary force due to expansion of the component during quenching. Quench time and oil flow can be set precisely and monitored with the HMI provided in the electric panel of the machine. The 2-Station Quench Presses are of extremely robust construction. All operations of these 2-Station Quench Presses, except loading and unloading of components, are automatic. Further, manipulators for automatic loading and/or unloading of components can also be provided.
We are a reputed Manufacturer and Exporter of Quench Press (25T). The hydraulically operated Quench Press (25T) is very fast and easy to operate. Except loading of components, all other operations of the Quench Press (25T) are automatic. Loading of component from the furnace can also be made automatic with the help of Pick & Place Manipulators. Quench Press (25T) is suitable for small components. Secondary Quench System and quench oil Chilling Unit can also be provided. The system pressure and quench oil flow can be precisely set as required and can be seem on a HMI provided in the electric panel of the Quench Press (25T). SIMPLETEC Hydraulic Quench Presses are offered in various capacities from 25 T to 150 T or higher.