Silverline Metal Engineering Pvt. Ltd.

Mulund, Mumbai, Maharashtra

Following the guidance of our skilled professionals, we manufacture these very fine qualities End Caps. These end caps are used to cover the festoon tracks from both the ends. It prevents the entering of dust and other particles and makes the system look aesthetically beautiful.

Control panel Suitable for two speed motors well as for VVVF drive can be manufactured as per customers designs.


Features of Control Panel for EOT Cranes :

- Durable
- Easy installation
- Shock proof
- Safe usage
- Vast application
- Robust construction
- Custom made control panel for cranes

We are leading manufacturer of Hook Pully block assembly. These wheels are made from cast iron or forged EN 8 material .

The hooks are manufactured by forging with EN 8 / EN 9 material. These are supplied with test certificate.

In DSL Bus Bar System to protect crane from single phasing we have come out with phase indicator system. We have used best quality L.E.D.Lamps with proper heat sink to obtain long life from the indicator the body of the indicator is powder coated this system are supplied with long wire which can be directly connected to bus bar or panel board of crane this indicator can also been used in factories or on machine to show phase failure


Specification for LED indication lamps :

• Light Source: Light Emitting Diode LEDs
• Indication color: RED/YELLOW/BLUE
• Color Rendering Index: 100
• Luminous: Each LED 8000 to 10000 mcd
• LED Size: 5mm Round Axial
• No. of Leds per indicator: 3 Nos.
• Working Voltage & Current: 250V AC & 350mA
• Max input Power: 2 W to 3W of Each Indicator
• Input Volts: 85V to 265V of each phase @ 50C/s
• Type of power supply: CCD switch mode power supply
• Life expectancy: 30000 burning hours at 90 deg. C
• Operating temperature: 45 degree
• Indication Light Assembly: 440mm x 40mm x 200mm L x H x W Powder Coated Metal Cabinet

Features :

• Available for single and double girder cranes
• Modular box type construction
• Completely machined fabrication giving perfect alignments and tolerances
• Forged wheels in CK 45 material or SEW IRON 800/2
• All drive units from 85 SEW Nord
• Gear drives directly coupled to wheels through hollow shaft
• Soft start/stop feature is standard
• AC Disc brakes are fitted as standard

We have designed a fabricated I Beam Stopper for restricting the movement of Hoist. It is easy to remove and fix on different locations which helps easy removable of for the purpose of maintenance without trying to remove wheels of hoist trolley.

This is a product widely used for looking the position of crane. Lot of accidents happen due to crane being moved by wind pressure and cause substantial damage to crane as well as other equipments if crane is left on rails without proper breaks can slide till end and fall down. This grippers are available in various capacities. This is a must for all cranes located close to seafaces

Our company is engaged in the manufacture and supply of the premium quality Transit mixer spare parts. We offer a wide range to our esteemed customers. These mixer accessories exhibit excellent durability and reliability. These products are highly demanded in the international market for sturdy construction and efficiency. These products are widely accepted in different industries due to their features of optimum reliability, good strength and long service life. We offer these at the market leading prices

• Transit mixer spares
• water pump
• gear box
• water pump accessories
• transit mixer drive
• drum roller assembly
• roller bearing skf
• air filter
• hydraulic filter
• Tried and tested technology in UAE harsh working conditions
• 6 cubic metre & 9 cubic metre mixer available for mounting on Indian truck.
• Mixers with power take off arrangements are also available.
• Drum and internal spiral are made with special grade wear resistant steel.
• Main frame is designed with rectangular hollow sections to give extra

The modeling and design of this equipment has been done in UAE and the Same is tried and tested with rigorous working conditions in UAE for long working hours and fast movement with rapid trips at long distance. The same technology is now incorporated in Indian build truck mixers.

The drum has been designed with higher thickness of special wear resistant steel to give maximum drum life. With proper maintenance the drum life can be enhanced further.

The drum roller supports are of very high capacity to take shocks of Indian bumpy roads.

The roller are properly sealed with double thrust bearings. Hydraulics and gear box which are vital parts of the machine are used from recognized imported brands with proven track records.

Silverline is in girder manufacturing since last 12 years. We at Silverline manufacture girders/build up beams required for cranes, bridges and suitable for large structures as Airports, Stadiums etc.

We help all renowned crane manufactures to build their cranes in our facility at Sharjah.

The Largest girder so far manufactured by us is 42 mtrs long and waying 14 tones single structure.

Sand blasting and epoxy painting is normal for all the girders.

We have in-house capability to design and manufacture any girders as per customers requirement.

Cable Reeling Drums are used for automatic reeling and unreeling of flexible trailing cables for power feeding of mobile machine, whose travel is mostly track bound.

Flat cables are best suited for festooning, gives extra life, due to flexibility of the cables and gives good look to the crane. Needs less space compared to use of Round cables for parking of trolleys. We maintain stock of standard cables as given below :

Flat cables available size :1.5mm to 35 mm
4 Core to 24 Core

Features:

- High conductivity
- Heat resistant
- Water proof
- Durable

Features:

• Modular wheel blocks in different sizes and capacities
• Steel fabricated and completely machined bodies
• Forged wheels in CK 45 material / SG IRON 800/2
• All Drive units from SEW NORD
• Gear drives directly coupled to wheels through hollow shaft
• AC disc brakes are fitted as standard
• Provided with or without gear drives

Silverline light crane systems are built with Light weight sheet metal Material. The finely designed profile is strong enough to carry load Up to 2000kgs. The structure can be designed to Suit the shop or standard design can be obtained from Silverline .

These profiles can be bolted in position and no welding is required on site. This Section can be bend to achieve small turning radius.

These profiles can be supplied in high quality antirust painting / hot dip galvanized steel. Long & cross Travel Movements Are Push Pull Type Which Reduces Power Consumption & Avoids Complicated Control Panels.


Same Track Profile can be used for :

• Monorail
• Jib Crane
• Heavy duty festoon system for high Tonnage cranes / Heavy Cables

Best Used For Following Applications :

• Small workshops or machine shops
• Assembly lines
• CNC machine shops
• Auto repair and maintenance shops
• Production lines

Advantages :

• High strength profile does not require heavy building structure
• Can be installed on self standing structure
• Needs minimum head room
• Smooth silent and easy travelling trolley needs no effort to move the load
• Minimum power required as long and cross travels are manually moved
• No complicated control panel boards
• Easy modification and expandable.
• Adoptable to hoist or chain block of any make
• Retractable balancers can be used in place of hoist.
• Making this system totally manually operated crane with out power
• Low cost design best suitable alternate for conventional high cost or high maintenance crane.

• High Strength Profile Does Not Require Heavy Building Structure
• Can Be Installed On Self Standing Structure
• Needs Minimum Head Room
• Smooth Silent And Easy Travelling Trolley Needs No Effort To Move The Load
• Minimum Power Required As Long And Cross Travels Are Manually Moved
• No Complicated Control Panel Boards
• Easy Modification And Expandable
• Adoptable To Hoist Or Chain Block Of Any Make
• Low Cost Design Best Suitable Alternate For Conventional High Cost Or High Maintenance Crane

The JIB Cranes made by Silverline offer.

Complete range of solution for the handling of loads up to 2.000Kgs, the JIB cranes are available in manually rotated on self standing column or wall mounted designed to handle the goods inside or on open area of the plant.

Jib crane can rotate up to 180 to 270 degrees. Jib crane capacity will be minimum 125 Kgs to maximum 2000 Kgs

Totally sheet metal fabricated design light body weight based on in-depth knowledge of sheet metal fabrication/painted to with stand severe weather conditions. Silverline has more than 25 years of experience in metal fabrication and design. We also manufacture light cranes which are technically innovative and offer excellent value for money. The components used are of the highest quality, which is long-lasting and economical built by Silverline, The leading Indian Company

We are suppliers , exporters, and manufacturers of monorail hoist world wide.These products are made up of high quality steel materials. we have featured with reliable safe mark and gorgeous design, single rails with larger capacity.

• Application
• Lathe
• Automobile industries.
• Mechanical lathes for east transportation of loads.

We at, Silver line Metal Engineering Private Limited are the well-known pioneers in manufacturing and exporting a wide range of Festoon Systems. These range of products manufactured using high grade raw materials. We manufacture these products known for its sturdy-built and consistent. The price of our products is very cost-effective. All the products are listed under the major categories as follows are Track for Trolley 4500 mm, C-Channel for Support 500 mm, Track Coupler, Track Clamp, Towing Trolley, Towing Arm, Wire Clip Plastic, End Stop, Flat Cable Trolley, Round Cable Trolley, Pendant Trolley, C - Channel Clit and Fixed Trolley.

Our EPR Rubber Cable is widely demanded by our clients as it is compatible with any extreme condition.

Features:

- High tensile strength- Chemical resistant- Durable- Fine finish


Core identification:
- 2 cores: Red & Black- 3 cores: Red, yellow & Blue- 4 cores: Red, Yellow, Blue & Green- 5 cores: Red, Yellow, Blue, Black & Green- 6 cores and above are numbered

We are manufacturer and exporters a wide range of cable trolley. All the products listed under this category are 4 wheelbeam cable trolley 50 mm (deluxe) suitable for 15 MB 100. It may be of hot dipped of galvanized steel and higher loads with 4 point suspection.

With this perspective we have come out with manufacturing of all type of accessories required for these bus bar system. We supply ceramic insulators, munks as well as gravity type current collectors suitable for Angle Iron or Rail type Bus bar system. Our range varies from 150 to 1200amps. We supply shoes made of cast iron, cast steel, Brass, Bronze or phosphor bronze, We can also manufacture and supply current collectors and accessories as per customers design and requirement.

We at, Silver line Metal Engineering Private Limited are the well-known pioneers in manufacturing and exporting a wide range of Festoon Systems. These range of products manufactured using high grade raw materials. We manufacture these products known for its sturdy-built and consistent. The price of our products is very cost-effective. All the products are listed under the major categories as follows are Track for Trolley 4500 mm, C-Channel for Support 500 mm, Track Coupler, Track Clamp, Towing Trolley, Towing Arm, Wire Clip Plastic, End Stop, Flat Cable Trolley, Round Cable Trolley, Pendant Trolley, C - Channel Clit and Fixed Trolley.

1. Silverline manufacture high quality tested chains required along with cranes, depending on customers requirement :

a. Chain slings with Hooks
b. Chain slings with Shakle
c. Chain loops

Available with various lengths and capacities.

2. Conveyors Chains / Transmission Chains / Slate Chain We produce conveyors chains as per customer specific requirements. We can design and supply any capacity conveyor system and chains required for material handling.

Cable Reeling Drums are used for automatic reeling and unreeling of flexible trailing cables for power feeding of mobile machine, whose travel is mostly track bound.


There are mainly three modes of drive for the drums:-

• CRD with spring Drive
• CRD with stall torque motor drive
• CRD with counter weight drive

The Cable Reeling Drum Consists of following main components:-

• Drum Body
• Slip ring Assembly
• Drive Motor
• Cable layering mechanism/guide arrangement
• Cable length limiting switch
• Over tension/under tension limit switch
• Cable Feeding Device
• Control and power supply Accessories

we offer a wide range of rail clamp, which is one of the reputed products in the market. We ensure our ranges of hi - grade raw materials used for manufacturing these clamps procured from dependable vendors. These products are preferred much for large scale industrial manufacturing purposes. All the products listed under this category are manufactured in compliance with international standards they are rail clamp - lbs 30 / 40 (with spring washer & bolt), rail clamp lbs-60 (with spring washer & bolt), rail clamps (with spring washer & bolt), rail clamp - lbs 105 (with spring washer & bolt), rail clamp lbs 120 (with spring washer & double bolt), forged rail clamp, forged block, machined block cr 100 / cor120, cup type rail clamp - lbs 60 (with spring washer & bolt) and end cap.

Presently most of the Crane manufacturers are using En 9 or En 8 material forgings for crane wheels. The wheels are manufactured in forging due to which we have to pay @ 30% more cost towards the basic Raw Material & this additional material we need to remove in machining by investing more machining time. Lead time for forgings is min 4 to 5 weeks from the date of order & 1 more week for machining, heat treatment & other finishing (e.g. bore grinding). It means we have to plan the material before 5 to 6 weeks.

In case of En 24, we need to have few more days for machining time due to high hardness as compare to En 9 To avoid high procurement time & heavy machining, we have developed these Crane wheel in SGI 800/2 material. Main property of this material is self lubrication & high strength.

Since these are castings, the delivery period of the material will be reducing to 3 weeks against of forging 5 to 6 weeks. Along with this we can save 15% to 20% in overall cost. We are giving the test certificate for every wheel with traceability for wheel No. The report will contain UT & actual hardness of wheel along with physical & chemical of material.

Sizes of the wheel is available from 150 mm to 630 mm (As per customer's requirement)

A comparison chart for En 9 & SGI 800/2 is given below for your reference.

Control panel Suitable for two speed motors well as for VVVF drive can be manufactured as per customers designs.

We at, silverline metal engineering private limited are the well-known pioneers in manufacturing and exporting a wide range of festoon systems. The festoon system is also known as enclosed C-track festoon system as the system is fully enclosed from all sides thus preventing the dust and dirt from entering the system and blocking it. We manufacture these products known for its better strength and load bearing capacity. It can take loads of more than 50kg / mtr.

Backed by the excellent state-of-art infrastructure, we manufacture and export an ample range of C-channel for support-500 mm. C-channels are used for supporting the festoon tracks. We use G.I. sheets for manufacturing these supports to prevent corrosion. The C-channels are fitted to the girder by bolting with C-channel cleat, which in turn is welded to the girder. It is available with us in the various lengths such as 250mm, 500mm, 700mm 800mm, 1100mm and 1400mm.

Made for heavy duty applications in particular for pendant push button stations and moving electromechanical components. The two steel wire ropes are embedded, diametrically opposed to PVC sheathing. The rope cut into length and just hooked to the pendant trolly to avoid any stress on the cable.

• Extensively Oil resistant Chemical Resistance
• Extremely small bending radius
• High Flexibility
• Minimum waste of space
• Packeting possibility
• PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/IEC60332-1 (equivalent DIN VDE0472 part 804 test method B)
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers

Under the able guidance of our trained professionals, we offer Light Sheet Metal Fabrication Products around the world. Our firm uses modern technologies and machineries for manufacturing each product. All our products are made of good quality raw materials purchased from leading markets. These are applicable in the industrial fields for getting reliable performance and long durability, the product listed under this category is Fabricated Parts.


Types :

• Motor Cooling Condenser
• Oil Skimmer Part
• Oil Skimmer
• Screw Conveyer
• Stainless Steel Fabricator
• Windmill Heat Exchanger
• Filter-Machine
• Oil-Separator
• Wind-Mill-Heat-Exchanger-Part

We are into manufacturing, supplying and exporting a wide range of Wear Plates & Cutting Rings. The rings offered by us are manufactured using superior quality raw material, which is sourced from the reliable vendors of the market. We offer these rings in various specifications to meet the variegated requirements of our clients.


Our offered rings are widely demanded by the clients for their following features:-

- Accurate Dimensions
- Strong Construction
- Temperature Resistance

We strives to provide innovative solutions for the construction industry in terms of natural stone based building and aesthetic material

Art comes alive.
We have a team of artisans who can bring to life any kind of intricate art on stone through engraving etching or sculpting. These artifacts can be used in offices, living spaces or public spots. These artifacts impart a unique character to the place.

I Beam trolley for carrying heavy cables in industries like Foundry, Rolling Mills, Storage Containers, Steel Mills. All types of I Beam trolley ranging up to 200 mm flange width. Also designed for heavy cable carriers trolley are available.

APPLICATIONS:

LDO, FO, HFO, Molassses, Soap stock, Tar, Bitumen, Paint, varnish, Crude oil, Lube oil, Veg oil, Jelly, Resin, Black liquor, Printing ink, Gum, latex, Massecuite etc.

FEATURES: :-

• Self- priming, high suction lift.
• Custom- made direction of rotation.
• Suction and delivery have BSP threaded connections.Flange connection can be given on request.
• High pressure/ High capacity /High temperature pumps can be manufactured as per the requirements.
• Pumps can be provided with motor, gear box, base plate coupling , guard, flanges, etc as required.
• No leakage due to static o Ring Sealing.
• Optional mechanical seal.
• Low cost in maintenance.
• Robust construction designed for long operational periods between routine maintenance.
• Interchangeability of spare parts makes maintenance economical.

We offer a wide range of Rail Clamp, which is one of the reputed products in the market. We ensure our ranges of hi - grade raw materials used for manufacturing these clamps procured from dependable vendors. These products are preferred much for large scale industrial manufacturing purposes.

Possessing well organized distribution network, we offer an assorted range of Track For Trolley-4500 mm to cater for huge industrial demand. We manufacture these tracks using finest quality G.I. sheets. The thickness is 1.5 mm and length of each track is 4500mm. The profile of the track is such that it can take higher loads than the conventional C-type tracks. It can take a total load of more than 50kg/metre. Since the track is made from G.I. sheets, there is no chance of corrosion. We give accurately rolled tracks so that there is no problem during the coupling of tracks.

These track clamps are used for clamping the festoon tracks to the C-channels. These are basically the link between the C-channel and the festoon track.

We at Silverline Metal Engineering manufacturer lot of parts from Mild steel, SS 304

And fabricate items enquiring high level of accuracy. We have been supplying there components to industries in USA, UAE and India.

We also do surface treatment like glass head Blasting, Zn Plating, Powder Coating and Epoxy Painting.

This coupler is used to join two festoon tracks. It has four bolts for stronger and better gripping of the tracks. We offer the coupler with a thickness of 2 mm, and is zinc plated to avoid corrosion.