Silicon Technolabs

Surat, Gujarat

This is basic 40 pin AVR development board with ZIF(Zero Insertion Force) socket for easy inserting and removing microcontroller from board. If you are starting with AVR microcontroller than this board is perfect for programming AVR microcontroller as well as for designing and testing AVR based projects.The board has onboard ATmega32 MCU(32K Flash Memory).The board is compatible with the ATmega16, ATmega32 and 40 Pin AVR microcontrollers.

Smps adapter SMPS based, 12V output with 1 Amp current capacity.Standard DC plug 2.1mm Inner Dia with positive center(+), Works on input of 90V to 270V AC.Output is regulated at 12V DC.

• FeatureAllows you to read or write the microcontroller flash, EEPROM, fuse bit and lock bits

This is ISP(In System Programmer) programmer therefor you can program your target microcontroller without removing it from your development board. This programmer will work with a wide variety of Atmel AVR and AT89SXX microcontroller. One of the greatest features of this board is the ability to power the target (up to 500mA) from the programmer.Allows you to read or write the microcontroller flash, EEPROM, fuse bit and lock bits, Two status LEDs Green Power LED, RED Turn on while Programmer busy.

This is a small and easy to use 1 channel relay board that operates on 5V. Use it to control one 240V power appliance lights, fans, etc directly from microcontrollers or low voltage circuits. The relay can handle a maximum of 7A240 V AC or 7A24V DC. Relay has all three connections - Common(COM), Normally Open(NO), Normally Closed(NC) brought out to 3 pin screw terminals which makes it easy to make and remove connections. The board has a power indication (RED) and a relay status (GREEN) LED to ease debugging. The board can accept inputs within a wide range of voltages from 3V to 5V. Power input and relay control signals are brought to 3 pin header pins on the board. Hence, the board can be easily interface with our development boards using our female to female jumper wires.

• Features5 mm standard DC plug-in jack for power supply

This is basic PIC development board with DIP(Dual in-line package) socket. This board is perfect for programming PIC microcontroller as well as for designing and testing PIC based projects.The board has on-board PIC16F877A MCU. The bridge rectifier allow this board to be powered with both AC and DC power supply adapters. Board has on board 5v power supply circuit, DB9 RS232 port for serial communication with computer and other serial device(GPS modules, GSM Modems, RFID Reader), power status LED(RED), Reset switch, User switch for input, User LED(GREEN) for output, and port extensions for all 5 ports. ICSP (In-Circuit Serial Programming) header port for easy programming using Pickit-2, Pickit-3 programmer.

• Production Capacity50
• Item CodeSTL002V1_0
• Delivery Time3-8 Working Day
• Packaging Details1 X Buzzer/Sensor/Relay/Led/Switch etc. Interfacing Board