Other Products / Services #2850663

• All transmission gears are made of high quality alloy steel (40Cr) grinded under high temperature with hardness > HRC42,
• Spraying circulation is adopted to lubricate the gears, reduce noise and prolong the service life.
• Anvil roller and mould roller adopts high-grade steel with fine reground and chrome plated surface.
• Balance correction enhances running stability
• Mould roller and anvil roller can be apart / released by the air cylinder eccentric mechanism during non-working condition in order to decrease the load of the machine and to prolong the life of the cutting mould and urethane rubber.
• Pneumatic lifting device working synchronous with the feeding system (During the feeding operation the mould roller pressed and when the feeding stops the mould roller released to ensure the correct die-cutting of every paperboard)
• Mechanical drive anvil roller transverse moves within 60mm and installed with radial differential device to spread wear evenly (every cutting at different position) and to improve the life of anvil roller lx407
• No matter how vary the diameter of anvil roller, unique speed difference compensation device makes the anvil roller slide together with mould roller so that the surface speed of anvil roller complies with it of the mould .roller, to make a perfect, uniformed die cutting. slotting machine could be made in good quality.
• Imported urethane (rubber) cover and its correction device to prolong the working life 3 to 4 corrections, 1 1.5mm each correction
• Planetary gear phasing structure, 360 degree motorized adjustment (run, brake, forward & backward)

1) Design speed:120m/min; Effective width:1400-2500mm

2) Precision of cutting cardboard:+-1mm

3) Length of cutting cardboard:500-9999mm.

4) Computer system to keep order.man-machine conversation system NC. Automatic adjust cutting speed by cardboard specification and maching.The screen display various production message .Can consult, modification, superaddition and cancel order during running machine.

5)High quality servo motor, the servo drive system import from Germany.

6)Transmission system adopts oil pump auto-Cye lubricate.

7)Exact and adjustable no gap gear assure knife-edge joggle exactly. incision quality good, beeline degree high, protect knives.

8)Single face conveyor machine:

Max, stacking height 2000mm,

Max stacking length 1800mm.

Design speed:100m/min.

9)Conveyor system after the slitter and cutter is applied to delivery the board on two direction, for rise efficiency and easy stacking.

10) It will be more suitable for large or moderate manufactories of offset printing box.

11) Can save more than 200 groups order, can change cutting size exactly in short time without stop, can connect to computer system, this makes the production management good.

12) Roll for leading paperboard has anti-skid material cover, more wear-resisting, size is correct.

13) Servo control motor drive, 5.7 inch Colorful touch screen, you can check every item clearly.

1. Automatic feed glue

2. Footstep clutch amass feed paper,

3. Bottom roller have washing function, easy wash

This machine automatic gluing, pedal on-off concentrated feeder, the bottom shaft with brush water cleaning function, to ensure the bottom roller clean, reduce the labor intensity, is small and medium-sized enterprise ideal products.

Semi-Auto Gluer Machine (Combined pressure model) is the latest product according to the users requirement, who has small order.

Ordinary carton and heterogeneous shape can be glued, hooked carton and the world edges paste covered carton also can be glued when be installed the Automatic glue device.

Maxium mechanical speed is 56m/min, efficiency is 4 times higher than manual operation.

1.Equipped with four arms, support two sets of mill roll paper, non-stopping in changing the roll paper.

2.Hydraulic drive to lifting & lowering, clapping and correcting.

3.The paper tension is controlled by pneumatic disk brake and multi-points pneumatic brake.

4.Adopt expandable chuck to improve efficiency.

4.Maximum load-weight: 3T

1, Reel Stand driven by hydraulic

2, Kraft paper range

Width: Max:1900mm Min:900mm

Diameter: Max: 1400mm Min: 350mm

3, Max load-bearing: 4000kg (One side)

4, Main roller dia.: 219mm

5, Pneumatic Source Pressure(Mpa): 0.4---0.8Mpa

6, Power: 380V 50Hz

Spec of hydraulic system:

1, Working Pressure(Mpa):16---18Mpa

2, Hydraulic Cylinder Range(Lift/Down): 100440mm

3, Hydraulic Cylinder Range(Clamp/Loosen): 63700mm

4, Hydraulic Station Motor Power: 4KW Short Time(S2) Working Type Nominal voltage:380V 50Hz

5, Hydraulic Station Electromagnetic Valve Working Power: 220V 50 Hz

1. Rotary-cutting slotting machine is my factory pressure in the circle round and slotting machine based on the use of their respective advantages of developing superior products, soft cut by the end of shaft (about auto-shifting), and imports cutting knife pad (circular pressure the use of the talents of round plastic) carton at home and abroad is a new type of mechanical products.
2. This is the cardboard boxes in the main production processes can be cardboard pressure, grooving Cutaway, drilling, a one-time die-forming hand-clasping (special-shaped cardboard boxes, cartons exception).
3. Aircraft imported gifted of the blade arc (Yuen Yuen pressure used serrated blade) imports cutting knife pad (Yuen Yuen pressure to use the talents of plastic), which
4. Its characteristics are: the work of cutting knife around the bottom axis automatic shift, rotating cutting automatic transposition, the incision Daogen not repeat and improve knife pad life.
5. Aircraft mainly improved product quality, with palpable box machine, a round circle pressure comparable to the production of cardboard boxes, but to save higher plate fees, and more improved safety factor.
6 . Aircraft used spray lubrication of the transmission gear all play a role lubrication.
7 . The cutting slotting machine and the original use of slotting machine as simple.

8. Rubber roller with knives roller gap adjust by manual. The rubber roller lift and down by pneumatic . Rubber adopt roller can shift move 40mm left and right.

9. Die cut adjust use the electrical phase adjust

10. The speed : max speed 60pcs /max , work speed : 40-50pcs/min

after processing the cardboard knife smooth, achieving Cutaway, grooving No Burr, burr.

We are offering our clients a wide range of highly efficientSheet Pasting Machine. These machines are used to apply glue on the tip of the corrugation sheets for making a different ply. Sheet Pasting Machine comprises 3 rollers, which are smoothly finished for ensuring even lamination of boards. We have provided hard chrome rollers with these machines for improving the quality, long life service of the machine and to ensure the gum crushing. Our range is available at the industry leading prices in the market.

The cast iron frame has been reinforced for extra strength. It's sturdy.design eliminates all risks of vibration & excessive strain.

The smooth cutting cycle is fast & accurate, even when you're cutting hard material or high stock. Moreover, the knife drive & clamp are dimensioned for heavy duty. Since the drive mechanism runs in an oil bath, lubrication is limited to a single oil change per year, thus reducing maintenance cost.

The fast cutting stroke is very accurate, to the knife carrier guides. All sliding surfaces have been precisely ground, guarantee of dependable precision & long service life.

High pressure . Hydraulics are used for precise, automatic clamping. The clamp starts gently & sets dawn softly on the stock. After contact has been established, the clamping pressure is increased automatically to the preset value, avoiding any distortion of the stock.

. And low pressure, when the clamp is used to help align the stack, it is operated by a foot pedal & clamping pressure adjusted to 40 Kg. approximately to protect the operator.

The back gauge which moves smoothly is guided precisely on a coloumn & side plates length up to knife carrier ensures a right angle cut even at the smaller length of the stock. The hand wheel mechanism provides comfort to the operator for the fine edjustments of the cutting marks, when working in manual mode of programe.

Simple & safe knife change, knife guides provided with the machine, helps removing of the knife easily avoiding any danger to the operator & provision of hand switch locks the mains motor running while process is carried out, avoiding any chances of accidents.

1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.

2) Effective working width: 1400, 1600, 1800, 2000

3) Max. raw paper dia: 1600mm

4) Min. raw paper size: 400mm900mm

5) Max. load of single arm: 1500kg.

6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.

7) Use disk model brake, have handle and electrical models. (can choose.)

8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)

9) Electrical elements are centralized controlled, this highly improves the production efficiency.

Technological parameters:

1. Paper roll frame working model: Mechanical electrical operation.

2. Paper roll length scope: Max.: 1600mm Min.:900mm

3. Paper roll diameter scope: Max.: 1400mm Min.:400mm

4. Single side max. load: 1500kg.

5. Motor power: (all are planet cycloid motor)

1)Clip motor: 0.75KW 4units 380V 50HZ

2) Up and down motor: 2.2KW 1unit 380V 50HZ

Paper roll up-dolly and rail

1) On the dolly have direction-leading wheel, can send the paper roll

2) Each roll stand has two paper roll sending rails, two paper roll up doll stably. y, it can load the paper roll in two sides at the same time.

Simultaneously Cutting and Creasing of the corrugated sheet is done over this machine. Two pairs of shafts have creasing and cutting heads mounted on them which are adjustable.

The sheets are piled on the feed table and fed through the machine by hand.Two side gauges are provided for correct feeding of sheet.The speed is 300' per minute and minimum distance between two dies is 3".

The best machine for slitting & scoring of corrugated sheets.The four pairs are used for slitting & four pairs are used for scoring.The set of four pairs for slitting can be removed easily similarly the set of four pairs of scoring can be removed easily.Hence the machine can also be used either for slitting only or for scoring only.

Flat cylinder hot stamping machine can stamp on both plane and cylinder article. As paper, card, folder, purse, pencil, bottle cap, ball pen, for gilding and emboss on small round product.

The bookexercise Notebook is hydraulically pressed by pressure plates to clamp the bookexercise Notebook, spine is pressed by hydraulic pressure (adjustable to suit paper used) which is controlled by PLC (Programmable Logic Control) that can be set to desired results.The machine in Automation mode operate automatically, (a) first press the notebooks then the rollers flatten the edge, (b) the first press get released slightly and again presses the notebooks and the rollers again flatten the edge. This completes One Cycle. It hardly takes a few seconds.

SIKHANDAR case maker SM 85 is automation to the conventional manual case making process. SM 85 ensures high productivity, superior & uniform case quality throughout the job run. SM 85 is designed and developed with special concern on consistent quality, simple operation, large variety of jobs, ease of maintenance & most suitable size for binding. SM 85 has automatic board gauge up-down system to keep operator handsfree. It has amazingly short new job setup time of less than 5 minutes.

Our high speed drilling machine is a type of automatic paper drilling machine used to punch holes in the edge of the pages. It has four drill bits which are driven by a high-speed rotary motor. The machine completes drilling operation by automatic movement of work bedplate. It has become the ideal equipment of drilling and binding for all kinds of binderies and gifts companies.