The FRLS (Flame Retardant Low Smoke Cables) House Wires bunched conductors are insulated with specially formulated flame retardant low smoke compound. During fire situation FRLS compound restricts the spread of flame, the emission of smoke is also less as compared to ordinary PVC cables.

Features:-

• Bunched conductor is shielded with specially devised FRLS compound
• Restricts the spreading of flames
• Emission of smoke is lesser in comparison to PVC cables
• Available in various capacities & lengths
• Lower heating
• Power saving
• Has high thermal stability
• Easy to wind & installation

The shield acts as a Faraday cage to reduce electrical noise from affecting the signals, and to reduce electromagnetic radiation that may interfere with other devices (see electromagnetic interference).

The shield minimizes capacitive coupled noise from other electrical sources. The shield must be applied across cable splices. In shielded signal cables the shield may act as the return path for the signal, or may act as screening only.

Description:-The annealed tinned/bare Electrolytic high conductivity copper multi strand flexible conductor as per IS: 8130/1984 of class-5, PVC insulated as per IS: 5831/1984, cores twisted together, Melinex taped. Shielded with aluminium mylar taped and screened with tinned copper braiding, taped again & overall PVC sheathed as per BS 5308 Part-2 multi core instrumentation Shielded Flexible cable

In the cables, varied EMFs are generated with different metal pairs that are further proportional to hot junction and the point where it is measured. All these cables are available in different color codes or cores and sheathing as per the international standards.

Description:-Extension leads of different metals but having similar EMF output between 0c to 100c connected between Thermocouple metals junction and the measuring instruments are called compensating cables which are generally recommended as solid conductor leads.

Application:-Different metal pairs generate different EMFs which is proportionate to the hot junction and the point where it is measured. Common combination of thermocouple metals.

Available Range:-

• K-Chromel/AIumel-Most commonly used.
• T-Copper /Constantan- for low temperature & cryogenic applications.
• J-Iron/ Constantan-Used in reducing atmosphere
• E -Chromel/ Constantan-Highest EMF output.
• R-(Platinum-13% Rhodium)/ Platinum & S-(Platinum-10% Rhodium) / Platinum-very High temperature measurements.
• B- (Platinum-30% Rhodium)/ Platinum mainly used in glass industry.
• Different color codes of cores and sheathing as per international practices are used to denote the various thermocouple cables.

The shield acts as a Faraday cage to reduce electrical noise from affecting the signals, and to reduce electromagnetic radiation that may interfere with other devices (see electromagnetic interference).

The shield minimizes capacitive coupled noise from other electrical sources. The shield must be applied across cable splices. In shielded signal cables the shield may act as the return path for the signal, or may act as screening only.

Description:-The annealed tinned/bare Electrolytic high conductivity copper multi strand flexible conductor as per IS: 8130/1984 of class-5, PVC insulated as per IS: 5831/1984, cores twisted together, Melinex taped. Shielded with aluminium mylar taped and screened with tinned copper braiding, taped again & overall PVC sheathed as per BS 5308 Part-2 multi core instrumentation Shielded Flexible cable

With ability to retain excellent di- electric properties when burnt, these braided cables are flame retardant and self-extinguishing. In addition to this, these cables are also resistant to fungus, UV radiations, corona discharge, acids and manganese. These cables are made with tinned copper stranded wires that are wounded twice and overlapped with polyester films braided with fiberglass.

Description:-

• 1.1 KV Grade, Multistrand Annealed Tinned Copper (ATC) Conductor As per IS: 8130/1984 class-V, Melinex Taped, Silicon Rubber Insulated type (IE-5) As per IS: 6380/1984 & overall Fiber glass Braided with silicon varnished Rubber Flexible Cable for200CAsperIS:9968/Pt-l/1988
• Tinned Copper stranded wires twice wounded opposite and well overlapped with polyester films braided with fibreglass yarn and impregnated with high class insulating thermosetting varnish flexible up to temperature from 70"C to 200C. Resists moisture chemicals, flames fungus radiation, corona discharged and acids ozone attack and even manages to retain excellent de electric properties when burnt

Application:-Typical industrial applications include food processing packaging, refrigeration furnaces and lighting

Fibre glass cables is used extensively as motors, transformers, lead wire and at places where conventional PVC wire is not suitable.

Available Range:-

• 1.5 sq.mm to 300 sq.mm (Single & Multi Core)
• 0.5 sq.mm to 630 sq.mm. (Single & Multicore

The cables do not heat up and are also chiefly demanded in reactor & process control, navy sector, high temperature control value furnace & oven.

These are also preferred at several areas where conventional PVC wire is not appropriate. The cable resists flames fungus radiation, chemical moisture, corona discharged, and acids ozone attack and even manages to retain excellent de electric properties when burnt.

It is also suited for fixed installation and other variable uses such as manufacturing lines, machine tools, conveyor systems and robotic assembly lines. The galvanized steel braid protects against mechanical stress and simultaneous against electrical interference. In this, XLPE, which is cross-linked polyethylene, is used as the main insulation material.

It withstands higher temperatures than ordinary thermoplastic polyethylene. It offers resistant against deformation and various chemicals.

All these cables are designed and made in confirmation with the international standards and norms, ensuring high level of safety to the industrial machines and home appliances. Different color codes are used on these cables in accordance with the international standards for safe usage. Excellent quality copper conductor and PVC insulation used in these cables make these wide in demand in every vertical of industry. These cables ensure complete protection to electronic appliances, equipment and machines from shock and fire.

We develop these cables with polyurethane sheath that is one of the best tear resistant materials available in industry. These are flame retardant, tear and abrasion resistant, water, oils and other chemical resistant. The cables are designed as to ensure longest and the safest operation in heavy duty conditions in mines and other heavy industries. These wires can be customized as per the suitability of our prestigious clients.

We offer our clients with Double Wire Armored Mining Cables that are developed from advanced technology and finest method of production. These are demanded in lifting platforms, marble industry, trucks, cranes, conveyors and pendant applications. These cables are available in standard as well as in customized sizes, are durable and easy to solder. The wire can bear extreme weather, such as immense heat and cold with ease.

Features:-

• Corrosion resistant
• Easier to solder
• High performance
• Comes with longer service life
• Standard & customized engineered cable
• Can bear extreme heat & cold
• Unaffected by oil, chemical & water
• Abrasion resistant
• With added strength

Applications:-

• Pendant function
• Robotic welding
• Conveyors
• Cranes
• Construction machinery
• Trucks
• Machinery industry
• Marble industry
• Lifting platforms

In this, annealed tinned electrolytic high conductivity copper solid conductor, foam insulated and cores are twisted together in a form of pair, melinex taped, shielded with aluminum mylar and screen with tinned copper. It is installed in cable tracks, outdoor installation and direct burial. It has a double shielding that makes this cable suitable for even in EMC demanding areas.

The Telephone Armored Cables are made from solid plant copper conductor, color coded polyethylene bedding, galvanized steel wire armour and black or grey polyethylene or external grade PVC sheath. Our wires are made under the supervision of qualified professionals and go through stringent quality checks.

These are widely used for external connection of telephone systems and other communications equipments where the added protection of steel wire armoring is needed. It is also installed for primary and secondary underground (direct buried) distribution networks.

Description:-Telecommunication ARMOURED Cable, Annealed Tinned Electrolytic Copper Conductor PVC Insulated and PVC Sheathed, Twisted Pairs with Standard together in Concentric Layers to minimize Cross Talk and wrapped with Melinex/PVC tape, ARMOURED with G.I. Wire/Strip as Taped, PVC Sheathed with a Nylon Rip Cord confirming to 'TEC specification No. G/W1R/-06/02 MAY94

These wires are suitable for both internal as well as panoramic elevators. The lift cables come with suspended length of up to 45 meters. We make use of contemporary equipment while manufacturing these cables.

Description:-1100 v grade multistrand Annealed bare copper conductor, extra flexible PVC insulated and sheathed flat cable.

Available Range:-0.5 sq.mm to 2.5 sq.mm up to 16 core.

Description:-MITUSHI make 1100 volt. Grade multistrand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.

Available Range:-MITUSHI make 1100 volt. Grade multistrand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.

• 1.5sqmm & 2.5sqmm upto 24 core
• 4sqmm to 95sqmm upto 4 core

Application:-Elevator/Flat form cable is a flat traveling PVC cable used in conveyor and hoist equipment. This cable is suitable for internal and panoramic elevator application with a freely suspended length up to 45 meters.

The FRLS (Flame Retardant Low Smoke Cables) House Wires bunched conductors are insulated with specially formulated flame retardant low smoke compound. During fire situation FRLS compound restricts the spread of flame, the emission of smoke is also less as compared to ordinary PVC cables.

Features:-

• Bunched conductor is shielded with specially devised FRLS compound
• Restricts the spreading of flames
• Emission of smoke is lesser in comparison to PVC cables
• Available in various capacities & lengths
• Lower heating
• Power saving
• Has high thermal stability
• Easy to wind & installation

The shield acts as a Faraday cage to reduce electrical noise from affecting the signals, and to reduce electromagnetic radiation that may interfere with other devices (see electromagnetic interference).

The shield minimizes capacitive coupled noise from other electrical sources. The shield must be applied across cable splices. In shielded signal cables the shield may act as the return path for the signal, or may act as screening only.

Description:-The annealed tinned/bare Electrolytic high conductivity copper multi strand flexible conductor as per IS: 8130/1984 of class-5, PVC insulated as per IS: 5831/1984, cores twisted together, Melinex taped. Shielded with aluminium mylar taped and screened with tinned copper braiding, taped again & overall PVC sheathed as per BS 5308 Part-2 multi core instrumentation Shielded Flexible cable

In the cables, varied EMFs are generated with different metal pairs that are further proportional to hot junction and the point where it is measured. All these cables are available in different color codes or cores and sheathing as per the international standards.

Description:-Extension leads of different metals but having similar EMF output between 0c to 100c connected between Thermocouple metals junction and the measuring instruments are called compensating cables which are generally recommended as solid conductor leads.

Application:-Different metal pairs generate different EMFs which is proportionate to the hot junction and the point where it is measured. Common combination of thermocouple metals.

Available Range:-

• K-Chromel/AIumel-Most commonly used.
• T-Copper /Constantan- for low temperature & cryogenic applications.
• J-Iron/ Constantan-Used in reducing atmosphere
• E -Chromel/ Constantan-Highest EMF output.
• R-(Platinum-13% Rhodium)/ Platinum & S-(Platinum-10% Rhodium) / Platinum-very High temperature measurements.
• B- (Platinum-30% Rhodium)/ Platinum mainly used in glass industry.
• Different color codes of cores and sheathing as per international practices are used to denote the various thermocouple cables.

The shield acts as a Faraday cage to reduce electrical noise from affecting the signals, and to reduce electromagnetic radiation that may interfere with other devices (see electromagnetic interference).

The shield minimizes capacitive coupled noise from other electrical sources. The shield must be applied across cable splices. In shielded signal cables the shield may act as the return path for the signal, or may act as screening only.

Description:-The annealed tinned/bare Electrolytic high conductivity copper multi strand flexible conductor as per IS: 8130/1984 of class-5, PVC insulated as per IS: 5831/1984, cores twisted together, Melinex taped. Shielded with aluminium mylar taped and screened with tinned copper braiding, taped again & overall PVC sheathed as per BS 5308 Part-2 multi core instrumentation Shielded Flexible cable

With ability to retain excellent di- electric properties when burnt, these braided cables are flame retardant and self-extinguishing. In addition to this, these cables are also resistant to fungus, UV radiations, corona discharge, acids and manganese. These cables are made with tinned copper stranded wires that are wounded twice and overlapped with polyester films braided with fiberglass.

Description:-

• 1.1 KV Grade, Multistrand Annealed Tinned Copper (ATC) Conductor As per IS: 8130/1984 class-V, Melinex Taped, Silicon Rubber Insulated type (IE-5) As per IS: 6380/1984 & overall Fiber glass Braided with silicon varnished Rubber Flexible Cable for200CAsperIS:9968/Pt-l/1988
• Tinned Copper stranded wires twice wounded opposite and well overlapped with polyester films braided with fibreglass yarn and impregnated with high class insulating thermosetting varnish flexible up to temperature from 70"C to 200C. Resists moisture chemicals, flames fungus radiation, corona discharged and acids ozone attack and even manages to retain excellent de electric properties when burnt

Application:-Typical industrial applications include food processing packaging, refrigeration furnaces and lighting

Fibre glass cables is used extensively as motors, transformers, lead wire and at places where conventional PVC wire is not suitable.

Available Range:-

• 1.5 sq.mm to 300 sq.mm (Single & Multi Core)
• 0.5 sq.mm to 630 sq.mm. (Single & Multicore

The cables do not heat up and are also chiefly demanded in reactor & process control, navy sector, high temperature control value furnace & oven.

These are also preferred at several areas where conventional PVC wire is not appropriate. The cable resists flames fungus radiation, chemical moisture, corona discharged, and acids ozone attack and even manages to retain excellent de electric properties when burnt.

It is also suited for fixed installation and other variable uses such as manufacturing lines, machine tools, conveyor systems and robotic assembly lines. The galvanized steel braid protects against mechanical stress and simultaneous against electrical interference. In this, XLPE, which is cross-linked polyethylene, is used as the main insulation material.

It withstands higher temperatures than ordinary thermoplastic polyethylene. It offers resistant against deformation and various chemicals.

All these cables are designed and made in confirmation with the international standards and norms, ensuring high level of safety to the industrial machines and home appliances. Different color codes are used on these cables in accordance with the international standards for safe usage. Excellent quality copper conductor and PVC insulation used in these cables make these wide in demand in every vertical of industry. These cables ensure complete protection to electronic appliances, equipment and machines from shock and fire.

We develop these cables with polyurethane sheath that is one of the best tear resistant materials available in industry. These are flame retardant, tear and abrasion resistant, water, oils and other chemical resistant. The cables are designed as to ensure longest and the safest operation in heavy duty conditions in mines and other heavy industries. These wires can be customized as per the suitability of our prestigious clients.

We offer our clients with Double Wire Armored Mining Cables that are developed from advanced technology and finest method of production. These are demanded in lifting platforms, marble industry, trucks, cranes, conveyors and pendant applications. These cables are available in standard as well as in customized sizes, are durable and easy to solder. The wire can bear extreme weather, such as immense heat and cold with ease.

Features:-

• Corrosion resistant
• Easier to solder
• High performance
• Comes with longer service life
• Standard & customized engineered cable
• Can bear extreme heat & cold
• Unaffected by oil, chemical & water
• Abrasion resistant
• With added strength

Applications:-

• Pendant function
• Robotic welding
• Conveyors
• Cranes
• Construction machinery
• Trucks
• Machinery industry
• Marble industry
• Lifting platforms

In this, annealed tinned electrolytic high conductivity copper solid conductor, foam insulated and cores are twisted together in a form of pair, melinex taped, shielded with aluminum mylar and screen with tinned copper. It is installed in cable tracks, outdoor installation and direct burial. It has a double shielding that makes this cable suitable for even in EMC demanding areas.

The Telephone Armored Cables are made from solid plant copper conductor, color coded polyethylene bedding, galvanized steel wire armour and black or grey polyethylene or external grade PVC sheath. Our wires are made under the supervision of qualified professionals and go through stringent quality checks.

These are widely used for external connection of telephone systems and other communications equipments where the added protection of steel wire armoring is needed. It is also installed for primary and secondary underground (direct buried) distribution networks.

Description:-Telecommunication ARMOURED Cable, Annealed Tinned Electrolytic Copper Conductor PVC Insulated and PVC Sheathed, Twisted Pairs with Standard together in Concentric Layers to minimize Cross Talk and wrapped with Melinex/PVC tape, ARMOURED with G.I. Wire/Strip as Taped, PVC Sheathed with a Nylon Rip Cord confirming to 'TEC specification No. G/W1R/-06/02 MAY94

These wires are suitable for both internal as well as panoramic elevators. The lift cables come with suspended length of up to 45 meters. We make use of contemporary equipment while manufacturing these cables.

Description:-1100 v grade multistrand Annealed bare copper conductor, extra flexible PVC insulated and sheathed flat cable.

Available Range:-0.5 sq.mm to 2.5 sq.mm up to 16 core.

Description:-MITUSHI make 1100 volt. Grade multistrand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.

Available Range:-MITUSHI make 1100 volt. Grade multistrand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.

• 1.5sqmm & 2.5sqmm upto 24 core
• 4sqmm to 95sqmm upto 4 core

Application:-Elevator/Flat form cable is a flat traveling PVC cable used in conveyor and hoist equipment. This cable is suitable for internal and panoramic elevator application with a freely suspended length up to 45 meters.