Siddhi Vinayak Engineers

Gidc, Vapi, Gujarat

Reference :IS:904/ BS:5041
MOC :(a) Gunmetal (Copper Alloy) IS:318 LTB-2 (Against Specific Requirement can be supplied in Aluminium Alloy (Light Alloy) or Stainless Steel MOC)
Inlet :63 mm Male Instantaneous Inlet with NRV (Non Return Valve) MOC Gunmetal/ Copper Alloy/ Stainless Steel available for NRV
Dust Cap :Rubber (Optionally Metallic cap also available)
Outlet :Round Threaded Type / BSRT 4OR 5 (Please mention Standard/ Drilling dimensions required in Enquiry/Order)
Leakage Test :Body 21 Kgf/cm2 (If Test Requirement is more can be designed/supplied accordingly also)

• Foam Branch (Low Expansion Type)
• Foam Branch (Medium Expansion)
• Water Driven Foam Generator (High Expansion)
• Inline Inductor
• Foam Generator (Low Expansion
• MOBILE FOAM UNIT

SKF offers a wide range of standard and customised coupling products. SKF Couplings cover a wide range of coupling types, sizes and capacity ratings for many applications and factory environments.

CG offers Kibosh Brake Motors, the most reliable range with highly competitive delivery time. Kibosh Brake Motors is designed to serve various braking applications like crane, hoists, rolling mills, wind mills, elevators etc.

A well-designed chain drive transmits mechanical power from one shaft to another efficiently. SKF Chains are manufactured in state of the art facilities, using tight quality controls. All products conform to ISO standards and other industrial standards such as ANSI, BS, DIN and JIS.

Type :Double Female (Both Side Female Instantaneous type)
MOC :Copper Alloy (Gunmetal)/Alu. Alloy(Light Alloy)/Stainless Steel
Size :2 Female Instantaneous x 2 Female Instantaneous (IS:901)
Option :Optional accessories like PVC/ Metal Blank cap & Chain
Finish :Polished/Painted, Alu. Alloy- Anodized /Powder coated

Type :Dividing Breeching with Control Valve
MOC :Copper Alloy (Gunmetal)
Size :1 Nos. 2 Male Inst. Inlet x 2 Nos. 2 Female Inst. Outlet
Finish :Polished/Painted
Option :Also Available with Valve for Individual Outlet Control

An Bearing housing, together with appropriate bearings constitute economic, interchangeable bearing units that meet the demand for designs that are easy to maintain.

NBC has produced Axle Boxes for the railways since 1952. The company meets the complete requirements of the Indian Railways (one of the largest in the world) by designing and developing Axle Boxes and bearings for fitment to locomotives manufactured by Diesel Locomotive Works, Chittaranjan Locomotive Works, various other wagon builders, ICF broad and meter gauge coaches.

NBC has partnered with ConMet of USA to manufacture Pre-Set Hub assemblies for Heavy commercial vehicle applications. Preset hubs utilize pre-adjusted bearings to facilitate proper installation, extend seal and bearing life and ease maintenance. Almost 90% of the heavy trucks in North America use the preset hub technology. A preset hub is a pre-adjusted but serviceable assembly.

Deep groove ball bearings are particularly versatile. They are simple in design, non-separable, suitable for high and very high speeds and are robust in operation, requiring little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF in many designs, variants and sizes.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

Tapered roller bearings have tapered inner and outer ring raceways and tapered rollers. They are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle . The size of the angle is related to the calculation factor e ( product tables): the larger the value of e, the larger the contact angle. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing.

SKF cylindrical roller bearings are available in many designs, series and sizes. The majority are single row bearings with a cage. High-capacity bearings, double row bearings, multi-row bearings, single, double and multi-row full complement bearings (without a cage) and split bearings complete the SKF standard assortment provided here.

SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The ends of the rollers are relieved slightly to modify the line contact between the rollers and raceways. This prevents stress peaks at the roller ends to extend bearing service life.

SKF ball or roller thrust bearings are fitted with a form-stable cage to reliably retain and guide a large number of ball or rollers. The very small diameter deviation of the ball or roller within one assembly enables these bearings to accommodate heavy axial loads and shock loads.

Seals have a crucial impact on system performance. Life and reliability of what is often considered a simple component can make all the difference to your products and operations. SKF has more than 100 years of experience in various industries and applications, and is the only company that can support key aspects of the sealing system through its knowledge of bearings, seals, lubrication and associated science and technology.

SKF lubrication solutions range from specialized lubricants to state-of-the-art lubrication systems. Integrated SKF lubrication solutions combine our expertise in bearings, seals and condition monitoring with our tribology knowledge the study of friction, wear and lubrication.

As a complement to our bearings SKF supplies a wide assortment of bearing accessories like adapter sleeves, withdrawal sleeves and lock nuts.

Adapter and withdrawal sleeves are used to locate bearings with tapered bore on plain or stepped shafts. They facilitate bearing mounting and dismounting and, in many cases, simplify bearing arrangement design.

A well-designed belt drive will transmit power for many years with minimal maintenance. As such, investing in high quality belts reduces the total cost of ownership of your machinery in the long-run.

Belt performance is highly dependent on pulley performance. High quality pulleys can significantly increase belt life and reduce the total cost of ownership of your machinery.

SKF Sprockets come in a wide range of sizes. With a comprehensive selection available, you will never have to worry about finding the perfect sprocket size for your application.

SKF Bushings and hubs are made of high quality steel, with most phosphate coated or blackened for improved corrosion resistance. All SKF Bushings can be easily installed and removed with basic tools, which results in minimal downtime each time they are fitted.

Reduce the risk of damaging components and personal injury

SKF offers a wide range of bearing pullers for various types of pulls: External, internal and even blind. The range includes mechanical, hydraulic and hydraulically assisted pullers for easy application of high withdrawal forces

The comprehensive SKF induction heater range can be used for efficiently heating bearings and work pieces, both large and small.

Premature bearing failure can result from damage incurred when a bearing is incorrectly mounted.Typical problems that can cause premature failures are:1) Damage caused during the fitting procedure2) Incorrect sized shafts and housings i.e. too loose or too tight3) Retaining lock nuts coming loose in operation4) Incorrectly mounted bearings

SKF shaft and belt alignment tools allow customers to increase their machine reliability through easy-to-use and accurate alignment. The range of alignment tools is suitable for almost all applications and customers, from best value for money tools to tools for demanding alignment applications.

Detect hot spots before they cause troubleUsing an SKF Thermal Camera is a proactive way to help you detect problems before they occur, increasing uptime and improving safety. They allow you to be able to visualise potential problems, invisible to the naked eye, by presenting a picture of the heat distribution of an asset. The thermal image, presented on a large LCD screen, shows you where the temperature is either too hot or too cold allowing you to pinpoint potential problems fast.

The SKF TLSD series is the first choice when a simple and reliable automatic lubricator is required under variable temperatures, or when the application conditions (such as vibration, limited space or hazardous environments) require a remote mounting.

FeaturesPetra lift machine units of substantial construction combining rigidity and compactness in a single traction unit with monobloc gearbox casing that houses motor, brake, sheave pulley etc.

• IE 2 Induction Motors
• EFF 2 Induction Motors
• EFF 1 Induction Motors
• Slip Ring Induction Motors
• Crane Duty Motors
• Induction Motors For Texttile Applications

CG offers wide range of low voltage Flameproof Squirrel Cage & Slip Ring electric motors for operation in hazardous and hostile environments, ranging from 0.37 kW to 355 kW. These Flameproof Motors are licensed by a European notified body (BASEEFA) and Indian notified body (ERTL/DGMS/DGFAS&LI).All relevant products fully comply with the requirements of the ATEX & CE Directives.

CG offers a wide range of AC & DC generators (alternators), both brushless and slip ring type. Our single phase alternators are designed to meet the customer requirements in remote as well as urban areas for uninterrupted power supply.

CG is an established name synonymous with rotating machines. Our manufacturing unit located at Ahmednagar (Maharashra), India, manufactures DC motors up to 1500 kW.

An AC drive controls the application by continuously adjusting the motor speed. This results in reduced energy usage and prevents unnecessary wear of the equipment. CG offers a wide product range in the low voltage drives segment. Direct torque control and built-in shaft power monitoring are examples of premium features of AC drives.

High dynamics for demanding applications
Emotron VFX 2.0 AC drive optimizes the operation of your cranes, crushers, mills and mixers. Your process is protected from damage and downtime and you will benefit from reduced installation, energy and maintenance costs.

The Hydrant System comprises of AC motor driven pump sets with all required accessories including valves, instrumentation and controls etc. Complete in all respects. An automatic hydrant system is furnished covering the areas completely from independent.

Material :Gun Metal LTB - II & Stainless Steel
Size :63 mm, 52 mm, 38 mm dia
63 Female single outlet type - "A"
63 Female double outlet type-"B"
Performance Test :Hydraulic Test : 21 Kgf/cm2

MOC :Copper Alloy (Gunmetal) / Alu. Alloy (Light Alloy)/Stainless Steel
Inlet :63 mm size Male Instantaneous Inlet to Operate with Pressurized Water 100 mm Size Round Threaded (BSRT) Suction Inlet
Outlet :100 mm Size Round Threaded (BSRT)
Finish :Painted Fire Red/ PO Red with Male Instantaneous Inlet Polished

Reference :IS:903 /BS:336 or Relevant International Standard
MOC :Gunmetal (Copper Alloy) IS:318 LTB-2 (For All Above Models)
Alu. Alloy (Light Alloy) IS:617 (Model -330, 332, 333) Also available with MOC as per BS Standard requirements
Finish :Copper Alloy : Polished /Chrome plated Finish
Alu. Alloy/Light Alloy : Anodized / Powder Coated / Natural Finish Stainless Steel : Polished/ Powder Coated
Important :If Size required 38 mm , 50 mm, 70 mm can be supplied as per customer details For Suction/Screwed also can be supplied in 75 mm, 100 mm & 140 mm Size

Reference :IS:903 /BS:336 for Short Branch or IS Standard as mentioned below for Varieties
MOC :(a) Gunmetal (Copper Alloy) IS:318 LTB-2 ( All Models )
(b) Stainless Steel IS:3444 Gr-I /SS-304 or Gr-IV/SS 316 (For Model 312, 315, 316, 322, 323, 324 of below)
(c) Alu. Alloy (Light Alloy) IS:617 (For Model 312, 316, 317, 318, 321, 322, 324 of below)
Also available with MOC as per BS Standard requirements.
Finish :Copper Alloy : Polished /Chrome plated Finish Alu. Alloy/Light Alloy : Anodized / Powder Coated / Natural Finish Stainless Steel : Polished/ Powder Coated.

MOC :Stand Post (Welded) Pipe ERW/ Seamless Type Flanges : Mild Steel/Carbon Steel
Inlet :80 mm NB for Single Outlet/ 100 mm NB For Double Outlet
Outlet :80 mm NB (Please mention Standard/ Drilling dimensions required in Enquiry/Order)
Leakage Test :Body 15 Kgf/cm2 (Also Can be provided for Pressure test up to 18 Kgf/cm2)
Finish :Painted PO Red/ Fire Red

Reference :BS:750
MOC :Stand Pipe : a) Gunmetal (Copper Alloy) IS:318 LTB-2 with Copper/ GI Pipeb) Alu. Alloy (Light Alloy) IS:617 with Extruded Alu. Pipe
Inlet :63 mm Round Threaded (BSRT)/ Female Instantaneous
Outlet :Swivel Head, 63 mm Size Female Instantaneous
Leakage Test :Body 21 Kgf/cm2
Finish :Painted/ Powder Coated (Light Alloy and GI Parts)

Reference :IS:8442 With Latest Amendment
MOC :Mild Steel (Steel), Also can be supplied in S.S. or Copper Alloy against specific Requirement
Size :63 mm, 75 mm , 100 mm (Barrel Size)
Inlet:Flanged : (Drilling Dimensions as per IS/ANSI/DIN or other Standards) 3 (75 mm) NB, 4 (100 mm) NB, 6 (150 mm) NB (Please mention Standard/ Drilling dimensions required in Enquiry/Order)
Outlet :Threaded suitable to Jet Nozzle/ Jet-Spray Nozzle/Foam Barrel/Water-Foam Nozzle

Type :Male Instantaneous Blank cap with Chain (Knob Type)
MOC :Copper Alloy (Gunmetal)/Alu. Alloy (Light Alloy)
Size :2 Male Instantaneous
Finish :Polished/Painted, Alu. Alloy- Anodized /Powder coated

MOC :Gunmetal / Aluminum Alloy / Cast Iron
Inlet/Outlet :Gunmetal / Aluminum Alloy
Sizes :Inlet: 75mm (3") / 100mm (4") / 137mm (5") Round ThreadedOutlet: 63mm (2 1/2") with NRV - 3 Nos. - Male Instanteneous type
Test Pressure :21 kgf/cm

We have different designs as per customer requirement. Most popular our designs sets are:1) Wall Mounting 180 Deg Cen. Swinging type with 30 meter / 36 meter / 40 meter hose and Nozzle (PVC / Gun Metal / SS). Our Drum design specialty are, the drums can be dismantled, and assembled very easily, hence very easy and economical for transport and very convenient to install and maintain. This drum can also be installed on riser directly.2) Riser Wall Mounted 180 Deg Cen. Swinging type with 30 meter hose and Nozzle (PVC / Gun Metal / SS).