Features

• Patented Intelligent Flow Technology® – Reduce distance and water flow simultaneously and proportionately up to 50%. Water savings of up to 30%
• Patented easy arc set – Simplified setting wet or dry. Water flow cabe turned off or adjusted ithe popped-up position
• Adjustable or continuous rotatio– Provides a full range of adjustment from 40° to continuous 360°
• Patented arc set degree markings – Clearly indicates current watering pattern, simplifies arc set adjustment
• Arc memory clutch – Prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced out of adjustment
• Patented reversing mechanism – Assures continuous reverse and return
• Ratcheting riser – Allows for easy adjustment of your left starting positiowith a simple turof the riser
• Rubber cover – Seals out dirt and increases durability
• Optional check valve – Prevents low head drainage
• Rugged stainless steel spring – .093 gauge 302 stainless steel spring extends the life of the rotor

Models

• 10003 SuperPro
• 10003-HP SuperPro High Pop
• 10003-SH SuperPro Shrub

Easy Arc Setting

• Arc selectiofrom 40° to continuous 360°. Adjust from left start.
• Reduces distance and flow rate simultaneously and proportionately
• Provides full on/off control

2-Wire Decoder Controller

Features

• Number of stations: Up to 99
• Weather station capable
• Connect up to 2 hard-wired flow meters and 3 additional meters attached to decoders in the field
• Rain sensor and rain/freeze sensor ready
• 6 independent programs with 6 start times each
• Full on-screen keyboard makes naming and programming easy and intuitive
• Advanced diagnostics include interactive fault log, decoder signal strength/status
• Largest screen in the industry displays run times, watering days, number of start times
• Two fully independent wire paths for easy layout design and trouble shooting
• Special features include seasonal adjust, station/zone grouping, program backup and restore
• Station delay/overlap and pump pressurization allows dual operation and pressurization for each of 5 separate pump start locations
• Vandal-resistant lockable housing

Specifications

OPERATING SPECIFICATIONS

• Station Run Times: 1 second to 9:59:59 Programs A, B, C, D, E, & F
• Start Times: 6 per program
• Watering Schedule: 7 Day Calendar (any day of the week), odd/even days, interval watering up to 31 days
• Operating Temperature: 0°–140° F (18°–60° C)
• Zone Capacity: 99 zone groups limited to 6 zones and 1 MV/PS per primary line. Add up to 12 zones (A and B total).
• Pump Start Requirements: Pump Starts wired directly to the controller require a K-Rain 1520 or 1510 mini coil power relay. Remote pump start relays on the 2-wire path require a K-Rain 3410 Optical Pump Start Relay in conjunction with a K-Rain 1520 or 1510 mini coil power relay.

ELECTRICAL SPECIFICATIONS

• 2-Wire transformer; Input: 120/240 50/60 Hz Max Output: 27 VAC 100VA 3.7 AMP
• Midbox Transformer; Input: 120/240 50/60 Hz Max Output: 24 VAC 40VA 1.71 AMP
• Battery: 2032 Coin Cell (included) 9V alkaline battery (optional, not included)

Models

• 3400 110 VAC 2-wire decoder controller
• 3400-220 220 VAC 2-wire decoder controller
• 3420 110 VAC 2-wire decoder controller in stainless steel cabinet
• 3420-220 220 VAC 2-wire decoder controller in stainless steel cabinet
• 3421 110 VAC 2-wire decoder controller on stainless steel pedestal
• 3421-220 220 VAC 2-wire decoder controller on stainless steel pedestal

*Above models include 3403 2-wire module.

Bluetooth battery powered controller.

Features

• Ideal for areas where AC power is unavailable
• Change controller settings via smartphone, tablet or web browser
• Manage hundreds of controllers from one easy app
• Geo-location feature – see every site, every controller, every program
• CrewView™ feature allows program visibility anywhere
• Alerts you when a battery replacement is required
• Rain sensor and rain/freeze sensor ready – Allows automated operation to be controlled by sensor
• IP68 certified fully waterproof enclosure installs right in the valve box n 1, 2 and 4 station models.
• Molded out of UV resistant, high impact ABS resin
• Ideal for isolated/remote valve boxes where running power is expensive or difficult
• Standalone – works with 9V DC alkaline battery type.
• Full virtual back up – back up program information & preferences to the cloud for easy future restoration
• Seasonal adjust
• Manually start, stop or suspend your controller(s) from up to 35' away
• Add a passcode lock to each controller for added security

Specifications

OPERATING SPECIFICATIONS

• 1, 2 and 4 stations
• Master valve connection (Except for BLUE-1 single station)
• 6 programs, 8 start times
• Bluetooth range; 35' (10 m)

ELECTRICAL SPECIFICATIONS

• Works with 9V DC latching solenoids and a master valve equipped with a 9V DC latching solenoid
• Maximum distance between the timer and solenoid is 98' (30 m) with 18 AWG (.05" or 1, 55 mm2)

Models

• BLUE-1 1 Station
• BLUE-2 2 Station
• BLUE-4 4 Station

The 6000 line of indexing valves offers exceptional reliability and durability even under the dirtiest water conditions.

Features

• Metal Die-Cast Body – Durable, long lasting and capable of high pressure applications
• Available in 4 and 6 Outlet Models – Can quickly and easily change number of watering zones with a cam change
• Simplicity of Design – Valves are easily maintained & serviced for long product life
• Operates at 15 GPM at Pressures of 25–150 PSI – Ideal for pump-fed systems or high-flow city water systems
• Built-in Atmospheric Vacuum Breaker – Releases any vacuum created between the pump and the valve on shut down

Models

FOUR OUTLET MODELS

• 6402 Cammed for 2 Zone Operation
• 6403 Cammed for 3 Zone Operation
• 6404 Cammed for 4 Zone Operation

SIX OUTLET MODELS

• 6605 Cammed for 5 Zone Operation
• 6606 Cammed for 6 Zone Operation

Other options add to part number:

-RCW Reclaimed Water Use

Accessories*

• P8003050 Stem/disk Assembly Standard Heavy (.032-Red) 15 GPM** (57 LPM)
• P8003051 Stem/disk Assembly Light (.028-White) 10 GPM (38 LPM)
• P8003052 Stem/disk Assembly Extra Light (.025-Blue) 6 GPM (23 LPM)

Four built-in selectable nozzles – Fastest nozzle change of any rotor. Never have to remove a nozzle.

Adjustable arc (40°-360°) – all adjustments made from the top – wet or dry, no special tools needed

Matched precipitation rates – when nozzle setting matched to arc

Precision-engineered nozzles – for water-saving efficiency

Top arc set and degree indications – Allows for wet or dry adjustment in seconds.

Precision engineered nozzles – ensures water-saving efficiency.

Low-pressure operatio

The rain-tight, secure, rustproof enclosure provides a safe, secure housing built to last.

Features

The Pump Start Relay enclosure is constructed with a corrosion resistant, UV resistant, shockproof material

Nozzle Racks

P52775

MiniPro® and RPS 50 Nozzle Rack (red)

P51399

• ProPlus® Nozzle Rack (red)
• Standard: 0.5, 0.75, 1, 2, 3, 4, 6, 8 GPM
• Low Angle: 1, 3, 4, 6 GPM
• Pre-installed Nozzle: 2.5 GPM

P16001101

• RPS™ 75 Nozzle Rack (red)
• Standard: 0.75, 1, 1.5, 2, 4, 6, 8 GPM
• Low Angle: 1, 3, 4, 6 GPM
• Pre-installed Nozzle: 3.0 GPM

P16001102

ProPlus-RCW low angle nozzle rack

P16001110 

• RPS™ 75i, SuperPro Nozzle Rack (green)
• Standard: 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8 GPM
• Low Angle: 1, 1.5, 2, 3 GPM
• Pre-installed Nozzle: 2.5 GPM

Turn your irrigation controller into an expert water manager.

Features

UNIVERSAL RAIN SENSOR RECEIVER

• Flexibility. Allows a K-Rain Wireless Rain/Freeze Sensor to be paired with any manufacturer’s rain sensor terminal equipped controller
• Simplicity. Provides the advantage of extremely quick, easy installation and programming, along with simple pairing with a K-Rain Rain Sensor
• Weather Resistant. Engineered with impact modified, UV resistant polymer for outdoor exposure
• Maintenance Free. No batteries to replace

RAIN/FREEZE SENSORS 

• K-Rain Rain Sensor products efficiently suspend watering during rain and/or freeze periods.
• The K-Rain wireless rain-freeze sensor can be paired with multiple K-Rain PRO EX 2.0 Wifi enabled controllers within range, providing an additional value for the end user. The wired rain sensors work with closed circuit timers.
• 2 in 1 Mounting. Provides flexible installation with standard flat & gutter mounting
• Models 3208-WRFS and 3208-HRFS include a freeze sensor that prevents the irrigation system from starting when temperatures drop to 37°F or below

Models

• 3208-HRS Hardwired Rain Sensor
• 3208-HRFS Hardwired Rain-Freeze Sensor
• 3208-WRFS Wireless Rain/Freeze Sensor for PRO EX 2.0 or PRO EX 2.0 WiFi with RF Module installed
• 3208-WRFS-KIT Wireless Rain/Freeze Sensor and RF Module for PRO EX 2.0
• 3208-UWRFS Universal Wireless Rain/Freeze Sensor

Features

• Install Above or Below Grade 
• Pressure-compensating Emitters – Ensure uniform output across the entire length of run
• In-line Emitter Check Valves – Prevents drainage from the dripline when water pressure drops below 2.5 PSI, protecting against the siphoning of small sediment and soil particles into the drip emitter – ideal for sub-surface installation
• Available in Two Flow Rates and 2 spacing sizes – Provides maximum design flexibility in a variety of applications
• Drip Control Zone Kit – Pre-assembled for quick installation, heavy duty, corrosion resistant, 150 mesh stainless steel filter

Content

WiFi hub, RF module with small antenna, large antenna with coax cable.

Features

• Patented Intelligent Flow Technology® – Reduce distance and water flow simultaneously and proportionately up to 50%. Water savings of up to 30%
• Patented easy arc set – Simplified setting wet or dry. Water flow cabe turned off or adjusted ithe popped-up position
• Adjustable or continuous rotatio– Provides a full range of adjustment from 40° to continuous 360°
• Patented arc set degree markings – Clearly indicates current watering pattern, simplifies arc set adjustment
• Arc memory clutch – Prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced out of adjustment
• Patented reversing mechanism – Assures continuous reverse and return
• Ratcheting riser – Allows for easy adjustment of your left starting positiowith a simple turof the riser
• Rubber cover – Seals out dirt and increases durability
• Optional check valve – Prevents low head drainage
• Rugged stainless steel spring – .093 gauge 302 stainless steel spring extends the life of the rotor

Models

• 10003 SuperPro
• 10003-HP SuperPro High Pop
• 10003-SH SuperPro Shrub

Easy Arc Setting

• Arc selectiofrom 40° to continuous 360°. Adjust from left start.
• Reduces distance and flow rate simultaneously and proportionately
• Provides full on/off control

2-Wire Decoder Controller

Features

• Number of stations: Up to 99
• Weather station capable
• Connect up to 2 hard-wired flow meters and 3 additional meters attached to decoders in the field
• Rain sensor and rain/freeze sensor ready
• 6 independent programs with 6 start times each
• Full on-screen keyboard makes naming and programming easy and intuitive
• Advanced diagnostics include interactive fault log, decoder signal strength/status
• Largest screen in the industry displays run times, watering days, number of start times
• Two fully independent wire paths for easy layout design and trouble shooting
• Special features include seasonal adjust, station/zone grouping, program backup and restore
• Station delay/overlap and pump pressurization allows dual operation and pressurization for each of 5 separate pump start locations
• Vandal-resistant lockable housing

Specifications

OPERATING SPECIFICATIONS

• Station Run Times: 1 second to 9:59:59 Programs A, B, C, D, E, & F
• Start Times: 6 per program
• Watering Schedule: 7 Day Calendar (any day of the week), odd/even days, interval watering up to 31 days
• Operating Temperature: 0°–140° F (18°–60° C)
• Zone Capacity: 99 zone groups limited to 6 zones and 1 MV/PS per primary line. Add up to 12 zones (A and B total).
• Pump Start Requirements: Pump Starts wired directly to the controller require a K-Rain 1520 or 1510 mini coil power relay. Remote pump start relays on the 2-wire path require a K-Rain 3410 Optical Pump Start Relay in conjunction with a K-Rain 1520 or 1510 mini coil power relay.

ELECTRICAL SPECIFICATIONS

• 2-Wire transformer; Input: 120/240 50/60 Hz Max Output: 27 VAC 100VA 3.7 AMP
• Midbox Transformer; Input: 120/240 50/60 Hz Max Output: 24 VAC 40VA 1.71 AMP
• Battery: 2032 Coin Cell (included) 9V alkaline battery (optional, not included)

Models

• 3400 110 VAC 2-wire decoder controller
• 3400-220 220 VAC 2-wire decoder controller
• 3420 110 VAC 2-wire decoder controller in stainless steel cabinet
• 3420-220 220 VAC 2-wire decoder controller in stainless steel cabinet
• 3421 110 VAC 2-wire decoder controller on stainless steel pedestal
• 3421-220 220 VAC 2-wire decoder controller on stainless steel pedestal

*Above models include 3403 2-wire module.

Bluetooth battery powered controller.

Features

• Ideal for areas where AC power is unavailable
• Change controller settings via smartphone, tablet or web browser
• Manage hundreds of controllers from one easy app
• Geo-location feature – see every site, every controller, every program
• CrewView™ feature allows program visibility anywhere
• Alerts you when a battery replacement is required
• Rain sensor and rain/freeze sensor ready – Allows automated operation to be controlled by sensor
• IP68 certified fully waterproof enclosure installs right in the valve box n 1, 2 and 4 station models.
• Molded out of UV resistant, high impact ABS resin
• Ideal for isolated/remote valve boxes where running power is expensive or difficult
• Standalone – works with 9V DC alkaline battery type.
• Full virtual back up – back up program information & preferences to the cloud for easy future restoration
• Seasonal adjust
• Manually start, stop or suspend your controller(s) from up to 35' away
• Add a passcode lock to each controller for added security

Specifications

OPERATING SPECIFICATIONS

• 1, 2 and 4 stations
• Master valve connection (Except for BLUE-1 single station)
• 6 programs, 8 start times
• Bluetooth range; 35' (10 m)

ELECTRICAL SPECIFICATIONS

• Works with 9V DC latching solenoids and a master valve equipped with a 9V DC latching solenoid
• Maximum distance between the timer and solenoid is 98' (30 m) with 18 AWG (.05" or 1, 55 mm2)

Models

• BLUE-1 1 Station
• BLUE-2 2 Station
• BLUE-4 4 Station

The 6000 line of indexing valves offers exceptional reliability and durability even under the dirtiest water conditions.

Features

• Metal Die-Cast Body – Durable, long lasting and capable of high pressure applications
• Available in 4 and 6 Outlet Models – Can quickly and easily change number of watering zones with a cam change
• Simplicity of Design – Valves are easily maintained & serviced for long product life
• Operates at 15 GPM at Pressures of 25–150 PSI – Ideal for pump-fed systems or high-flow city water systems
• Built-in Atmospheric Vacuum Breaker – Releases any vacuum created between the pump and the valve on shut down

Models

FOUR OUTLET MODELS

• 6402 Cammed for 2 Zone Operation
• 6403 Cammed for 3 Zone Operation
• 6404 Cammed for 4 Zone Operation

SIX OUTLET MODELS

• 6605 Cammed for 5 Zone Operation
• 6606 Cammed for 6 Zone Operation

Other options add to part number:

-RCW Reclaimed Water Use

Accessories*

• P8003050 Stem/disk Assembly Standard Heavy (.032-Red) 15 GPM** (57 LPM)
• P8003051 Stem/disk Assembly Light (.028-White) 10 GPM (38 LPM)
• P8003052 Stem/disk Assembly Extra Light (.025-Blue) 6 GPM (23 LPM)

Four built-in selectable nozzles – Fastest nozzle change of any rotor. Never have to remove a nozzle.

Adjustable arc (40°-360°) – all adjustments made from the top – wet or dry, no special tools needed

Matched precipitation rates – when nozzle setting matched to arc

Precision-engineered nozzles – for water-saving efficiency

Top arc set and degree indications – Allows for wet or dry adjustment in seconds.

Precision engineered nozzles – ensures water-saving efficiency.

Low-pressure operatio

The rain-tight, secure, rustproof enclosure provides a safe, secure housing built to last.

Features

The Pump Start Relay enclosure is constructed with a corrosion resistant, UV resistant, shockproof material

Nozzle Racks

P52775

MiniPro® and RPS 50 Nozzle Rack (red)

P51399

• ProPlus® Nozzle Rack (red)
• Standard: 0.5, 0.75, 1, 2, 3, 4, 6, 8 GPM
• Low Angle: 1, 3, 4, 6 GPM
• Pre-installed Nozzle: 2.5 GPM

P16001101

• RPS™ 75 Nozzle Rack (red)
• Standard: 0.75, 1, 1.5, 2, 4, 6, 8 GPM
• Low Angle: 1, 3, 4, 6 GPM
• Pre-installed Nozzle: 3.0 GPM

P16001102

ProPlus-RCW low angle nozzle rack

P16001110 

• RPS™ 75i, SuperPro Nozzle Rack (green)
• Standard: 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8 GPM
• Low Angle: 1, 1.5, 2, 3 GPM
• Pre-installed Nozzle: 2.5 GPM

Turn your irrigation controller into an expert water manager.

Features

UNIVERSAL RAIN SENSOR RECEIVER

• Flexibility. Allows a K-Rain Wireless Rain/Freeze Sensor to be paired with any manufacturer’s rain sensor terminal equipped controller
• Simplicity. Provides the advantage of extremely quick, easy installation and programming, along with simple pairing with a K-Rain Rain Sensor
• Weather Resistant. Engineered with impact modified, UV resistant polymer for outdoor exposure
• Maintenance Free. No batteries to replace

RAIN/FREEZE SENSORS 

• K-Rain Rain Sensor products efficiently suspend watering during rain and/or freeze periods.
• The K-Rain wireless rain-freeze sensor can be paired with multiple K-Rain PRO EX 2.0 Wifi enabled controllers within range, providing an additional value for the end user. The wired rain sensors work with closed circuit timers.
• 2 in 1 Mounting. Provides flexible installation with standard flat & gutter mounting
• Models 3208-WRFS and 3208-HRFS include a freeze sensor that prevents the irrigation system from starting when temperatures drop to 37°F or below

Models

• 3208-HRS Hardwired Rain Sensor
• 3208-HRFS Hardwired Rain-Freeze Sensor
• 3208-WRFS Wireless Rain/Freeze Sensor for PRO EX 2.0 or PRO EX 2.0 WiFi with RF Module installed
• 3208-WRFS-KIT Wireless Rain/Freeze Sensor and RF Module for PRO EX 2.0
• 3208-UWRFS Universal Wireless Rain/Freeze Sensor

Features

• Install Above or Below Grade 
• Pressure-compensating Emitters – Ensure uniform output across the entire length of run
• In-line Emitter Check Valves – Prevents drainage from the dripline when water pressure drops below 2.5 PSI, protecting against the siphoning of small sediment and soil particles into the drip emitter – ideal for sub-surface installation
• Available in Two Flow Rates and 2 spacing sizes – Provides maximum design flexibility in a variety of applications
• Drip Control Zone Kit – Pre-assembled for quick installation, heavy duty, corrosion resistant, 150 mesh stainless steel filter

Content

WiFi hub, RF module with small antenna, large antenna with coax cable.