SIDDHAPURA MACHINE TOOLS

Bhavnagar, Gujarat

Geared Pillar Drilling Machine SSC-40/1 Technical Specification : Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to table 515 mm Distance Spindle to base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 90/1000 RPM No. of Spindle Speed 8 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm Overall Height with guard 2130 mm Main Electrical Motor 2 speed : 1.75/2.5 H.P. Wooden Case L x W x H (approx) 925 x 650 x 2330 mm

Pillar Drilling Machine SSC-S-25 Technical Specification : Model No. SEW / S-25 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 255 mm Max, Spindle to table 650 mm Max, Spindle to base 1050 mm Taper in spindle M.T.3 Spindle Travel 185 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 345 X 345mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 950 X 500 X 1525 mm

Geared Pillar Drilling Machine SSC-A/2 Technical Specification Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to Table 515 mm Distance Spindle to Base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed (2) 0.08 0.04 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm V-Belt Section B - 62 Overall Height with guard 1830 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1140 x 650 x 1950 mm

Universal Radial Drilling Machine SMT-40/1200DC Technical Specification : Capacity : M.S. C.I. Drill Capacity 40 mm 40 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 90 to 1000RPM 5. Number of Power (2) 6. Power feed Range 0.20-0.10 mm / Rev. Working Range : 1. Drilling Radius Max./Min. mm. 1305-485 2. Distance from column to Spindle Max./Min. mm. 1200-380 3. Box Table LX WXH mm. 510x380x355 4. Distance from Base to Spindle Max./Min mm. 1180-500 5. Diameter of Column mm. 210 6. Vertical Power movement of Arm mm. 750 7. Horizontal Movement of Drilling Head 630 Base Plate : 1. L x W x H mm. 1800x900x180 mm 2. Working Surface mm. 1200x750 mm 3. No. of T-Slots mm. 4/16 mm Power : H.P. V. Belt Drilling Motor 1.5 1400KW/RPM 1.5 / 2800 KW/RPM Arm Elevating Motor 0.75 1400KW/RPM Shipping Size Approx LxWxH 1900x1000x2200

Geared Pillar Drilling Machine SSC-40/1 Technical Specification : Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to table 515 mm Distance Spindle to base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 90/1000 RPM No. of Spindle Speed 8 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm Overall Height with guard 2130 mm Main Electrical Motor 2 speed : 1.75/2.5 H.P. Wooden Case L x W x H (approx) 925 x 650 x 2330 mm

Geared Pillar Drilling Machine SSC-A/2 Technical Specification Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to Table 515 mm Distance Spindle to Base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed (2) 0.08 0.04 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm V-Belt Section B - 62 Overall Height with guard 1830 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1140 x 650 x 1950 mm

Universal Radial Drilling Machine SMTR-I Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 62-1980 5. Range of Power Feed mm / Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-44 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max./Min. mm. 895/440 2. Distance from column to Spindle Max./Min. mm. 810/360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max./Min mm. 930/230 5. Diametere of Column mm. 165 6. Swivel of Arm L/R Side mm. 90 Base Plate : 1. L x W x H mm. 925x600x120 mm 2. Working Surface mm. 820x610 mm 3. No. of T-Slots mm. 4/16 mm 4. Overall Height mm. 2000 mm Wooden case size L x W x H mm. 1250x1550x2000 mm

Geared Pillar Drilling Machine SSC-5 Technical Specification : Machine Capacity 40 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to table 500 mm Distance Spindle to base 930 mm Spindle Nose MT - 4 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 520 mm Dia. Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Universal Radial Drilling Machine SMTR-II Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel mm. 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed RPM 62-1980 5. Range of Power Feed mm / Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-45 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max./Min. mm. 895/440 2. Distance from column to Spindle Max./Min. mm. 810/360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max./Min mm. 930/230 5. Diametere of Column mm. 165 6. Swivel of Arm L/R Side 90 Base Plate : 1. L x W x H mm. 760x1250x150 mm 2. Working Surface mm. 820 x 610 3. No. of T-Slots mm. (4) 16 4. Overall Height mm. 2000 Wooden case size L x W x H mm. 1250 x 1550 x 2000 PDF Creator - PDF4Free v2.0 http://www.pdf4free.com

Geared Pillar Drilling Machine SSC-A/2 Technical Specification Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to Table 515 mm Distance Spindle to Base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed (2) 0.08 0.04 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm V-Belt Section B - 62 Overall Height with guard 1830 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1140 x 650 x 1950 mm

Geared Pillar Drilling Machine SSC-40/1 Technical Specification : Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to table 515 mm Distance Spindle to base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 90/1000 RPM No. of Spindle Speed 8 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm Overall Height with guard 2130 mm Main Electrical Motor 2 speed : 1.75/2.5 H.P. Wooden Case L x W x H (approx) 925 x 650 x 2330 mm

Pillar Drilling Machine SSC-P-1 Technical Specification : Model No. SSC-P-1 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 250 mm Max, Spindle to table 600 mm Max, Spindle to base 980 mm Taper in spindle M.T.3 Spindle Travel 250 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 375 mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 650 X 500 X 1525 mm

Universal Radial Drilling Machine SSC-25 Technical Specification : Capacity : Drill Capacity 25 mm Drill Head : 1. Size of Morse Taper M-T-3 2. Spindle Strok 185 mm 3. No. of Spindle Speed 8 4. Range of Spindle Speed 73-1800 RPM Power : Spindle Driver Moter 1 HP 1440 RPM Arm Elevating Motor 0.5 HP 1400 RPM Spindle Drive V-Belt B-42 Arm Elevating V-Belt A-18 Working Table : L x M x W 250 x 200 x 200 mm Working Range : 1. Drilling Radius Max./Min. 715/360 mm 2. Distance from column to Spindle Max./Min. 650/295 mm 3. Max Drill Head Travel 355 mm 4. Distance from Base to Spindle Max./Min 900/125 mm 5. Diametere of Column 130 mm 6. Swivel of Arm L/R Side 90 Base Plate : 1. L x W x H 925x600x120 mm 2. Working Surface 600x500 mm 3. No. of Slot Size 3/ 16 mm 4. Overall Height 1500 mm Wooden case size L x W x H 1000x700x1600 mm

Geared Pillar Drilling Machine SSC-40/1 Technical Specification : Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to table 515 mm Distance Spindle to base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 90/1000 RPM No. of Spindle Speed 8 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm Overall Height with guard 2130 mm Main Electrical Motor 2 speed : 1.75/2.5 H.P. Wooden Case L x W x H (approx) 925 x 650 x 2330 mm

Pillar Drilling Machine SSC-S-25 Technical Specification : Model No. SEW / S-25 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 255 mm Max, Spindle to table 650 mm Max, Spindle to base 1050 mm Taper in spindle M.T.3 Spindle Travel 185 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 345 X 345mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 950 X 500 X 1525 mm

Pillar Drilling Machine SSC-S-25 Technical Specification : Model No. SEW / S-25 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 255 mm Max, Spindle to table 650 mm Max, Spindle to base 1050 mm Taper in spindle M.T.3 Spindle Travel 185 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 345 X 345mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 950 X 500 X 1525 mm

Pillar Drilling Machine Model No-SSC-P-4 Technical Specification : Model No. SSC-P-4 Drilling Cap. (in steel) 19 mm 19 mm Column Dia. 74.35 mm 74.35 mm Centre of Spindle to table 200 mm 200 mm Max, Spindle to table 500/700 mm 210/405 mm Max, Spindle to base 925 mm 640 mm Taper in spindle M.T. -2 M.T. -2 Spindle Travel 125 mm 125 mm No. of speed/range 8/87 to 3200 RPM 8/87 to 3200 RPM Table size 260 X 260 mm 260 X 260 mm Base size (machined area) 260 X 235 mm 260 X 235 mm Overall base size 480 X 300 mm 480 X 300 mm Overall height with guard 1475 mm 1170 mm V-Belt selection A-42 A-42 Elec. Motor-1440 RPm 0.50 H.P. 0.50 H.P. Wooden Case Size LXWXH 700 X 400 X 1600 mm 700 X 400 X 1300 mm

Geared Pillar Drilling Machine SSC-4 Technical Specification : Machine Capacity 32 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to Table 625 mm Distance Spindle to Base 1045 mm Spindle Nose MT - 3 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 390 x 390 mm Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Geared Pillar Drilling Machine SSC-4 Technical Specification : Machine Capacity 32 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to Table 625 mm Distance Spindle to Base 1045 mm Spindle Nose MT - 3 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 390 x 390 mm Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Pillar Drilling Machine SSC-P-1 Technical Specification : Model No. SSC-P-1 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 250 mm Max, Spindle to table 600 mm Max, Spindle to base 980 mm Taper in spindle M.T.3 Spindle Travel 250 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 375 mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 650 X 500 X 1525 mm

Geared Pillar Drilling Machine SSC-4 Technical Specification : Machine Capacity 32 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to Table 625 mm Distance Spindle to Base 1045 mm Spindle Nose MT - 3 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 390 x 390 mm Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Pillar Drilling Machine Model No-SSC-P-4 Technical Specification : Model No. SSC-P-4 Drilling Cap. (in steel) 19 mm 19 mm Column Dia. 74.35 mm 74.35 mm Centre of Spindle to table 200 mm 200 mm Max, Spindle to table 500/700 mm 210/405 mm Max, Spindle to base 925 mm 640 mm Taper in spindle M.T. -2 M.T. -2 Spindle Travel 125 mm 125 mm No. of speed/range 8/87 to 3200 RPM 8/87 to 3200 RPM Table size 260 X 260 mm 260 X 260 mm Base size (machined area) 260 X 235 mm 260 X 235 mm Overall base size 480 X 300 mm 480 X 300 mm Overall height with guard 1475 mm 1170 mm V-Belt selection A-42 A-42 Elec. Motor-1440 RPm 0.50 H.P. 0.50 H.P. Wooden Case Size LXWXH 700 X 400 X 1600 mm 700 X 400 X 1300 mm

Pillar Drilling Machine Model No-SSC-P-4 Technical Specification : Model No. SSC-P-4 Drilling Cap. (in steel) 19 mm 19 mm Column Dia. 74.35 mm 74.35 mm Centre of Spindle to table 200 mm 200 mm Max, Spindle to table 500/700 mm 210/405 mm Max, Spindle to base 925 mm 640 mm Taper in spindle M.T. -2 M.T. -2 Spindle Travel 125 mm 125 mm No. of speed/range 8/87 to 3200 RPM 8/87 to 3200 RPM Table size 260 X 260 mm 260 X 260 mm Base size (machined area) 260 X 235 mm 260 X 235 mm Overall base size 480 X 300 mm 480 X 300 mm Overall height with guard 1475 mm 1170 mm V-Belt selection A-42 A-42 Elec. Motor-1440 RPm 0.50 H.P. 0.50 H.P. Wooden Case Size LXWXH 700 X 400 X 1600 mm 700 X 400 X 1300 mm

Pillar Drilling Machine SSC-P-1 Technical Specification : Model No. SSC-P-1 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 250 mm Max, Spindle to table 600 mm Max, Spindle to base 980 mm Taper in spindle M.T.3 Spindle Travel 250 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 375 mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 650 X 500 X 1525 mm