SIDDHAPURA MACHINE TOOLS

Bhavnagar, Gujarat

Geared Pillar Drilling Machine SSC-A/2 Technical Specification Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to Table 515 mm Distance Spindle to Base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed (2) 0.08 0.04 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm V-Belt Section B - 62 Overall Height with guard 1830 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1140 x 650 x 1950 mm

Geared Pillar Drilling Machine SSC-4 Technical Specification : Machine Capacity 32 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to Table 625 mm Distance Spindle to Base 1045 mm Spindle Nose MT - 3 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 390 x 390 mm Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Geared Pillar Drilling Machine SSC-5 Technical Specification : Machine Capacity 40 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to table 500 mm Distance Spindle to base 930 mm Spindle Nose MT - 4 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 520 mm Dia. Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Pillar Drilling Machine SSC-P-1 Technical Specification : Model No. SSC-P-1 Drilling Cap. (in steel) 25 mm Column Dia. 87.60 mm Centre of Spindle to table 250 mm Max, Spindle to table 600 mm Max, Spindle to base 980 mm Taper in spindle M.T.3 Spindle Travel 250 mm No. of speed 8 Range of Speed 73 to 1800 RPM Table size 375 mm Dia. Base size (machined area) 350 X 325 mm Overall base size 625 X 420 mm Overall height with guard 1675 mm V-Belt selection B-52 Elec. Motor-1440 RPm 1 H.P. Wooden Case Size 650 X 500 X 1525 mm

Pillar Drilling Machine Model No-SSC-P-4 Technical Specification : Model No. SSC-P-4 Drilling Cap. (in steel) 19 mm 19 mm Column Dia. 74.35 mm 74.35 mm Centre of Spindle to table 200 mm 200 mm Max, Spindle to table 500/700 mm 210/405 mm Max, Spindle to base 925 mm 640 mm Taper in spindle M.T. -2 M.T. -2 Spindle Travel 125 mm 125 mm No. of speed/range 8/87 to 3200 RPM 8/87 to 3200 RPM Table size 260 X 260 mm 260 X 260 mm Base size (machined area) 260 X 235 mm 260 X 235 mm Overall base size 480 X 300 mm 480 X 300 mm Overall height with guard 1475 mm 1170 mm V-Belt selection A-42 A-42 Elec. Motor-1440 RPm 0.50 H.P. 0.50 H.P. Wooden Case Size LXWXH 700 X 400 X 1600 mm 700 X 400 X 1300 mm

SSC-G-25X2 CAPICITY M.S. Drilling Cap. ( In Steel) 25mm Column Dia 87.6mm Distance between two units 380mm Center of spindle to column 250mm Max. Spindle to table 350mm Taper in Spindle MT-3 Spindle travel 185mm No. of speed 8 Range of speed 73 to 1800 RPM Table Size 1000 x 610mm V-belt Section B-52 Power 1 HP 1440 RPM

We are offering cap radial drill machine. Specification smtr-iii gadrilling capacity - 38mm to 40mmdrill head1.spindle nose - mt-42.spindle travel - 2203.no of spindle - 84.range of spindle speed(rpm) - 90 to 1000rpm5.range of power feed - (2) 0.20-0.10power1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-beltworking tablel x w x h - 380 x 300 x 300working range 1.drilling radius max.min. - 8954402.max.min.dist.column to spindle - 8502753. Max.drill head drive - 4504.max.min. Base plate to spindle -9302305.diameter of column -168 base plate l x w x h -760 x 1250 x 150working surface -820 x 610 no. Of t-slot -4dimension overall height 2000wooden case(l x w x h) -1250 x 1550 x 2000

We are offering 32mm cap pillar drilling machine. Geared pillar drilling machine ssc-4 technical specification : machine capacity 32 mm column diameter 114 mm centre of spindle to column 280 mm distance spindle to table 625 mm distance spindle to base 1045 mm spindle nose mt - 3 spindle travel 170 mm range of spindle speed 75 2070 rpm no. Of spindle speed 8 range of power feed manual table size 390 x 390 mm base size (machined area) 390 x 390 mm v-belt section b - 58 overall height with guard 1745 mm main electrical motor 1.5 hp wooden case l x w x h 1050 x 600 x 1900 mm

We are offering 32mm cap fine feed pillar drilling machine, geared pillar drilling machine ssc-4 technical specification : machine capacity 32 mm column diameter 114 mm centre of spindle to column 280 mm distance spindle to table 625 mm distance spindle to base 1045 mm spindle nose mt - 3 spindle travel 170 mm range of spindle speed 75 2070 rpm no. Of spindle speed 8 range of power feed manual table size 390 x 390 mm base size (machined area) 390 x 390 mm v-belt section b - 58 overall height with guard 1745 mm main electrical motor 1.5 hp wooden case l x w x h 1050 x 600 x 1900 mm

we are offering Universal Radial Drilling Machine SMTR-II Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel mm. 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed RPM 62-1980 5. Range of Power Feed mm Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-45 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max.Min. mm. 895440 2. Distance from column to Spindle Max.Min. mm. 810360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max.Min mm. 930230 5. Diametere of Column mm. 165 6. Swivel of Arm LR Side 90 Base Plate : 1. L x W x H mm. 760x1250x150 mm 2. Working Surface mm. 820 x 610 3. No. of T-Slots mm. (4) 16 4. Overall Height mm. 2000 Wooden case size L x W x H mm. 1250 x 1550 x 2000

we are offering universal radial drilling machine ser-i technical specification : capacity : m.s. c.i. drill capacity 38 mm 38 mm drill head : 1. spindle nose mt 4 2. spindle travel 220 3. no. of spindle speed 8 4. range of spindle speed 62-1980 5. range of power feed mm rev. (2) 0.08-0.04 power : h.p. v. belt main motor 1.5 b-44 arm elevating motor 0.5 a-23 working table : l x m x w mm. 380x300x300 working range : 1. drilling radius max.min. mm. 895440 2. distance from column to spindle max.min. mm. 810360 3. max drill head travel mm. 450 4. distance from base to spindle max.min mm. 930230 5. diametere of column mm. 165 6. swivel of arm lr side mm. 90 base plate : 1. l x w x h mm. 925x600x120 mm 2. working surface mm. 820x610 mm 3. no. of t-slots mm. 416 mm 4. overall height mm. 2000 mm wooden case size l x w x h mm. 1250x1550x2000 mm

Universal Radial Drilling Machine SMT-40/1200DC Technical Specification : Capacity : M.S. C.I. Drill Capacity 40 mm 40 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 90 to 1000RPM 5. Number of Power (2) 6. Power feed Range 0.20-0.10 mm / Rev. Working Range : 1. Drilling Radius Max./Min. mm. 1305-485 2. Distance from column to Spindle Max./Min. mm. 1200-380 3. Box Table LX WXH mm. 510x380x355 4. Distance from Base to Spindle Max./Min mm. 1180-500 5. Diameter of Column mm. 210 6. Vertical Power movement of Arm mm. 750 7. Horizontal Movement of Drilling Head 630 Base Plate : 1. L x W x H mm. 1800x900x180 mm 2. Working Surface mm. 1200x750 mm 3. No. of T-Slots mm. 4/16 mm Power : H.P. V. Belt Drilling Motor 1.5 1400KW/RPM 1.5 / 2800 KW/RPM Arm Elevating Motor 0.75 1400KW/RPM Shipping Size Approx LxWxH 1900x1000x2200

Geared Pillar Drilling Cum Milling Machine SSC-3M Technical Specification : In : Drilling 40 mm Cast : Face Mill 100 mm Iron : End Mill 25 mm Iron : Tapping 22 mm In Mild Steel Drilling 35 mm Column Diameter 130 mm Swing 610 Working surface 435 x 200 mm Longitudinal Travel Manual 325 mm Cross Travel 250 mm Vertical Travel 400 mm Quill Travel 220 mm Spindle Taper MT - 4 Range of Spindle Speed 75 to 2070 RPM No. Of Spindle Speed 8 Distance Spindle to Base 940 mm Base Size (Machine Area) 490 x 470 mm Overall Height With Guard 1830 mm Main Electrical Motor 1.5 HP V - Belt Section B - 62 Wooden Case (L x W x H) 1140 x 800 x 1950 mm

In : Drilling 40 mm Cast : Face Mill 100 mm Iron : End Mill 25 mm : Tapping 22 mm In mild Steel Drilling 35 mm Column Diameter 114 mm Swing 560 Vmm Working Surface 725 x 224 mm Longitudinal Travel Manual 340 mm Cross Travel 305 mm Vertical Travel 830 mm Quill Travel 220 mm Spindle Taper MT-4 Range of Spindle Speed 75 to 2070 RPM No. of Spindle Speed 8 Range of Power Feed (2) 0.08 & 0.04 Distance Spindle To Base 830 mm Overall Height with Guard 1780 mm Main Electrical Motor 1.5 HP Shipping Case ( L x W x H ) 1170 x 915 x 1570 mm

Geared Pillar Drilling Machine SSC-40/1 Technical Specification : Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to table 515 mm Distance Spindle to base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 90/1000 RPM No. of Spindle Speed 8 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm Overall Height with guard 2130 mm Main Electrical Motor 2 speed : 1.75/2.5 H.P. Wooden Case L x W x H (approx) 925 x 650 x 2330 mm

Pillar Drilling Machine Model No-SSC-P-4 Technical Specification : Model No. SSC-P-4 Drilling Cap. (in steel) 19 mm 19 mm Column Dia. 74.35 mm 74.35 mm Centre of Spindle to table 200 mm 200 mm Max, Spindle to table 500/700 mm 210/405 mm Max, Spindle to base 925 mm 640 mm Taper in spindle M.T. -2 M.T. -2 Spindle Travel 125 mm 125 mm No. of speed/range 8/87 to 3200 RPM 8/87 to 3200 RPM Table size 260 X 260 mm 260 X 260 mm Base size (machined area) 260 X 235 mm 260 X 235 mm Overall base size 480 X 300 mm 480 X 300 mm Overall height with guard 1475 mm 1170 mm V-Belt selection A-42 A-42 Elec. Motor-1440 RPm 0.50 H.P. 0.50 H.P. Wooden Case Size LXWXH 700 X 400 X 1600 mm 700 X 400 X 1300 mm

SSC-G-25X2 CAPICITY M.S. Drilling Cap. ( In Steel) 25mm Column Dia 87.6mm Distance between two units 380mm Center of spindle to column 250mm Max. Spindle to table 350mm Taper in Spindle MT-3 Spindle travel 185mm No. of speed 8 Range of speed 73 to 1800 RPM Table Size 1000 x 610mm V-belt Section B-52 Power 1 HP 1440 RPM

SSC-G-25X2 CAPICITY M.S. Drilling Cap. ( In Steel) 25mm Column Dia 87.6mm Distance between two units 380mm Center of spindle to column 250mm Max. Spindle to table 350mm Taper in Spindle MT-3 Spindle travel 185mm No. of speed 8 Range of speed 73 to 1800 RPM Table Size 1000 x 610mm V-belt Section B-52 Power 1 HP 1440 RPM

Universal Radial Drilling Machine SMT-40/1200DC

Technical Specification :

Capacity : M.S. C.I.

Drill Capacity 40 mm 40 mm

Drill Head :

1. Spindle nose MT 4

2. Spindle Travel 220

3. No. of Spindle Speed 8

4. Range of Spindle Speed 90 to 1000RPM

5. Number of Power

(2)

6. Power feed Range

0.20-0.10 mm / Rev.

Working Range :

1. Drilling Radius Max./Min. mm. 1305-485

2. Distance from column to Spindle

Max./Min.

mm. 1200-380

3. Box Table LX WXH mm. 510x380x355

4. Distance from Base to Spindle

Max./Min

mm. 1180-500

5. Diameter of Column mm. 210

6. Vertical Power movement of Arm mm. 750

7. Horizontal Movement of Drilling Head 630

Base Plate :

1. L x W x H mm. 1800x900x180 mm

2. Working Surface mm. 1200x750 mm

3. No. of T-Slots mm. 4/16 mm

Power : H.P. V. Belt

Drilling Motor 1.5 1400KW/RPM

1.5 / 2800 KW/RPM

Arm Elevating Motor 0.75 1400KW/RPM

Shipping Size Approx LxWxH 1900x1000x2200

We are offering 45mm cap drilling machine. Specification smtr-iii gadrilling capacity - 38mm to 40mmdrill head1.spindle nose - mt-42.spindle travel - 2203.no of spindle - 84.range of spindle speed(rpm) - 90 to 1000rpm5.range of power feed - (2) 0.20-0.10power1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-beltworking tablel x w x h - 380 x 300 x 300working range 1.drilling radius max.min. - 8954402.max.min.dist.column to spindle - 8502753. Max.drill head drive - 4504.max.min. Base plate to spindle -9302305.diameter of column -168 base plate l x w x h -760 x 1250 x 150working surface -820 x 610 no. Of t-slot -4dimension overall height 2000wooden case(l x w x h) -1250 x 1550 x 2000

Drilling-Cum Milling Machine Model SSC - 6DMU In : Drilling 40 mm Cast : Face Mill 100 mm Iron : End Mill 25 mm : Tapping 22 mm In mild Steel Drilling 35 mm Column Diameter 114 mm Swing 560 Vmm Working Surface 725 x 224 mm Longitudinal Travel Manual 340 mm Cross Travel 305 mm Vertical Travel 830 mm Quill Travel 170 mm Spindle Taper MT-4 Range of Spindle Speed 75 to 2070 RPM No. of Spindle Speed 8 Distance Spindle To Base 830 mm Overall Height with Guard 1780 mm Main Electrical Motor 1.5 HP V-belt Section B-58 Shipping Case ( L x W x H ) 1170 x 915 x 1570 mm

Geared Pillar Drilling Machine SSC-A/2 Technical Specification Machine Capacity 40 mm Column Diameter 130 mm Centre of Spindle to Column 305 mm Distance Spindle to Table 515 mm Distance Spindle to Base 1040 mm Spindle Nose MT - 4 Spindle Travel 215 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed (2) 0.08 0.04 Table size 435 x 435 mm Base size (machined area) 490 x 470 mm V-Belt Section B - 62 Overall Height with guard 1830 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1140 x 650 x 1950 mm

We are offering smtr-iiig all gear radial drilling machine.Specification smtr-iii gadrilling capacity - 38mm to 40mmdrill head1.spindle nose - mt-42.spindle travel - 2203.no of spindle - 84.range of spindle speed(rpm) - 90 to 1000rpm5.range of power feed - (2) 0.20-0.10power1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-beltworking tablel x w x h - 380 x 300 x 300working range 1.drilling radius max.min. - 8954402.max.min.dist.column to spindle - 8502753. Max.drill head drive - 4504.max.min. Base plate to spindle -9302305.diameter of column -168 base plate l x w x h -760 x 1250 x 150working surface -820 x 610 no. Of t-slot -4dimension overall height 2000wooden case(l x w x h) -1250 x 1550 x 2000

Specification SMTR-III G/A Drilling Capacity - 38mm to 40mm DRILL HEAD 1.Spindle Nose - MT-4 2.Spindle Travel - 220 3.No of Spindle - 8 4.Range of Spindle Speed(RPM) - 90 to 1000RPM 5.Range of Power Feed - (2) 0.20-0.10 POWER 1.Main Motor (1.5 HP ) - 1400KW/RPM 1.55/2800 KW/RPM 2.Arm Elevating Motor (0.5 HP) - A-23 V-Belt WORKING TABLE L x W x H - 380 x 300 x 300 WORKING RANGE 1.Drilling Radius Max./Min. - 895/440 2.Max./Min.Dist.Column to Spindle - 850/275 3. Max.Drill Head Drive - 450 4.Max./Min. Base Plate to Spindle -930/230 5.Diameter of Column -168 BASE PLATE L x W x H -760 x 1250 x 150 Working Surface -820 x 610 No. of T-Slot -4 DIMENSION Overall Height– 2000 Wooden Case(L x W x H) -1250 x 1550 x 2000

Geared Pillar Drilling Machine SSC-A/2

Technical Specification

Machine Capacity

40 mm

Column Diameter

130 mm

Centre of Spindle to Column

305 mm

Distance Spindle to Table

515 mm

Distance Spindle to Base

1040 mm

Spindle Nose

MT - 4

Spindle Travel

215 mm

Range of Spindle Speed

75 / 2070 RPM

No. of Spindle Speed

8

Range of power feed

(2) 0.08 0.04

Table size

435 x 435 mm

Base size (machined area)

490 x 470 mm

V-Belt Section

B - 62

Overall Height with guard

1830 mm

Main Electrical Motor

1.5 HP

Wooden Case L x W x H

1140 x 650 x 1950 mm

We are offering 40mm cap auto feed radial drill machine. Specification smtr-3 ga drilling capacity - 38mm to 40mm drill head 1.spindle nose - mt-4 2.spindle travel - 220 3.no of spindle - 8 4.range of spindle speed(rpm) - 90 to 1000rpm 5.range of power feed - (2) 0.20-0.10 power 1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-belt working table l x w x h - 380 x 300 x 300 working range 1.drilling radius max.min. - 895440 2.max.min.dist.column to spindle - 850275 3. Max.drill head drive - 450 4.max.min. Base plate to spindle -930230 5.diameter of column -168 base plate l x w x h -760 x 1250 x 150 working surface -820 x 610 no. Of t-slot -4 dimension overall heightâ 2000 wooden case(l x w x h) -1250 x 1550 x 2000

Universal Radial Drilling Machine SMT-40/1200DC Technical Specification : Capacity : M.S. C.I. Drill Capacity 40 mm 40 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 90 to 1000RPM 5. Number of Power (2) 6. Power feed Range 0.20-0.10 mm / Rev. Working Range : 1. Drilling Radius Max./Min. mm. 1305-485 2. Distance from column to Spindle Max./Min. mm. 1200-380 3. Box Table LX WXH mm. 510x380x355 4. Distance from Base to Spindle Max./Min mm. 1180-500 5. Diameter of Column mm. 210 6. Vertical Power movement of Arm mm. 750 7. Horizontal Movement of Drilling Head 630 Base Plate : 1. L x W x H mm. 1800x900x180 mm 2. Working Surface mm. 1200x750 mm 3. No. of T-Slots mm. 4/16 mm Power : H.P. V. Belt Drilling Motor 1.5 1400KW/RPM 1.5 / 2800 KW/RPM Arm Elevating Motor 0.75 1400KW/RPM Shipping Size Approx LxWxH 1900x1000x2200

Universal Radial Drilling Machine SSC-25 Technical Specification : Capacity : Drill Capacity 25 mm Drill Head : 1. Size of Morse Taper M-T-3 2. Spindle Strok 185 mm 3. No. of Spindle Speed 8 4. Range of Spindle Speed 73-1800 RPM Power : Spindle Driver Moter 1 HP 1440 RPM Arm Elevating Motor 0.5 HP 1400 RPM Spindle Drive V-Belt B-42 Arm Elevating V-Belt A-18 Working Table : L x M x W 250 x 200 x 200 mm Working Range : 1. Drilling Radius Max./Min. 715/360 mm 2. Distance from column to Spindle Max./Min. 650/295 mm 3. Max Drill Head Travel 355 mm 4. Distance from Base to Spindle Max./Min 900/125 mm 5. Diametere of Column 130 mm 6. Swivel of Arm L/R Side 90 Base Plate : 1. L x W x H 925x600x120 mm 2. Working Surface 600x500 mm 3. No. of Slot Size 3/ 16 mm 4. Overall Height 1500 mm Wooden case size L x W x H 1000x700x1600 mm

We offer gear radial drilling machine specification smtr-iii ga drilling capacity - 38mm to 40mm drill head 1.spindle nose - mt-4 2.spindle travel - 220 3.no of spindle - 8 4.range of spindle speed(rpm) - 90 to 1000rpm 5.range of power feed - (2) 0.20-0.10 power 1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-belt working table l x w x h - 380 x 300 x 300 working range 1.drilling radius max.min. - 895440 2.max.min.dist.column to spindle - 850275 3. Max.drill head drive - 450 4.max.min. Base plate to spindle -930230 5.diameter of column -168 base plate l x w x h -760 x 1250 x 150 working surface -820 x 610 no. Of t-slot -4 dimension overall heightâ 2000 wooden case(l x w x h) -1250 x 1550 x 2000

We are offering drilling machine with all gear. Specification smtr-iii ga drilling capacity - 38mm to 40mm drill head 1.spindle nose - mt-4 2.spindle travel - 220 3.no of spindle - 8 4.range of spindle speed(rpm) - 90 to 1000rpm 5.range of power feed - (2) 0.20-0.10 power 1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-belt working table l x w x h - 380 x 300 x 300 working range 1.drilling radius max.min. - 895440 2.max.min.dist.column to spindle - 850275 3. Max.drill head drive - 450 4.max.min. Base plate to spindle -930230 5.diameter of column -168 base plate l x w x h -760 x 1250 x 150 working surface -820 x 610 no. Of t-slot -4 dimension overall heightã¢ï¿½ï¿½ 2000 wooden case(l x w x h) -1250 x 1550 x 2000

Autofeed all gear radial drilling machine specification smtr-iii ga drilling capacity - 38mm to 40mm drill head 1.spindle nose - mt-4 2.spindle travel - 220 3.no of spindle - 8 4.range of spindle speed(rpm) - 90 to 1000rpm 5.range of power feed - (2) 0.20-0.10 power 1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-belt working table l x w x h - 380 x 300 x 300 working range 1.drilling radius max.min. - 895440 2.max.min.dist.column to spindle - 850275 3. Max.drill head drive - 450 4.max.min. Base plate to spindle -930230 5.diameter of column -168 base plate l x w x h -760 x 1250 x 150 working surface -820 x 610 no. Of t-slot -4 dimension overall heightâ 2000 wooden case(l x w x h) -1250 x 1550 x 2000

Specification smtr-iii gadrilling capacity - 38mm to 40mmdrill head1.spindle nose - mt-42.spindle travel - 2203.no of spindle - 84.range of spindle speed(rpm) - 90 to 1000rpm5.range of power feed - (2) 0.20-0.10power1.main motor (1.5 hp ) - 1400kwrpm 1.552800 kwrpm 2.arm elevating motor (0.5 hp) - a-23 v-beltworking tablel x w x h - 380 x 300 x 300working range 1.drilling radius max.min. - 8954402.max.min.dist.column to spindle - 8502753. Max.drill head drive - 4504.max.min. Base plate to spindle -9302305.diameter of column -168 base plate l x w x h -760 x 1250 x 150working surface -820 x 610 no. Of t-slot -4dimension overall height 2000wooden case(l x w x h) -1250 x 1550 x 2000

specification smtr-iii g/a drilling capacity - 38mm to 40mm drill head 1.spindle nose - mt-4 2.spindle travel - 220 3.no of spindle - 8 4.range of spindle speed(rpm) - 90 to 1000rpm 5.range of power feed - (2) 0.20-0.10 power 1.main motor (1.5 hp ) - 1400kw/rpm 1.55/2800 kw/rpm 2.arm elevating motor (0.5 hp) - a-23 v-belt working table l x w x h - 380 x 300 x 300 working range 1.drilling radius max./min. - 895/440 2.max./min.dist.column to spindle - 850/275 3. max.drill head drive - 450 4.max./min. base plate to spindle -930/230 5.diameter of column -168 base plate l x w x h -760 x 1250 x 150 working surface -820 x 610 no. of t-slot -4 dimension overall height 2000 wooden case(l x w x h) -1250 x 1550 x 2000

Specification SMTR-III G/A Drilling Capacity - 38mm to 40mm DRILL HEAD 1.Spindle Nose - MT-4 2.Spindle Travel - 220 3.No of Spindle - 8 4.Range of Spindle Speed(RPM) - 90 to 1000RPM 5.Range of Power Feed - (2) 0.20-0.10 POWER 1.Main Motor (1.5 HP ) - 1400KW/RPM 1.55/2800 KW/RPM 2.Arm Elevating Motor (0.5 HP) - A-23 V-Belt WORKING TABLE L x W x H - 380 x 300 x 300 WORKING RANGE 1.Drilling Radius Max./Min. - 895/440 2.Max./Min.Dist.Column to Spindle - 850/275 3. Max.Drill Head Drive - 450 4.Max./Min. Base Plate to Spindle -930/230 5.Diameter of Column -168 BASE PLATE L x W x H -760 x 1250 x 150 Working Surface -820 x 610 No. of T-Slot -4 DIMENSION Overall Height– 2000 Wooden Case(L x W x H) -1250 x 1550 x 2000

Specification SMTR-III G/A

Drilling Capacity   - 38mm to 40mm

DRILL HEAD

1.Spindle Nose - MT-4

2.Spindle Travel - 220

3.No of Spindle - 8

4.Range of Spindle Speed(RPM) - 90 to 1000RPM

5.Range of Power Feed - (2) 0.20-0.10

POWER

1.Main Motor (1.5 HP )  - 1400KW/RPM 1.55/2800 KW/RPM

2.Arm Elevating Motor (0.5 HP) - A-23 V-Belt

WORKING TABLE

L x W x H  - 380 x 300 x 300

WORKING RANGE

1.Drilling Radius Max./Min. - 895/440

2.Max./Min.Dist.Column to Spindle - 850/275

3. Max.Drill Head Drive - 450

4.Max./Min. Base Plate to Spindle -930/230

5.Diameter of Column -168

BASE PLATE

L x W x H -760 x 1250 x 150

Working  Surface -820 x 610

No. of T-Slot  -4

DIMENSION

Overall Height– 2000

Wooden Case(L x W x H) -1250 x 1550 x 2000

Universal Radial Drilling Machine SMTR-I Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 62-1980 5. Range of Power Feed mm / Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-44 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max./Min. mm. 895/440 2. Distance from column to Spindle Max./Min. mm. 810/360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max./Min mm. 930/230 5. Diametere of Column mm. 165 6. Swivel of Arm L/R Side mm. 90 Base Plate : 1. L x W x H mm. 925x600x120 mm 2. Working Surface mm. 820x610 mm 3. No. of T-Slots mm. 4/16 mm 4. Overall Height mm. 2000 mm Wooden case size L x W x H mm. 1250x1550x2000 mm

Geared Pillar Drilling Machine SSC-5 Technical Specification : Machine Capacity 40 mm Column Diameter 114 mm Centre of Spindle to Column 280 mm Distance Spindle to table 500 mm Distance Spindle to base 930 mm Spindle Nose MT - 4 Spindle Travel 170 mm Range of Spindle Speed 75 / 2070 RPM No. of Spindle Speed 8 Range of power feed Manual Table size 520 mm Dia. Base size (machined area) 390 x 390 mm V-Belt Section B - 58 Overall Height with guard 1745 mm Main Electrical Motor 1.5 HP Wooden Case L x W x H 1050 x 600 x 1900 mm

Universal Radial Drilling Machine SMTR-I Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 62-1980 5. Range of Power Feed mm / Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-44 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max./Min. mm. 895/440 2. Distance from column to Spindle Max./Min. mm. 810/360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max./Min mm. 930/230 5. Diametere of Column mm. 165 6. Swivel of Arm L/R Side mm. 90 Base Plate : 1. L x W x H mm. 925x600x120 mm 2. Working Surface mm. 820x610 mm 3. No. of T-Slots mm. 4/16 mm 4. Overall Height mm. 2000 mm Wooden case size L x W x H mm. 1250x1550x2000 mm

Universal Radial Drilling Machine SER-I

Technical Specification :

Capacity : M.S. C.I.

Drill Capacity

38 mm

38 mm Drill Head :

1. Spindle nose

MT 4

2. Spindle Travel

220

3. No. of Spindle Speed

8

4. Range of Spindle Speed

62-1980

5. Range of Power Feed

mm / Rev.

(2) 0.08-0.04 Power : H.P. V. Belt

Main Motor

1.5

B-44

Arm Elevating Motor

0.5

A-23 Working Table :

L x M x W

mm.

380x300x300 Working Range :

1. Drilling Radius Max./Min.

mm.

895/440

2. Distance from column to Spindle Max./Min.

mm.

810/360

3. Max Drill Head Travel

mm.

450

4. Distance from Base to Spindle Max./Min

mm.

930/230

5. Diametere of Column

mm.

165

6. Swivel of Arm L/R Side

mm.

90 Base Plate :

1. L x W x H

mm.

925x600x120 mm

2. Working Surface

mm.

820x610 mm

3. No. of T-Slots

mm.

4/16 mm

4. Overall Height

mm.

2000 mm

Wooden case size L x W x H

mm.

1250x1550x2000 mm

Universal Radial Drilling Machine SMTR-II

Technical Specification :

Capacity : M.S. C.I.

Drill Capacity 38 mm 38 mm

Drill Head :

1. Spindle nose MT 4

2. Spindle Travel mm. 220

3. No. of Spindle Speed 8

4. Range of Spindle Speed RPM 62-1980

5. Range of Power Feed mm /

Rev.

(2) 0.08-0.04

Power : H.P. V. Belt

Main Motor 1.5 B-45

Arm Elevating Motor 0.5 A-23

Working Table :

L x M x W mm. 380x300x300

Working Range :

1. Drilling Radius Max./Min. mm. 895/440

2. Distance from column to Spindle

Max./Min. mm. 810/360

3. Max Drill Head Travel mm. 450

4. Distance from Base to Spindle

Max./Min

mm. 930/230

5. Diametere of Column mm. 165

6. Swivel of Arm L/R Side 90

Base Plate :

1. L x W x H mm. 760x1250x150

mm

2. Working Surface mm. 820 x 610

3. No. of T-Slots mm. (4) 16

4. Overall Height mm. 2000

Wooden case size L x W x H mm. 1250 x 1550 x

2000

We are offering 40mm cap radial autofeed drilling machine, universal radial drilling machine smtr-ii technical specification : capacity : m.s. C.i. Drill capacity 38 mm 38 mm drill head : 1. Spindle nose mt 4 2. Spindle travel mm. 220 3. No. Of spindle speed 8 4. Range of spindle speed rpm 62-1980 5. Range of power feed mm rev. (2) 0.08-0.04 power : h.p. V. Belt main motor 1.5 b-45 arm elevating motor 0.5 a-23 working table : l x m x w mm. 380x300x300 working range : 1. Drilling radius max.min. Mm. 895440 2. Distance from column to spindle max.min. Mm. 810360 3. Max drill head travel mm. 450 4. Distance from base to spindle max.min mm. 930230 5. Diametere of column mm. 165 6. Swivel of arm lr side 90 base plate : 1. L x w x h mm. 760x1250x150 mm 2. Working surface mm. 820 x 610 3. No. Of t-slots mm. (4) 16 4. Overall height mm. 2000 wooden case size l x w x h mm. 1250 x 1550 x 2000

Universal Radial Drilling Machine SMTR-II Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel mm. 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed RPM 62-1980 5. Range of Power Feed mm / Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-45 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max./Min. mm. 895/440 2. Distance from column to Spindle Max./Min. mm. 810/360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max./Min mm. 930/230 5. Diametere of Column mm. 165 6. Swivel of Arm L/R Side 90 Base Plate : 1. L x W x H mm. 760x1250x150 mm 2. Working Surface mm. 820 x 610 3. No. of T-Slots mm. (4) 16 4. Overall Height mm. 2000 Wooden case size L x W x H mm. 1250 x 1550 x 2000 PDF Creator - PDF4Free v2.0 http://www.pdf4free.com

The SSC-5 Fine Feed Pillar Drilling Machine, provided by us, is acclaimed for its durability. By making use of premium packaging material, we can guarantee zero damage during transit. Moreover, our packaging experts stringently check the entire lot prior to final dispatch. Customers' satisfaction is our utmost priority and thus, we deliver only certified array of products to them.

The high performance and durability of SSC/S-25 Fine Feed Precision Pillar Drilling Machine make it preferred in the market. Our stern examination in the raw materials and other inputs help us presenting quality assortment of products. With complete inspection on all materials, we ensure premium quality of products. We are backed by a reliable team of packaging professionals and modern facility that aid us completely for furnishing standard as well as tailored packaging requirements of the patrons.

Cap Drilling Cum Milling Machine offers a unique combination of milling and drilling operations.  Our company stands tall among the proficient Manufacturers, Suppliers and Exporters of Cap Drilling Cum Milling Machine from Gujarat. The Cap Milling Cum Drilling Machines we deal in are accurate machines, which are simple to operate and install. Our Cap Milling Cum Drilling Machine is most suitable for mass production at low cost.

 

 

Our products are manufactured keeping in mind international quality standards. Thus, they are reliable and worth their price. Being a quality-conscious firm, we are offering nothing short of the best quality products from Bhavnagar(India).

Standard Equipments: Motor pulley

 

Optional equipments: Electric Motor 0.5 Hp 3 Ph Motor 1440 RPM with R & F Switch & V-Belt.

To cater the diverse requirements of the customers, we offer SEW P-4XG Bench Drilling Machine. The company is an eminent Manufacturer, Supplier and Exporter of SEW P-4XG Bench Drilling Machine from Gujarat. The Bench Drilling Machine we make available features high efficiency and reliable performance. Post-production, the entire range of Bench Drilling Machine undergoes strict quality checks before the final dispatch. Bulk orders of the Drilling Machines are delivered within well defined time period.

The SMTR-I Radial Drilling Machine With Fine Feed, provided by us, is acclaimed for its sturdy make. We are a quality centric company and thus, we follow strict quality standards throughout to offer quality products to the customers. Located in Bhavnagar(India), we have made our distinguished position in the market since our products are qualitative and of utmost standards.

Universal Radial Drilling Machine SSC-25 Technical Specification : Capacity : Drill Capacity 25 mm Drill Head : 1. Size of Morse Taper M-T-3 2. Spindle Strok 185 mm 3. No. of Spindle Speed 8 4. Range of Spindle Speed 73-1800 RPM Power : Spindle Driver Moter 1 HP 1440 RPM Arm Elevating Motor 0.5 HP 1400 RPM Spindle Drive V-Belt B-42 Arm Elevating V-Belt A-18 Working Table : L x M x W 250 x 200 x 200 mm Working Range : 1. Drilling Radius Max./Min. 715/360 mm 2. Distance from column to Spindle Max./Min. 650/295 mm 3. Max Drill Head Travel 355 mm 4. Distance from Base to Spindle Max./Min 900/125 mm 5. Diametere of Column 130 mm 6. Swivel of Arm L/R Side 90 Base Plate : 1. L x W x H 925x600x120 mm 2. Working Surface 600x500 mm 3. No. of Slot Size 3/ 16 mm 4. Overall Height 1500 mm Wooden case size L x W x H 1000x700x1600 mm

Universal Radial Drilling Machine SMTR-I Technical Specification : Capacity : M.S. C.I. Drill Capacity 38 mm 38 mm Drill Head : 1. Spindle nose MT 4 2. Spindle Travel 220 3. No. of Spindle Speed 8 4. Range of Spindle Speed 62-1980 5. Range of Power Feed mm / Rev. (2) 0.08-0.04 Power : H.P. V. Belt Main Motor 1.5 B-44 Arm Elevating Motor 0.5 A-23 Working Table : L x M x W mm. 380x300x300 Working Range : 1. Drilling Radius Max./Min. mm. 895/440 2. Distance from column to Spindle Max./Min. mm. 810/360 3. Max Drill Head Travel mm. 450 4. Distance from Base to Spindle Max./Min mm. 930/230 5. Diametere of Column mm. 165 6. Swivel of Arm L/R Side mm. 90 Base Plate : 1. L x W x H mm. 925x600x120 mm 2. Working Surface mm. 820x610 mm 3. No. of T-Slots mm. 4/16 mm 4. Overall Height mm. 2000 mm Wooden case size L x W x H mm. 1250x1550x2000 mm