Sibas Tech Chennai, Tamil Nadu

Hot plate welding is possibly the simplest plastic joining technique, used for various applications ranging from small automotive fluid reservoir vessels to pipelines in excess of 1000 mm in diameter.

• Weight1.097 kg
• Voltage700 + 1200 W, 800 + 800 W, 800 + 1400 W, 1200 + 1800 W
• Model3000 with 230 V ~
• DimensionsLength 220 mm, width 80 mm, height 90 mm

Pipe Welding Machine is a plastic welding machine for heating element butt welding of PE, PP and PVDF pipes and fittings for various OD. The basic machine has two large aluminium basic clamping tools which are swivelling up to 15° on each side for the fabrication of segmented bends. By screwing in 4 small reduction inserts, a double clamping is obtained at the smaller diameters. For fittings with short legs, a small fitting clamping tool is available. Due to the special construction of the pressure build-up device, the machine can be fixed directly at very short pipe ends on walls and sheets. Due to its light and compact construction as well as due to the horizontal and vertical motion, the machine is ideally suited for use in the pipeline system and for installation work. In the case of stationary use, the machine can be fixed in the vice or at the table support. The light and compact manual planer is operated by means of a ratchet.

The manual butt welding machine can be used for butt fusion of thermoplastic sheets (e.g. PVC-U, PE-HD, PP, PVDF). The surface of the heating element is Teflon coated. The temperature control system is digital and shows set and real temperature. A digital timer with an acoustic signal (for acoustic time control) is also included in the standard machine. The weld cycle is carried out manually by hand.

• Weight1.4 kg with mains connection lead
• Nominal voltage range120 V or 230 V~
• Frequency range50Hz - 60Hz
• Power120 V 1650 W or 230 V 1500 W
• Output temperature≤ 700°C
• Noise emission level< 70dB
• Protection classII /   (double insulation)