Shubham Enterprises

Bhosari, Pune, Maharashtra

We are manufacturing rotary machine cutters with best quality. because of our huge experience in packaging companies we are able to manufacture this product with such a best quality. we are also dealing with creasers in rotary machines. our product is of good quality. we manufacture this product as per the customers requirement.

WE ARE THE LARGEST INDUSTRIAL LED STREET AS WELL AS FLOOD LIGHT MANUFACTURER .OUR LED STREET LIGHTS WERE MANUFACTURED BY CONSIDERING ALL THE CONDITIONS AS WELL AS BY CONSIDERING ALLTHE SITUATIONS.OUR LED STREET LIGHT CONSUME LESS AMOUNT OF POWER AND GIVE BRIGHT FOCUS THIS LED STREET AND FLOOD LIGHTS ARE MANUACTURED AS PER THE CUSTOMERS REQUIREMENT.THIS LIGHTS ARE PURELY WATERPROOF WITH GAURENTEE

WE ARE SPECIALISED IN MANUFACTURING OF ROLLER HEATER FOR CORRUGATION MACHINE. WE ARE GOOD SERVICE PROVIDER OF THIS TYPE OF HEATER WE WERE MANUFACTURE THIS HEATER AS PER THE REQUIREMENT OF OUR CUSTOMERS.WE WERE CONSTANTLY DEALING WITH THE BEST QUALITY OF CORRUGATION MACHINE HEATER.

SPECIFICATIONS

• FOR 62 CORRUGATION MACHINE HEATER 440/3 PHASE ;11KW, 14KW
• FOR 52 CORRUGATION MACHINE HEATER 440/3 PHASE;9KW, 12KW
• FOR 45 CORRUGATION MACHINE HEATER 440/3 PHASE;7KW, 8KW
• FOR 42 CORRUGATION MACHINE HEATER 440/3 PHASE; 7KW, 8KW

THIS WATTAGE RATINGS AS WELL AS SIZE OF THE HEATERS ARE MADE AS PER THE CUSTOMERS RATINGS.

Features:1. Compacted Heating Elements for efficient heat transfer & longer life.2. Nichrome 80/20 or Kanthal Heating Coil.3. Heater tube sheath S.S. 304.4. Imported High grade MgO powder insulation for best heat transfer and electrical insulation.5. S.S.Terminal pins to prevent fusing and burning at terminals.6. Quick heating therefore economical and saves power.7. Center supporting rod made of M.S. for low power and S.S. for high power heaters.8. Durable and long lasting.9. Easy replaceability of individual elements.

Mostly used for heating up solids such as injection presses heating plates of various tools, they can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc They are also commonly found in the chemical, electronics, medical equipments, packing. Various cartridge heater technologies are available. The choice of technology will depend on technical specifications Required and the application.

Available technologies are:

• High-density cartridge heaters (HDC)
• for watt densities from 6.5to50W/cm2.
• Low-density cartridge heaters (LDC)
• for Watt densities from 1to6.5/cm2. Watt density ( W/cm)2 can be a decision factor, but dimensions heater and conditions of use (temperature, vibrations, environment) are also important factors when making the choice between the technologies.

Applications

Plastic processing machineries.Hot runner module.Food processing.Labeling machineries and a lot of other applications.

THIS TYPES OF HEATERS ARE REQUIRED IN SOME OVENS FOR HEATING PURPOSE.AS WELL AS IN SOME HEATING APPLICATION WE MANUFACTURE THIS PRODUCT AS PER THE CUSTOMERS REQUIREMENT ABOUT SIZE AND WATTAGE

WE ARE MANUFACTURING THIS TYPE OF HEATER AS PER THE CUSTOMERS REQUIREMENT AND SITUATIONS .We have emerged as a leading manufacturers and suppliers of a wide range of Heating Elements. These are manufactured at our well equipped fabrication unit by using qualitative raw material and advanced techniques the heating elements that we offer are used to a smaller cross section to increase the electrical resistance of the element thus reducing the current consumption.The offered range includes industrial water heating elements, immersion heating elements, electric heating elements, geyser heating elements, etc.

APPLICATIONS OF OIL IMMERSION HEATERS

• Heating low & heavy weight off
• Reducing oil viscosity & permitting better pumpability for transfer operations

AIR Heaters are normally used in forced circulation heating of low temperature air, other atmospheres and gases. Typical applications include forced convection heating of air, process atmospheres, and oven atmospheres in duct environments. Steel finned tubular heaters are standard with surface temperatures limited to about 425C (797F) compared to 815C (1500F) for an alloy sheathed non-finned heater. Some applications require stainless steel materials for corrosion resistance. The most efficient finned heaters are made with steel sheath and steel fins. Steel is normally used for air heating, stainless steel for atmospheres, which are humid or corrosive, and monel for salt-laden humid atmospheres. Keep in mind that stainless heaters with stainless fins are very inefficient since the heat transfer rate of stainless is less than one quarter that for steels. Finned Tubular Heaters offer distinct advantages over open coil heaters:

• They are safer to operate in that the risk of fire or electrical shock are minimized;
• They have a much longer service life; and
• They are more rugged requiring less maintenance than open coil heate

THIS HEATERS WERE MANUFACTURED AS PER THE CUSTOMERS REQUIREMENT.

APPLICATIONS

• Heating air in duct
• Warming equipment
• Food processing equipmet
• Process air equipment
• Heating steam & gas

Alakalineheaters are special purpose heaters used in chemical industries for heating some specific chemicals. Alkaline immersion heaters made of chrome nickel steel tube. For mounting on side of vessels, fitted with junction box for terminal protection.we manufacture this product as per customer requirement of size and wattage.

Applications:

• Heating alkaline solutions
• Solvent vapor cleaning
• Electroplating solution
• Wax, paraffin, fuel oil heating
• Chemical tank

WE ARE MANUFACTURING ALL TYPES OF HEATING CONTROL PANELS .WE MANUFACTURE THIS PANELS AS PER THE CUSTOMERS REQUIREMENT.BECAUSE OF OUR HUGE EXPERIENCE IN ELECTRICAL AS WELL AS HEATING EQUIPMENTS WE ARE ABLE TO MANUFACTURE THIS BEST PRODUCT FOR CUSTOMERS

WE ARE SPECIALISED IN MANUFACTURING OF THIS TYPE OF HEATERS.GLASS Heater ARE WIDELY used IN CHEMICAL INDUSTRIES , SPECIALLY IN ELECTROPLATING COMPANIES. These are manufactured FROM CERAMIC (BOBBIN)MATERIAL.IN THIS HEATERS WE USE HIGH QUALITY RESISTANCE WIRE.QUALITY OF OUR GLASS IS VERY TOUGH, IT LASTS ACCORDING TO THE MODE OF USE OF CUSTOMERS.

Applications:

• Chemical Industries
• Used for most cleaning solutions
• Alkaline solutions
• Anodizing & plating baths
• Nitric & chromic acid solutions
• Lead bended heater used in water, oil, food stuff