Shri Shyam Enterprises

Baltana, Zirakpur, Punjab

Digital Readout System (SW-4000) is easy to operate and comes with multiple functions for metrology and position. This Digital Readout System is best suited for various machine tools. We are ranked among the reliable Suppliers of this Digital Readout System. Specifications :

• Hardware Specifications :
• Input voltage : AC 90V - 240V
• Power Consumption : Max. 15W
• Dimension : 295 mm x 185 mm x 45 mm
• Weight : 1.45 kg
• Linear Scale Signals : Orthogonal TTL square wave, frequency 2 MHZ,
• Current : 1 mA
• Resolution Selection : 0.1µm, 0.2µm, 0.5µm, 1µm, 2µm, 5µm, 10µm, 20µm, 50µm
• Software Functions : Coordinate zero setting ½ calculation to locate work piece center
• Error Compensation : linear compensation ABS/ INC conversion, diameter/ radius selection Shrink function
• DIR : Setting the coordinate direction, Rotary Encoder : 10.0001 Instant power failure memory,
• RI Detection : setting and recalling a datum for machining Multiple machining functions bolt circle machining R-angle divide holes on an oblique line machining on an oblique line
• Order number : Arc Machining, Ramp machining (SW4000-2, SW4000-3), EDM machining (SW-4000-E), Edge detecting, Lathe function (optional)

D100 digital readout Product application: It is installed on straight line platforms of machine tools and works with grating linear scale to measure and position the machine tools.

Features : Independent touch-button is adopted with long service life. High-light nixie tube is adopted to show the figure clearly. High-frequency power supply is adopted with the functions of short circuit protection, overload protection and over-voltage protection.  Memorize current position without battery  Full-diction turning rest, facilitating operation  Fully integrated circuit design with small size, light weight and high stability.

Functions :  Reset coordinates  Circumferential hole  100 groups of SDM manufacture coordinates  Oblique lines hole  Mm/inch  Resetting and setting at any point  Power-off memory  ABS/INC coordinate  Linear error correction  Parting in the middle of coordinate  Radius/diameter transformation  Adjustable transformation of resolution ratio  Arc processing Calculator function Specification parameters for D100

SINGLE AXIS DRO 

Advantages

Easy to Install

Easy to store Machine Error compensation

Easy to operate

Suitable for All type of machines

 

This Digital Readout System (DC-3000) exhibits matchless efficiency in 2D data processing. This Digital Readout System is the best for measuring system using video and digital liner scales. This Digital Readout System is appreciated since it is easy to be connected with measuring microscope, optical comparator, video measuring system and other equipment for getting exact readouts. Specifications :

• Hardware Specifications :
• Input Voltage : AC 90V - 240V
• Power Consumption : Max. 15W
• Dimension : 295 mm x 185 mm x 68 mm
• Weight : 1.49 kg
• Linear Scale Signals : Orthogonal TTL square wave, frequency 2 MHZ
• Current : 1mA
• Settable Resolution : 0.1µm, 0.2µm, 0.5µm, 1µm, 2µm, 5µm, 10µm.
• Software Functions : Conveniently axis skew and coordinate shift, Quick data retrieval by foot-switch and edge detector, Print out user program, graphic elements and displayed three-axis coordinates, Transfer current linear scale positions to PC by RS232, graphic element, Storage : 100 permanent and 10 temporary, Record the measuring steps and the measure the same work pieces in batch quantity, Various coordinates Displaying Ways : Polar, Cartesian, INC and ABS coordinates in metric units or imperial units measure, preset and construct the graphic elements such as : point line circle angle distance, rectangle thread and so on correction for : linear error and segmental linear error, Connect with linear scale or rotary encoder with Z-axis

<p>Having quality components and materials, this <strong>Hercules Vertical Turret Milling Machine</strong> is appreciated for its low maintenance cost, ease-of-use, simple installation and long, hassle-free performances. We are amongst the reliable Suppliers of this Hercules Vertical Turret Milling Machine based in Chandigarh (Punjab). <br /> <br /> <strong>Specifications :</strong></p> <ul> <li><strong>Table size :</strong> 254&nbsp; x 1270 mm (10 x 50)</li> <li><strong>Longitudinal travel(X) :</strong> 760 mm</li> <li><strong>Vertical travel (Y) :</strong> 430 mm</li> <li><strong>Cross travel (Z) :</strong> 405 mm</li> <li><strong>Spindle Taper :</strong> R8 or NT30</li> <li><strong>Quill Travel :</strong> 127 mm</li> <li><strong>Spindle nose to table :</strong> 0-440 mm</li> <li><strong>Speed step number :</strong> 16</li> <li><strong>Spindle Speed :</strong></li> <ul> <li>U Low speed-70, 100, 180, 270, 600, 975, 1540 and 2310</li> <li>U High speed-140, 220, 360, 540, 1200, 1950, 3080, 4620</li> </ul> <li><strong>Quill Feed :</strong> 0.04, 0.08, 0.15</li> <li><strong>T-slot :</strong> slot no.&nbsp; Width: 3 x 16</li> <li><strong>Pitch :</strong> 63</li> <li><strong>Motor :</strong></li> <ul> <li><strong>Voltage :</strong> 380 V</li> <li><strong>Frequency :</strong> 50 Hz</li> <li><strong>Power :</strong> 3 HP</li> </ul> <li><strong>Overall dimension (L x W x H) :</strong> 1500 x1680 x 2100 mm</li> <li><strong>Max load on table :</strong> 300 kg</li> <li><strong>Net weight :</strong> 1200 kg</li> </ul> <p><br /> <strong>Standard Accessories :</strong></p> <ul> <li>Plastic cover</li> <li>Organ board cover</li> <li>Electrical box</li> <li>Controller</li> <li>Draw bar</li> <li>Tool box</li> <li>Tools</li> <li>Instructions</li> </ul> <p><br /> <strong>Optional Accessories :</strong></p> <ul> <li>Power Feed</li> <li>Vise</li> <li>Work lamp</li> <li>Collet set</li> <li>Clamping kits</li> <li>Digital readout system</li> <li>Collet</li> <li>Pump</li> <li>Chip pan</li> </ul>

BED SIZE- 10 X 50, 10 X 54"

TRAVEL- 850X400X450 MM

WITH DRO 2 AXIS OK_LINE (Made in india)

vice 6', collet set, clamping kit