Shrikrishna Agro Equipment Private Limited

Kothrud, Pune, Maharashtra

WORKING OF S1800:

• Insert wedge set into a pre-drilled hole (126 - 133 mm diameter, 2700 mm deep).
• S1800 cylinder pushes center wedge between two counter wedges.
• Applies a massive 5500-ton splitting force on the side wall of the rock hole.
• Results in efficient rock splitting with no noise or vibration.
• Splitting operation time for a single hole: 60 seconds.

Output:

S1800 boasts an impressive output of 400 to 500 m3 per day.

 Mounted on excavator from 20 ton to 40 ton

 Openface to distance 2.5ft & height 2 mtr

Launching new hydraulic rock splitter model S950 larger than S750 and little bit smaller than S1200. Mainly for building constructions and trenching work.

Working of S950: Wedge set inserted in pre-drilled hole of 76 mm diameter & 1400-1600mm deep. S950 cylinder pushes centre wedge between two counter wedges. Which applies a 3000-3500 ton splitting force on side wall of rock hole, resulting in splitting of rock without any noise and vibration. The splitting opration time for a single hole is 60 secs.

To obtain maximum output following steps recommended:

Step 1: Instert half of the total length of wedge and operate the splitter.

Step 2: Insert about 3/4^th of the total length of wedge to split again.

Step 3: Finally insert the total length of wedge and split to complete.

The S950 is ideal for open trenching, foundation blocks, and tunnel excavations. It can be mounted on a backhoe loader and is suitable for applications such as open pit excavation, shafts, micro-tunneling, building construction, and mining, particularly in areas with limited space.

Launching new hydraulic rock splitter model S750 larger than S240 and little bit smaller than S950. Mainly for building constructions and trenching work.

Working of S750: Wedge set inserted in pre-drilled hole of 76 mm diameter & 1200-1400 deep. S750 cylinder pushes centre wedge between two counter wedges. Which applies a 2000-2500 ton splitting force on side wall of rock hole, resulting in splitting of rock without any noise and vibration. The splitting opration time for a single hole is 60 secs.

To obtain maximum output following steps recommend:

Step 1: Insert half of the total length of wedge and operate the splitter.

Step 2: Insert about 3/4" of the total length of wedge to split again.

Step 3: Finally insert the total length of wedge and split to complete.

The S750 is ideal for open trenching, foundation blocks, and tunnel excavations. It can be mounted on a backhoe loader and is suitable for applications such as open pit excavation, shafts, micro-tunneling, building construction, and mining, particularly in areas with limited space.

Mainly use for Trenching works, for splitting the boulders, surface breaking and hard rock splitting

KEY SPECS OF S240

* Single person can easily use to perform operation.

* Hydraulic Rock Splitter produces force of 505 Tons.

* Hydraulic Rock Splitter can work under water.

* Powerful on all types of ground strata.

* It can be used vertical and horizontal direction.

* Performs smooth splitting operation.

* Noiseless, environment — friendly and dust free operation.

* Operator can easily learn to operate the splitter within a short time.

HYDRAULIC SPREADER

The function of spreading, tearing, clamping, Pulling etc. Without the need of changing working head. The working head with unique anti-skid design. The manual reversing valve equipped with neutral automatic retract after release of grip makes operation convenient and more safe.

SHS-600 Mainly Use For

• Car Bonet opening in rescue opration
• Spreading a lift door
• Spreading the grills
• Spreading the MS Tubes

Lightweight Powerhouse: Shrikrishna's S90 Hydraulic Rock Splitter Sets New Standards

The Shrikrishna Equipment hydraulic rock splitter stands out as a widely favored rock splitting solution in India. Crafted from robust aluminum and special steel, its splitting cylinder boasts high strength while remaining lightweight for effortless handling. This design facilitates exceptional performance pressure, enabling rapid and efficient splitting. Whether positioned horizontally or vertically, this hydraulic splitter outperforms by delivering swift results and increased output. The product line includes various models such as S36S, S36, S90, and S240, catering to diverse needs in concrete and rock cracking and splitting.

Mainly use for Trenching works, For splitting the boulders, surface breaking and Hard rock Splitting.

SOLID STRENGTH, SWIFT SPLITTING

Experience the Excellence of Robust Aluminum and Special Steel

Wedge set inserted in pre-drilled hole of 108-118 mm diameter and 1800 mm deep. S1200 cylinder pushes centre wedge between two counter wedges. Which applies a 2500 ton splitting force on side wall of rock hole, resulting in splitting of rock without any noise and vibration. The output of the S1200 will be 250 to 300 m³ per day.

WORKING OF S-1200:

• Insert wedge set into a pre-drilled hole (108 - 118 mm diameter, 1800 mm deep).
• S1200 cylinder pushes center wedge between twocounter wedges.
• Applies a 2500 ton splitting force on the side wall of the rock hole.
• Results in rock splitting without noise or vibration.
• Splitting operation time for a single hole: 60 seconds.

TO OBTAIN MAXIMUM OUTPUT FOLLOWING STEPS RECOMMENDED:

Step 1: Insert half of the total length of wedge and operate the splitter.

Step 2: Insert about 3/4th of the total length of wedge to split again.

Step 3: Finally insert the total length of wedge and split to complete.

The S1200 is ideal for open trenching, foundation blocks, and tunnel excavations. It can be mounted on a excavator and is suitable for applications such as open pit excavation, shafts, micro-tunneling, building construction and mining.

HYDRAULIC COMBI TOOL

Unstoppable Rescue Operations

The hydraulic Combi Tool is used for rescue operations in Road, railway, air, marine crash rescue, earthquake & other cisaster rescue, building-collapse. This cutter and spreader tool can deform metal structures or shear metal of vehicles by spreading or cutting. The hydraulic cutter and spreacler tool can move heavy object.

The Hydraulic C Cutter is a specialized tool designed for both emergency rescue operations and industrial applications, such as scrapping and recycling. Widely used in firefighting, vehicle extrication, and disaster response, it is also highly effective in vehicle dismantling and metal recycling, where cutting through tough materials is critical. This versatile tool plays a vital role in emergency services and industrial sectors, delivering reliable and powerful cutting action for both life-saving missions and sustainable material processing tasks.

KEY SPECS OF S36

* Single person can easily use to perform operation.

* Hydraulic Rock Splitter produces force of 460 Tons.

* Hydraulic Rock Splitter can work under water.

* Powerful on all types of ground strata.

* It can be used vertical and horizontal direction.

* Performs smooth splitting operation.

* Noiseless, environment — friendly and dust free operation.

* Operator can easily learn to operate the splitter within a short time.

Mainl;u used for Pile breaking, Slab breaking, Trenching works and for splitting the boulders.

Unleashing Efficiency with Hydraulic Rock Splitters S36S for Swift Rock and Concrete Splitting

Shrikrishna Equipment hydraulic rock splitter is one of the most popular rock splitter products in India. This rock splitter material of the splitting cylinder is high strength aluminum and special steel material. It is light weight easy to handle and creating high performance pressure. Hydraulic splitter splits much faster and gives greater output, it can be used for horizontal as well as vertical position for cracking or splitting concrete and rocks. The Hydraulic rock splitters are available in different models S36S, S36, S90, S240.

KEY SPECS OF S36S

» Single person can easily use to perform operation.

» Hydraulic Rock Splitter produces force of 319 Tons.

» Hydraulic Rock Splitter can work under water.

» Powerful on all types of ground strata.

» It can be used vertical and horizontal direction.

» Performs smooth splitting operation.

» Noiseless, environment — friendly and dust free operation.

» Operator can easily learn to operate the splitter within a short time.

Mainly use for Slab breaking, Trenching works and for splitting the boulders.