Ctype Blades can naturally pull the object to the position with the max cut force, it can concentrate the strength and make cutting more efficient. The cutting edge is designed for splash prevention.

FEATURES:

• High strength light alloy steel blade, lightweight, strong cutting force, high toughness, regrinding possible.
• The equipment body adopts lightweight high strength aluminum alloy material with ceramic coating on surface, artistic and suitable for underwater operation.
• C type Blades can naturally pull the object to the position with the max cut force.
• Cutting more efficient.
• The manual reversing valve equipped with neutral automatic reset makes operation convenient and more accurate.
• Adopt bidirectional hydraulic lock, with self - locking function.

Shrikrishna manufactures most powerful hydraulic power packs powered by petrol and diesel engines which are fuel efficient. High quality raw material is used which can withstand high hydraulic pressures for longer durations. This power packs generates operating pressure of 50 MPA (500 BAR). With this single power pack 5 tools can be operated at a time .

THERE ARE THREE VERSIONS OF POWER PACKS

• Diesel Engine.
• Petrol Engine.
• Electrical Motor.

Wedge set inserted in pre-drilled hole of 100 -102 mm diameter and 1800 mm deep. S-1200 cylinder pushes centre wedge between two counter wedges. Which applies a 2500 ton splitting force on side wall of rock hole, resulting in splitting of rock without any noise and vibration. The output of the S-1200 will be @ 250 to 300 m per day.

TO OBTAIN MAXIMUM OUTPUT FOLLOWING STEPS RECOMMENDED:

• Step 1: Insert half of the total length of wedge and operate the splitter.
• Step 2: Insert about 3/4th of the total length of wedge to split again.
• Step 3: Finally insert the total length of wedge and split to complete.
• S-1200 can be used for open trenching, foundation blocks. Tunnel excavations.
• The splitter can be mounted on crane & normal excavate open pits, shafts, micro tunneling etc.

Hydraulic concrete crusher tool is ideal in the demolition of concrete. It assures operation without noise, dust, percussion and vibration that can cause damage and dangerous situations to the structures. The crusher is used by one single operator and can break with incredible power and precision. It is effective in concrete reinforced and non-reinforced, brick walls, structures in composite stones and masonry, ceilings, columns, stairways and every concrete section that can be attacked by the jaws, including rescue operations. These crushers smash concrete into small manageable pieces. They are able to separate steel reinforcement from the concrete pieces.

FEATURES

The function of spreading, tearing, clamping, Pulling etc. Without the need of changing working head. The working head with unique anti-skid design, good anti- skidding performance. The manual reversing valve equipped with neutral automatic reset makes operation convenient and more accurate.

FEATURES:

• With the function of spreading, tearing, clamping, pulling etc. Without the need of changing working head.
• The working head with unique anti-skid design, good anti-skidding performance
• Adopt bidirectional hydraulic lock, with self - locking function
• The equipment body adopts lightweight high strength aluminum alloy material with ceramic coating on surface, artistic and suitable for underwater operation
• The handle is easy for left- and right-hand operation, moving parts have protecting jacket to ensure operator's safety.
• The spreader head is embedded in the spreader arm with flat structure which can wedge narrow gap to carry out fast rescue.

hrikrishna Equipment hydraulic rock splitter is one of the most popular rock splitter products in India. This rock Splitter material of the splitting cylinder is high strength aluminum and special steel material .It is light weight easy to handle and creating high performance pressure. Hydraulic splitter splits much faster and gives greater output, it can be used for horizontal as well as vertical position for cracking or splitting concrete and rocks. The Hydraulic rock splitters are available in three models S-36, S-90, S-240.

hrikrishna manufactures most powerful hydraulic power packs powered by petrol and diesel engines which are fuel efficient. High quality raw material is used which can withstand high hydraulic pressures for longer durations. This power packs generates operating pressure of 50 MPA (500 BAR). With this single power pack 5 tools can be operated at a time .

Ctype Blades can naturally pull the object to the position with the max cut force, it can concentrate the strength and make cutting more efficient. The cutting edge is designed for splash prevention.

FEATURES:

• High strength light alloy steel blade, lightweight, strong cutting force, high toughness, regrinding possible.
• The equipment body adopts lightweight high strength aluminum alloy material with ceramic coating on surface, artistic and suitable for underwater operation.
• C type Blades can naturally pull the object to the position with the max cut force.
• Cutting more efficient.
• The manual reversing valve equipped with neutral automatic reset makes operation convenient and more accurate.
• Adopt bidirectional hydraulic lock, with self - locking function.

Shrikrishna manufactures most powerful hydraulic power packs powered by petrol and diesel engines which are fuel efficient. High quality raw material is used which can withstand high hydraulic pressures for longer durations. This power packs generates operating pressure of 50 MPA (500 BAR). With this single power pack 5 tools can be operated at a time .

THERE ARE THREE VERSIONS OF POWER PACKS

• Diesel Engine.
• Petrol Engine.
• Electrical Motor.

Wedge set inserted in pre-drilled hole of 100 -102 mm diameter and 1800 mm deep. S-1200 cylinder pushes centre wedge between two counter wedges. Which applies a 2500 ton splitting force on side wall of rock hole, resulting in splitting of rock without any noise and vibration. The output of the S-1200 will be @ 250 to 300 m per day.

TO OBTAIN MAXIMUM OUTPUT FOLLOWING STEPS RECOMMENDED:

• Step 1: Insert half of the total length of wedge and operate the splitter.
• Step 2: Insert about 3/4th of the total length of wedge to split again.
• Step 3: Finally insert the total length of wedge and split to complete.
• S-1200 can be used for open trenching, foundation blocks. Tunnel excavations.
• The splitter can be mounted on crane & normal excavate open pits, shafts, micro tunneling etc.

Hydraulic concrete crusher tool is ideal in the demolition of concrete. It assures operation without noise, dust, percussion and vibration that can cause damage and dangerous situations to the structures. The crusher is used by one single operator and can break with incredible power and precision. It is effective in concrete reinforced and non-reinforced, brick walls, structures in composite stones and masonry, ceilings, columns, stairways and every concrete section that can be attacked by the jaws, including rescue operations. These crushers smash concrete into small manageable pieces. They are able to separate steel reinforcement from the concrete pieces.

FEATURES

The function of spreading, tearing, clamping, Pulling etc. Without the need of changing working head. The working head with unique anti-skid design, good anti- skidding performance. The manual reversing valve equipped with neutral automatic reset makes operation convenient and more accurate.

FEATURES:

• With the function of spreading, tearing, clamping, pulling etc. Without the need of changing working head.
• The working head with unique anti-skid design, good anti-skidding performance
• Adopt bidirectional hydraulic lock, with self - locking function
• The equipment body adopts lightweight high strength aluminum alloy material with ceramic coating on surface, artistic and suitable for underwater operation
• The handle is easy for left- and right-hand operation, moving parts have protecting jacket to ensure operator's safety.
• The spreader head is embedded in the spreader arm with flat structure which can wedge narrow gap to carry out fast rescue.

hrikrishna Equipment hydraulic rock splitter is one of the most popular rock splitter products in India. This rock Splitter material of the splitting cylinder is high strength aluminum and special steel material .It is light weight easy to handle and creating high performance pressure. Hydraulic splitter splits much faster and gives greater output, it can be used for horizontal as well as vertical position for cracking or splitting concrete and rocks. The Hydraulic rock splitters are available in three models S-36, S-90, S-240.

hrikrishna manufactures most powerful hydraulic power packs powered by petrol and diesel engines which are fuel efficient. High quality raw material is used which can withstand high hydraulic pressures for longer durations. This power packs generates operating pressure of 50 MPA (500 BAR). With this single power pack 5 tools can be operated at a time .