Shrid Surface Technlogies

Pashan, Pune, Maharashtra

Clients can avail from us Hot Forging Lubricant that is a water based lubricant having graphite. The especially developed Hot Forging Lubricant is non-hazardous and non-flammable metal forming lubricant. Hot Forging Lubricant is ideal for heavy press forging operations. Specialties

• No job sticking
• Improved Surface Finish
• Die life improvement
• High content of quality graphite
• Economical

Hot Forging Die Release Graphite Lubricant (TRIBO-29) is smokeless, water based graphite die release lubricant, which is effective for difficult mechanical press work and highly automated facilities. It forms a uniform dry film coating when spayed on dies at temperatures exceeding 590^oF or 310^oC. We are one of the leading Manufacturers and Suppliers of Hot Forging Die Release Graphite Lubricant. One can obtain Hot Forging Die Release Graphite Lubricant from us in small as well as bulk quantities. Properties :

• Ph : 8-11
• Self life : 6 Months under original seal.

Application :Demoulding lubricant for Hot Forging of steel especially more difficult work, Precision forging, Stainless steel, Nonferrous metal and Aluminum Extrusion. Usage :Dilution - For initial trial one part of TRIBO-29 to 10 parts of water by volume is suggested. We recommend determining dilution ratio during operation according to the condition of the die surface and the working condition. Application tool :

• Use spray Gun (Recommended) or Brush.
• Special character
• Excellent lubricity
• Good release properties
• Extends die life,
• Die temperature control by the dilution ratio adjustment,
• NON FLAMMABLE
• Non corrosive
• Smokeless
• No fumes or toxic cases

Reference :Adjusted to protect the capacity loss when freezing in winter season, but will be good storage indoor (keeping Temp, when below -5^oC) Package :

• 220L Drum.
• 35L Open Top

Storage :Store TRIBO-29 in a cool place, be cautious not to freeze.

Hot Forging Die Release Non Graphite Lubricant (S-18) is a de-moulding lubricant used for hot forging. We are named among the renowned Manufacturers and Suppliers of Hot Forging Die Release Non Graphite Lubricant. It is formulated using the latest techniques at our well-equipped production unit. Moreover, our Hot Forging Die Release Non Graphite Lubricant is subjected to stringent quality tests. One can obtain Hot Forging Die Release Non Graphite Lubricant from us at a very reasonable price.
Application : Die release lubricant for hot forging of steel, stainless steel, Non ferrous metal and aluminum extrusions. Usage : Dilution : The dilution ratio depends on the workability of the job and the condition of the die. Ratio of 1: 810 (product : water) is suggested for first trial. In some cases it can be diluted with water more than 20 times. Application Tool : Spray (manual or automatic) Special Character :

• Non-Flammable,
• No gas generation,
• No Odor,
• Non-polluting,
• Excellent demoulding properties
• Increased die life time.

Reference : Adjusted to protect the capacity loss when freezing in winter season. But will be good storage indoor (keeping temperature, when below -5c) Package :

• 220L Drum
• 35L Open Drum

Storage : Store S18 in a cool place, be cautious not to freeze.

Oil Forging Lubricant (FL) that we offer is a synthetic lube made using oil, graphite and other additives. It is used for extrusion of non-ferrous metal and for forging of metal in order to improve the fineness of parts and the life span of dies. We are one of the prominent Manufacturers and Suppliers of Oil Forging Lubricant. We have developed a vast distribution network that enables us to deliver retail as well as bulk orders for Oil Forging Lubricant on time. Properties :

• Sp. Gr. : 0.93 (1/4c)
• Flash Point : 218^oC
• Viscosity : 200cst at 40^oC (FL) 400cst at 40^oC (F9)

Main ingredients : Synthetic Oil, Graphite, Molybdenite. Application :Extrusion of non-ferrous metal and release lubricant for hot forging of metal, stainless steel, steel, copper and aluminum gears, valve and FAUCET. Usage :

• FL is the oily Liquid.
• FL cannot be sprayed and should be applied directly onto die.

Storage : Keep it in a safe place, avoid the Fire. Self Life : 6 months under the original seal.

Warm Forging Die Release Graphite Lubricant (TRIBOW-100), offered by us, is a smokeless water-based lubricant, which is effective for difficult mechanical press work. It forms a uniform dry film coating when sprayed on dies. We are one of the eminent Manufacturers and Suppliers of Warm Forging Die Release Graphite Lubricant. We supply Warm Forging Die Release Graphite Lubricant only after the completion of stringent testing procedures. Features :

• Excellent lubricity,
• Good release properties,
• Extends die life Die temperature control by the dilution ratio adjustment,
• Non-flammable,
• Non corrosive,
• Smokeless,
• No fumes or Toxic cases.

Application :Demoulding lubricant for warm forging of Copper, Bronze, Aluminum extrusions especially more difficult and Precision forging. Usage : Dilution : For initial trials one part of TRIBOW-100 to three parts of water by volume is suggested. We recommend determining dilution ratio during operation according to the condition of Die surface and the working conditions. Storage :

• Storage TRIBOW : 100 in a cool place. Be cautious not to freeze.
• Self Life : 6 months under the original seal.

We bring forth finely formulated Graphite Plunger Lubricant (S 385) for the market across the country. We are counted among the eminent Manufacturers and Suppliers of Graphite Plunger Lubricant in Pune, Maharashtra. This Lubricant comes to the aid of the industries where the lubrication demand is for automatic lubricating systems of the die-cast plunger. It is composed of mineral oils, fats, and pure graphite materials, present in precise percentage. Characteristics :

• High-efficiency lubricant
• Good adherence to metal surfaces
• No deposition on materials can be found after thorough stirring

Our Oil-Based Plunger Lubricant (S 350) is offered without even a hint of graphite and with the characteristic that works on improving the surrounding conditions. The Lubricant is formulated using selective raw materials. Its quality and efficiency knows no bound. It is doled out enclosed in pail can of 18 liters capacity. We are often called as the eminent Manufacturer and Supplier of Oil-Based Plunger Lubricant in Pune, Maharashtra. Characteristics :

• Non-graphite
• Improves the functioning of conservative machines and also the surrounding conditions of other machines
• Fit for lubrication even at high-temperatures
• Excellent for leakages
• Helps in improving abrasion resistance

Using Methods :This Lubricant Using in Generally that Wooden Cotton Sticks or Brushing, and Loading type By Automatic Supply Units, But the Best Methods is Automatic Supply Unit System.

• When Spraying : Available Kerosene or Light Oil Mixing W/above Mentioned Character's terms and Possible Range(but, Too Much Consumption)
• When Automatic Supply Unit : Available Small Loading Thru the Automatic Supply Unit As origin Liquid
• When Brushing , Cotton Sticks : Available Small Volumes Paste Inside of the Plunger sleeve.
• Will Be Same Grade Efficiency W/graphite Lubricant. this Product 350 Will Be Most suitable Under Special Condition.

Package : 18â, Pail Can.

Our Water-Based Die Casting Lubricant (S 1920) is ideal for high-pressure zinc and aluminum. This Lubricant is endowed with excellent die release and excellent thermal resistance properties, which further make it count among the efficient lubricants on the counter for sale. It has good match of physical and chemical attributes. We are one of the top-notch Manufacturers and Suppliers of Water-Based Die Casting Lubricant in Pune, Maharashtra. Typical Physical Properties :

• Appearance (20â) : Milky white Emulsion Liquid
• pH : 8.5 ± 1.0
• Density (15/4â) : 0.988 ± 0.05
• Brix(%) : 17±1
• Flash Point : None
• Lubricant : Processed silicon poly ethylene
• Carrier : Water
• Solid content : 2022%

Advantage :

• Excellent thermal resistance
• Superior Surface finishing of castings
• Excellent die release
• Non-Toxic

Dilution Ratio : It is different depend on small & large part but it is generally recommend to use 50:1 120:1. And it depends on working condition and spray equipment. Tests shall be necessary before applying for main production to know correct ratio of using for each application. Caution and Storage : Avoid Direct Sun-light & do not storage below